Phenothiazine-based small molecules for bulk heterojunction organic solar cells; variation of side-chain polarity and length of conjugated system
Source abstract
Abstract
Abstract Three small molecules denoted SM1, SM2 and SM3, with the phenothiazine donor moiety connected to benzothiadiazole and 3-ethylrhodanine acceptor units through thiophene π-linkers have been synthesized for use in organic solar cells with PC71BM as electron acceptor. SM1 has a 2-ethylhexyl group at the phenothiazine nitrogen, while SM2 and SM3 have a 2-(2-methoxyethoxy)ethyl group at that N. Opto-electronic and dielectric properties, charge carrier mobilities, morphology of active layers, and photovoltaic properties were investigated in detail. The three molecules have wide absorption bands with high molar absorption coefficients and relatively low HOMO levels (−5.21 to −5.27 eV). Compared with the N-alkylated SM1, both SM2 and SM3 exhibit red-shifts of the long-wavelength absorption band in thin films, and show enhanced crystallinity in thin films with smaller stacking distances, higher hole mobility, and higher dielectric constant. After solvent vapour annealing, the power conversion efficiencies (PCEs) were significantly improved for the solar cell devices, from 1.69 to 3.95% for SM1, 2.78–6.62% for SM2 and 3.22–7.16% for SM3. This increase in PCEs was due to the enhancement in Jsc and FF attributed to the formation of nanoscale domains of donor and acceptor resulting in efficient charge separation, balanced charge transport and suppressed charge recombination. These results demonstrate that use of an oxygen-containing side chain, in conjunction with alkyl side chains for solubility during solar cell processing, is an alternative and effective strategy for achieving high-performance small molecule donor materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. Low-bandgap conjugated polymers enabling solution-processable tandem solar cells10.1038/natrevmats.2017.43 ↗
2. Small is powerful: recent progress in solution-processed small molecule solar cells10.1002/aenm.201602242 ↗
3. Recent advances in bulk heterojunction polymer solar cells10.1021/acs.chemrev.5b00098 ↗
4. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
5. Single-junction binary-blend nonfullerene polymer solar cells with 12.1% efficiency10.1002/adma.201700144 ↗
6. Achieving 12.8% efficiency by simultaneously improving open-circuit voltage and short-circuit current density in tandem organic solar cells10.1002/adma.201606340 ↗
7. Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%10.1039/C6EE02851A ↗
8. Energy-level modulation of small-molecule electron acceptors to achieve over 12% efficiency in polymer solar cells10.1002/adma.201602776 ↗
9. Solution-processed organic tandem solar cells with power conversion efficiencies >12%10.1038/nphoton.2016.240 ↗
10. Fine-tuning the energy levels of a nonfullerene small-molecule acceptor to achieve a high short-circuit current and a power conversion efficiency over 12% in organic solar cells
11. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
12. Realizing over 13% efficiency in green-solvent-processed nonfullerene organic solar cells enabled by 1,3,4-thiadiazole-based wide-bandgap copolymers
13. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗
14. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
15. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗
16. Exciton binding energies in organic semiconductors10.1007/s00339-003-2182-9 ↗
17. High dielectric constant conjugated materials for organic photovoltaics10.1039/C7TA06808E ↗
18. Strategy for enhancing the dielectric constant of organic semiconductors without sacrificing charge Carrier mobility and solubility10.1002/adfm.201402244 ↗
19. Thickness dependence of the efficiency of polymer:fullerene bulk heterojunction solar cells10.1063/1.2211189 ↗
20. Pathways to a new efficiency regime for organic solar cells10.1002/aenm.201200103 ↗
21. Comparison of the electrical characteristics of four 2,5-substituted poly(p-phenylene vinylene) derivatives with different side chains10.1016/j.tsf.2005.12.036 ↗
22. Engineering dielectric constants in organic semiconductors10.1039/C7TC00893G ↗
