journal article·2011-03Open access

Enhanced charge transport by incorporating additional thiophene units in the poly(fluorene-thienyl-benzothiadiazole) polymer

Zhuoying Chen, Junfeng Fang, Feng Gao, Thomas J.K. Brenner, Kulbinder K. Banger, Xingzhu Wang, Wilhelm T.S. Huck, Henning Sirringhaus

Organic Electronics· Volume 12· Issue 3

Abstract

Abstract We report a comparative study of optical properties, structure and morphology, field-effect transistor (FET) and solar cell performance between poly(4-(3,4′-dihexyl-2,2′-bithiophen-5-yl)-7-(5′-(9,9-dioctyl-9H-fluoren-2-yl)-3,4′-dihexyl-2,2′-bithiophen-5-yl)benzo[c][1,2,5]thiadiazole) (F8TTBTT), and its predecessor poly((9,9-dioctylfluorene)-2,7-diyl-alt-[4,7-bis(3-hexylthien-5-yl)-2,1,3-benzothiadiazole]-2′,2″-diyl) (F8TBT). Compared to F8TBT, F8TTBTT has two more thiophene units incorporated in its monomer structure. Such a modification leads to a reduced optical band gap, improved charge injection and significantly enhanced ambipolar field-effect mobilities reaching 5 × 10−2 cm2 V−1 s−1 for holes and 4 × 10−3 cm2 V−1 s−1 for electrons. The enhanced carrier mobilities are most likely a result of an increased backbone planarization and interchain interaction. As a consequence of ambipolar transport, light-emission was observed from the transistor channel during operation. The reduced band gap and improved charge transport make F8TTBTT an interesting candidate also for solar cell applications. Unoptimized solar cells based on F8TTBTT:PCBM blends were found to exhibit power conversion efficiency under AM 1.5 illumination of ∼1.54%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Semiconducting thienothiophene copolymers: design, synthesis, morphology, and performance in thin-film organic transistors10.1002/adma.200801650 ↗
2. Conjugated-polymer blends for optoelectronics10.1002/adma.200900783 ↗
3. Heterojunction solar cells: the role of processing in the fabrication and optimization of plastic solar cells10.1002/adma.200802559 ↗
4. Electron and ambipolar transport in organic field-effect transistors10.1021/cr0501543 ↗
5. Synthesis and thin-film transistor performance of poly(4, 8-didodecylbenzo[1, 2-b:4, 5-b]dithiophene)10.1021/cm0602592 ↗
6. Controlling the orientation of terraced nanoscale “ribbons” of a poly(thiophene) semiconductor10.1021/nn800574f ↗
7. A high-mobility electron-transporting polymer for printed transistors10.1038/nature07727 ↗
8. Mobility enhancement in conjugated polymer field-effect transistors through chain alignment in a liquid-crystalline phase10.1063/1.126991 ↗
9. Charge density and film morphology dependence of charge mobility in polymer field-effect transistors10.1002/adma.200304653 ↗
10. Insulators as the choice of dielectrics in organic field-effect transistors10.1002/adfm.200390030 ↗
11. General observation of N-type field-effect behaviour in organic semiconductors10.1038/nature03376 ↗
12. Effects of packing structure on the optoelectronic and charge transport properties in poly(9,9-di-n-octylfluorene-alt-benzothiadiazole)10.1021/ja051891j ↗
13. Organic complementary-like inverters employing methanofullerene-based ambipolar field-effect transistors10.1063/1.1812577 ↗
14. High mobility ambipolar charge transport in polyselenophene conjugated polymers10.1002/adma.200903711 ↗
15. Light emission from an ambipolar semiconducting polymer field-effect transistor10.1063/1.2149986 ↗
16. Quantum efficiency of ambipolar light-emitting polymer field-effect transistors10.1063/1.2894723 ↗
17. Organic light-emitting transistors with an efficiency that outperforms the equivalent light-emitting diodes10.1038/nmat2751 ↗
18. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
19. Novel red-emitting fluorene-based copolymers10.1039/b203862e ↗
20. Synthesis and electroluminescent properties of high-efficiency saturated red emitter based on copolymers from fluorene and 4,7-di(4-hexylthien-2-yl)-2,1,3-benzothiadiazole10.1021/ma049204g ↗
21. High-performance polymer solar cells of an alternating polyfluorene copolymer and a fullerene derivative10.1002/adma.200304150 ↗
22. Low bandgap alternating polyfluorene copolymers in plastic photodiodes and solar cells10.1007/s00339-003-2498-5 ↗
23. Dual electron donor/electron acceptor character of a conjugated polymer in efficient photovoltaic diodes10.1063/1.2738197 ↗
24. Influence of alkyl side-chain length on the performance of poly(3-alkylthiophene)/polyfluorene all-polymer solar Cells10.1021/cm100189t ↗
25. Donor polymers containing benzothiadiazole and four thiophene rings in their repeating units with improved photovoltaic performance10.1021/ma900601y ↗
26. Formation of nanopatterned polymer blends in photovoltaic devices10.1021/nl904098m ↗
27. New well-defined poly(2,7-fluorene) derivatives: photoluminescence and base doping10.1021/ma970920a ↗
28. An improved experimental determination of external photoluminescence quantum efficiency10.1002/adma.19970090308 ↗
29. The electronic states of polyfluorene copolymers with alternating donor-acceptor units10.1063/1.1817873 ↗
30. Conjugated polymer aggregates in solution: control of interchain interactions10.1063/1.478288 ↗
31. Influence of molecular weight on the performance of organic solar cells based on a fluorene derivative10.1002/adfm.201000224 ↗
32. Contact effects in polymer transistors10.1063/1.1512950 ↗
33. Simultaneous optimization of light gain and charge transport in ambipolar light-emitting polymer field-effect transistors10.1021/cm900982a ↗
34. Dependence of regioregular poly(3-hexylthiophene) film morphology and field-effect mobility on molecular weight10.1021/ma047415f ↗
35. Controlling electron and hole charge injection in ambipolar organic field-effect transistors by self-assembled monolayers10.1002/adfm.200900315 ↗
36. Phase separation in polyfluorene-based conjugated polymer blends: lateral and vertical analysis of blend spin-cast thin films10.1021/ma035750i ↗
37. Raman dispersion and intermolecular interactions in unsubstituted thiophene oligomers10.1021/jp066933k ↗
38. Optical spectroscopy of a polyfluorene copolymer at high pressure: intra- and intermolecular interactions10.1103/PhysRevLett.99.167401 ↗
39. Thin-film morphology of conjugated polymers by Raman spectroscopy10.1063/1.3276257 ↗
40. UV–VIS–NIR and Raman spectroelectrochemistry of regioregular poly(3-octylthiophene): comparison with its non-regioregular analogue10.1039/FT9969201387 ↗
41. Influence of film morphology on the vibrational spectra of dioctyl substituted polyfluorene (PFO)10.1016/S0379-6779(99)00320-3 ↗
42. High pressure study of the intramolecular vibrational modes in sexithiophene single crystals10.1016/S0379-6779(00)00430-6 ↗
43. Resonant Raman scattering in polyacetylene under hydrostatic pressure10.1016/0038-1098(85)90393-X ↗
44. High-pressure Raman and infrared spectroscopy of polyacetylene10.1002/jrs.999 ↗
45. Conjugated-polymer-based lateral heterostructures defined by high-resolution photolithography10.1142/7447 ↗
46. Regioregular copolymers of 3-alkoxythiophene and their photovoltaic application10.1021/ja061664x ↗
47. Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends10.1002/adfm.200500339 ↗