journal article·2017-03

Impact of perovskite precursor solution temperature on charge carrier dynamics and photovoltaic performance of perovskite based solar cells

Gon Namkoong, Abdullah A. Mamun, Tanzila Tasnim Ava, Kai Zhang, Helmut Baumgart

Publisher page

Abstract

Abstract Even though perovskite based solar cells have been routinely fabricated with preheated perovskite solutions, currently the underlying mechanism of how the perovskite precursor solution temperature influences perovskite solar cells has not been studied yet. Therefore, we investigated the impacts of perovskite solution temperatures on charge carrier dynamics of perovskite film and perovskite solar cell performance that were quantitatively analyzed using steady-state photoluminescence (PL), time-resolved emission spectra (TRES), excitation-dependence of PL and current-voltage measurements. It is found that the perovskite solution temperature greatly influenced the morphologies, defect densities and states, and charge recombination dynamics of perovskite thin films. Particularly, steady-state and time-resoled PL measurements revealed that perovskite thin films prepared with the perovskite solution temperature around 70 °C produced lowest surface and bulk defect densities. In addition, it is found that the perovskite solution temperature around 70 °C led to exciton-like transitions while lower and higher solution temperatures led to defect-mediated recombination of perovskite thin films. Such recombination dynamics of perovskite films strongly influenced the light absorption and extraction efficiencies of photogenerated charge carriers which in turn influenced short-circuit current, fill factor, and open circuit voltage of perovskite solar cells. As a result, better photovoltaic performance of perovskite solar cells was observed when prepared with the precursor temperature around 70 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
2. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
3. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
4. o-Methoxy substituents in spiro-OMeTAD for efficient inorganic–organic hybrid perovskite solar cells10.1021/ja502824c ↗
5. Perovskite solar cells: an emerging photovoltaic technology10.1016/j.mattod.2014.07.007 ↗
6. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
7. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/anie.201405334 ↗
8. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
9. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
10. Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructures10.1039/c3ra43228a ↗
11. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
12. Efficient perovskite solar cells by temperature control in single and mixed halide precursor solutions and films10.1021/acs.jpcc.5b08294 ↗
13. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
14. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
15. Chemically, spatially, and temporally resolved 2D mapping study for the role of grain interiors and grain boundaries of organic-inorganic lead halide perovskites10.1016/j.solmat.2016.06.008 ↗
16. Resonance raman and excitation energy dependent charge transfer mechanism in halide-substituted hybrid perovskite solar cells10.1021/nn507345e ↗
17. Low-temperature solution-processed wavelength-tunable perovskites for lasing10.1038/nmat3911 ↗
18. Influence of growth temperature on bulk and surface defects in hybrid lead halide perovskite films10.1039/C5NR06222E ↗
19. Exciton localization in solution-processed organolead trihalide perovskites10.1038/ncomms10896 ↗
20. Impact of microstructure on local carrier lifetime in perovskite solar cells10.1126/science.aaa5333 ↗
21. Excitation-power dependence of the near-band-edge photoluminescence of semiconductors10.1103/PhysRevB.45.8989 ↗
22. Excitation-power dependence of free exciton photoluminescence of semiconductors10.1143/JJAP.44.6113 ↗
23. Excitons versus free charges in organo-lead tri-halide perovskites10.1038/ncomms4586 ↗