Efficiency enhancement of organic solar cells enabled by interface engineering of sol-gel zinc oxide with an oxadiazole-based material
Source abstract
Abstract
Abstract Organic solar cells (OSCs) have acquired much attentions owing to their advantages in terms of solution-processability, low-cost, lightweight and compatibility for large-scale roll-to-roll processing. Aside from materials design, studies on interface engineering are also crucial to enhance photovoltaic performance for the realization of high-performing OSCs. In this study, interface engineering on sol-gel zinc oxide (ZnO) electron-transporting layer (ETL) was conducted by introducing additional oxadiazole-based electron-transporting materials, PBD between ZnO ETL and photoactive layer. The significance of incorporating PBD on ZnO was demonstrated by investigating the change in optical, electrical and morphological properties of pristine ZnO ETL. Herein, the utilization of PBD could enhance ZnO film's conductivity, which was favorable for better charge transport ability. As compared to ZnO ETL, ZnO/PBD ETL had lower work function to facilitate more efficient electron extraction from the photoactive layer. Moreover, PBD could smoothen the ZnO film's morphology and improve hydrophobicity of the surface to provide uniform and intimate interfacial contact between ETL and the photoactive layer. As a result, through this hybrid bilayer strategy, inverted OSCs based on PBDB-T:IT-M photoactive layer system exhibited ~7% enhancement in the power conversion efficiency from 10.8% (ZnO-based device) to 11.6% (optimized ZnO/PBD-based device).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
4. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
5. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor heterojunctions10.1126/science.270.5243.1789 ↗
6. 25th anniversary article: bulk heterojunction solar cells: understanding the mechanism of operation10.1002/adma.201304373 ↗
7. High dielectric constant conjugated materials for organic photovoltaics10.1039/C7TA06808E ↗
8. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
9. Structures and properties of conjugated donor-acceptor copolymers for solar cell applications10.1039/c2jm14951f ↗
10. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
11. Fullerene derivative acceptors for high performance polymer solar cells10.1039/C0CP01178A ↗
12. Polymer–fullerene bulk heterojunction solar cells10.1002/adma.200903697 ↗
13. Photoconductive cathode interlayer for highly efficient inverted polymer solar cells10.1021/jacs.5b02168 ↗
14. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
15. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
16. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
17. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
18. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
19. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
20. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
21. A wide-bandgap donor polymer for highly efficient non-fullerene organic solar cells with a small voltage loss10.1021/jacs.7b01606 ↗
22. Highly efficient non-fullerene organic solar cells using 4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b′]dithiophene-based polymers as additives10.1021/acs.macromol.8b00683 ↗
23. Yuan · 2019
24. Fan · 2019
25. Single‐junction binary‐blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
26. Naphthodithiophene‐based nonfullerene acceptor for high‐performance organic photovoltaics: effect of extended conjugation10.1002/adma.201704713 ↗
27. A universal nonfullerene electron acceptor matching with different band-gap polymer donors for high-performance polymer solar cells10.1039/C7TA11339K ↗
28. Interfacial materials for organic solar cells: recent advances and perspectives10.1002/advs.201500362 ↗
29. Recent advances in solution-processed interfacial materials for efficient and stable polymer solar cells10.1039/c2ee02806a ↗
30. Interfacial layer engineering for performance enhancement in polymer solar cells10.3390/polym7020333 ↗
31. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
32. Improved high-efficiency organic solar cells via incorporation of a conjugated polyelectrolyte interlayer10.1021/ja2037673 ↗
33. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
34. Interface design for high-efficiency non-fullerene polymer solar cells10.1039/C7EE00601B ↗
35. Perylene diimides: a thickness-insensitive cathode interlayer for high performance polymer solar cells10.1039/c4ee00022f ↗
36. High-performance inverted polymer solar cells with zirconium acetylacetonate buffer layers10.1021/acsami.6b11636 ↗
37. Interface engineering for organic electronics10.1002/adfm.200902236 ↗
38. Fullerene derivative-doped zinc oxide nanofilm as the cathode of inverted polymer solar cells with low-bandgap polymer (PTB7-Th) for high performance10.1002/adma.201301476 ↗
39. Interface engineering through electron transport layer modification for high efficiency organic solar cells10.1039/C7RA13428B ↗
40. Fullerene-free organic solar cells with efficiency over 12% based on EDTA–ZnO hybrid cathode interlayer10.1021/acs.chemmater.7b01615 ↗
41. Amine-based polar solvent treatment for highly efficient inverted polymer solar cells10.1002/adma.201302991 ↗
42. Organic electroluminescent device having a hole conductor as an emitting layer10.1063/1.101586 ↗
43. Electron transport materials for organic light-emitting diodes10.1021/cm049473l ↗
44. Selective metal transfer and its application to patterned multicolor organic light-emitting diodes10.1002/adma.201004556 ↗
45. Blue-light-emitting organic electroluminescence via exciplex emission based on a fluorene derivative10.1088/0022-3727/37/12/004 ↗
46. Efficient near-infrared polymer and organic light-emitting diodes based on electrophosphorescence from (tetraphenyltetranaphtho[2,3]porphyrin)platinum(II)10.1021/am800236x ↗
47. Tailoring threshold voltage in indium-zinc-oxide thin-film transistors by inserting a 2-(4-biphenylyl)-5-(4-tert-butylphenyl)-1,3,4-oxadiazole buffer layer10.1002/pssa.201700869 ↗
48. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
49. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
50. Graphene-like porous ZnO/graphene oxide nanosheets for high-performance acetone vapor detection10.3390/molecules24030522 ↗
51. N-codoped TiO2 hybrid shells with enhanced visible light photocatalytic performance10.1039/C7RA00985B ↗
52. Highly efficient non-fullerene polymer solar cells enabled by novel non-conjugated small-molecule cathode interlayers10.1039/C8TA00881G ↗
53. Enhanced photovoltaic performance of amorphous donor–acceptor copolymers based on fluorine‐substituted benzodioxocyclohexene‐annelated thiophene10.1002/aenm.201702506 ↗