Achieving mixed halide perovskite via halogen exchange during vapor-assisted solution process for efficient and stable perovskite solar cells
Source abstract
Abstract
Abstract The halide-mixed CH 3 NH 3 PbX 3-y I y (X = Cl, Br) (MAPbX 3-y I y ) films have tunable band gaps for applications in perovskite solar cells (PSCs). The performances of PSCs can be further adjusted by halide mixing of perovskite films. Preparing the MAPbX 3-y I y films by low pressure vapor-assisted solution process (LP-VASP) could achieve pin-hole free perovskite films, which has the potential to mass production of perovskite films. In this study, the MAPbX 3-y I y (X = Cl, Br) thin films are prepared by exposing PbI 2 films in various amine salts vapor and applied to fabricate the planar PSCs. Systematical structural-property investigations on the MAPbI 3-y X y (X = Cl, Br) thin films demonstrate that the halide-mixed perovskite films could be achieved by adopting different amine salts. The MAPbI 3 /MAPbCl 3 biphasic constitution is observed in perovskite films using pure MACl, while the MAPbI 3-y Cl y (y ≈ 0) could be obtained using MACl:MAI mixture. Using pure MABr or MABr:MAI mixture, the MAPbBr 3-y I y films are prepared. The XRD and XPS results indicate that there is no remnant Cl in the MAPbI 3-y Cl y (y ≈ 0) films, nor I in the MAPbBr 3-y I y (y ≈ 0) films. Because the amine salts are excess, the halogen in amine salts mainly decide the halogen in CH 3 NH 3 PbX 3 in our study. Moreover, the MAPbCl 3-y I y (y ≈ 0) and MAPbBr 3-y I y based PSCs are demonstrated to behave better stability than the MAPbI 3 based PSC under continuous illumination at AM 1.5G. Furthermore, the planar PSCs based on 15 wt% MACl mixed MAI exhibit power conversion efficiency of 17.3% with good stability over 3600 h.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
2. Bright light-emitting diodes based on organometal halide perovskite10.1038/nnano.2014.149 ↗
3. Two-dimensional CH3NH3PbI3 perovskite: synthesis and optoelectronic application10.1021/acsnano.5b07791 ↗
4. NREL Best Research-Cell Efficiencies Chart. http://www.nrel.gov/ncpv/images/efficiency_chart.jpg (accessed April 2017).
5. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via lewis base adduct of lead(II) iodide10.1021/jacs.5b04930 ↗
6. Effective and reproducible method for preparing low defects perovskite film toward highly photoelectric properties with large fill factor by shaping capping layer10.1016/j.solener.2016.07.034 ↗
7. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
8. A mixed-cation lead mixed-halide perovskite absorber for tandem solar cells10.1126/science.aad5845 ↗
9. Nanocrystals of cesium lead halide perovskites (CsPbX3, X=Cl, Br, and I): novel optoelectronic materials showing bright emission with wide color Gamut10.1021/nl5048779 ↗
10. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
11. Navigating organo-lead halide perovskite phase space via nucleation kinetics toward a deeper understanding of perovskite phase transformations and structure-property relationships10.1002/smll.201403651 ↗
12. An efficient planar-heterojunction solar cell based on wide-bandgap CH3NH3PbI2.1Br0.9 perovskite film for tandem cell application10.1039/C5CC07673K ↗
13. Room-temperature mixed-solvent-vapor annealing for high performance perovskite solar cells10.1039/C5TA08565A ↗
14. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
15. MAPbI3-xClx mixed halide perovskite for hybrid solar cells: the role of chloride as dopant on the transport and structural properties10.1021/cm402919x ↗
16. Recombination study of combined halides (Cl, Br, I) perovskite solar cells10.1021/jz5006797 ↗
17. Voltage output of efficient perovskite solar cells with high open-circuit voltage and fill factor10.1039/C4EE00762J ↗
18. Growth and evolution of solution-processed CH3NH3PbI3-xClx layer for highly efficient planar-heterojunction perovskite solar cells10.1016/j.jpowsour.2015.10.023 ↗
19. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
20. The influence of chloride on interdiffusion method for perovskite solar cells10.1016/j.matlet.2016.01.114 ↗
21. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
22. Bromide regulated film formation of CH3NH3PbI3 in low-pressure vapor-assisted deposition for efficient planar-heterojunction perovskite solar cells10.1016/j.solmat.2016.08.027 ↗
23. Solvent and intermediate phase as boosters for the perovskite transformation and solar cell performance10.1038/srep25648 ↗
24. Low cost, high throughput and centimeter-scale fabrication of efficient hybrid perovskite solar cells by closed space vapor transport10.1002/pssr.201510386 ↗
25. Fabrication of planar heterojunction perovskite solar cells by controlled low-pressure vapor annealing10.1021/jz502720a ↗
26. CH3NH3Cl-Assisted one-step solution growth of CH3NH3PbI3 structure, charge carrier dynamics, and photovoltaic properties of perovskite solar cells10.1021/jp502696w ↗
27. The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells10.1038/ncomms8269 ↗
28. A halide exchange engineering for CH3NH3PbI3−xBrx perovskite solar cells with high performance and stability10.1016/j.nanoen.2015.11.024 ↗
29. Chlorine-conducted defect repairment and seed crystal-mediated vapor growth process for controllable preparation of efficient and stable perovskite solar cells10.1039/C5TA06813D ↗
30. Efficient hybrid mesoscopic solar cells with morphology-controlled CH3NH3PbI3-xClx derived from two-step spin coating method10.1021/am5057807 ↗
31. High performance perovskite solar cells10.1002/advs.201500201 ↗
32. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
33. Controllable perovskite crystallization at a gas-solid interface for hole conductor-free solar cells with steady power conversion efficiency over 10%10.1021/ja509245x ↗
34. Uniform, stable, and efficient planar-heterojunction perovskite solar cells by facile low-pressure chemical vapor deposition under fully open-air conditions10.1021/am5077588 ↗
35. Comparative study of vapor- and solution-crystallized perovskite for planar heterojunction solar cells10.1021/am508495r ↗
36. Efficient planar perovskite solar cells prepared via a low-pressure vapor-assisted solution process with fullerene/TiO2 as an electron collection bilayer10.1039/C6RA14372E ↗
37. Mixed-halide CH3NH3PbI3-xXx (X=Cl, Br, I) perovskites: vapor-assisted solution deposition and application as solar cell absorbers10.1002/cphc.201600230 ↗
38. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
39. CH3NH3PbCl3 single crystals: inverse temperature crystallization and visible-blind UV-photodetector10.1021/acs.jpclett.5b01666 ↗
40. Reversible halide exchange reaction of organometal trihalide perovskite colloidal nanocrystals for full-range band gap tuning10.1021/acs.nanolett.5b01430 ↗
41. Large grained perovskite solar cells derived from single-crystal perovskite powders with enhanced ambient stability10.1021/acsami.6b02169 ↗
42. Methylammonium lead bromide perovskite-based solar cells by vapor-assisted deposition10.1021/jp512936z ↗
43. Trap-assisted non-radiative recombination in organic-inorganic perovskite solar cells10.1002/adma.201405372 ↗
44. Two-inch-sized perovskite CH3NH3PbX3 (X=Cl, Br, I) crystals: growth and characterization10.1002/adma.201502597 ↗
45. MAPbI3-xBrx mixed halide perovskites for fully printable mesoscopic solar cells with enhanced efficiency and less hysteresis10.1039/C6NR01043A ↗
46. Efficient hole-blocking layer-free planar halide perovskite thin-film solar cells10.1038/ncomms7700 ↗
47. Multifunctional benzoquinone additive for efficient and stable planar perovskite solar cells10.1002/adma.201603808 ↗
48. Degradation mechanisms of solution-processed planar perovskite solar cells: thermally stimulated current measurement for analysis of carrier traps10.1002/adma.201502610 ↗