23. Dielectric constant enhancement of non-fullerene acceptors via side-chain modification10.1039/C5CC05853H ↗
24. Replacing alkyl with oligo(ethylene glycol) as side chains of conjugated polymers for close π–π stacking10.1021/acs.macromol.5b00702 ↗
25. Diketopyrrolopyrrole-based conjugated polymers bearing branched oligo(ethylene glycol) side chains for photovoltaic devices10.1002/anie.201602775 ↗
26. A polymer electron donor based on isoindigo units bearing branched oligo(ethylene glycol) side chains for polymer solar cells10.1039/C7PY01089C ↗
27. Density-functional thermochemistry .3. The role of exact exchange10.1063/1.464913 ↗
28. Development of the Colle-Salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
29. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
30. Generalized gradient approximation made simple
31. H-Ne, 6-31G(d) basis set10.1063/1.1677527 ↗
32. Efficient diffuse function-augmented basis sets for anion calculations. III. The 3-21+G basis set for first-row elements, Li–F10.1002/jcc.540040303 ↗
33. Density-functional theory for time-dependent systems10.1103/PhysRevLett.52.997 ↗
34. Frisch · 2016
35. 2009
36. Phenothiazine-based dyes for efficient dye-sensitized solar cells10.1039/C5TC04418A ↗
37. Effect of acceptor strength on optical, electrochemical and photovoltaic properties of phenothiazine-based small molecule for bulk heterojunction organic solar cells10.1016/j.dyepig.2017.11.048 ↗
38. Spectroscopic investigations of vinyl-substituted 10H-phenothiazine10.1016/j.dyepig.2009.05.004 ↗
39. Conjugated polymers based on phenothiazine and fluorene in light-emitting diodes and field effect transistors10.1021/cm035264+ ↗
40. Conductive polymers based on phenothiazine-benzothiadiazole: Synthesis, characterization of photovoltaics10.4028/www.scientific.net/AMR.634-638.2643 ↗
41. Materials design via optimized intramolecular noncovalent interactions for high-performance organic semiconductors10.1021/acs.chemmater.6b00850 ↗
42. Zinc phthalocyanine π-conjugately linked with electron-withdrawing benzothiadiazole towards broad absorption10.1016/j.tetlet.2013.08.048 ↗
43. Molecular design of donor–acceptor conjugated copolymers based on C-, Si- and N-bridged dithiophene and thienopyrroledione derivatives units for organic solar cells10.1016/j.jpowsour.2013.06.137 ↗
44. Theoretical Investigations on Donor–Acceptor Conjugated Copolymers Based on Naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for Organic Solar Cell Applications10.1021/jp306656c ↗
45. Evaluating push–pull dye efficiency using TD-DFT and charge transfer indices10.1039/c3cp53740d ↗
46. The calculations of excited-state properties with time-dependent density functional theory10.1039/C2CS35394F ↗
47. Accurate description of hybridized local and charge-transfer excited-state in donor–acceptor molecules using density functional theory10.1039/C6RA22267F ↗
48. TD-DFT benchmarks: a review
49. A new hybrid exchange-correlation functional using the Coulomb-attenuating method (CAM-B3LYP)10.1016/j.cplett.2004.06.011 ↗
50. Time-dependent density functional theory calculations of the solvatochromism of some azo sulfonamide fluorochromes10.1007/s00894-015-2651-z ↗
51. A facile strategy to enhance the fill factor of ternary blend solar cells by increasing charge Carrier mobility10.1039/c2nj41039g ↗
52. Conjugated polymers with polar side chains in bulk heterojunction solar cell devices10.1002/pi.4600 ↗
53. Solution-processed diketopyrrolopyrrole-containing small-molecule organic solar cells with 7.0% efficiency: in-depth investigation on the effects of structure modification and solvent vapor annealing10.1021/acs.chemmater.5b00848 ↗
54. Efficiency improvement of solution-processed dithienopyrrole-based A-D-A oligothiophene bulk-heterojunction solar cells by solvent vapor annealing10.1002/aenm.201400266 ↗
55. The effect of H- and J-aggregation on the photophysical and photovoltaic properties of small thiophene-pyridine-DPP molecules for bulk-heterojunction solar cells10.1002/adfm.201605779 ↗
56. The relation between open-circuit voltage and the onset of photocurrent generation by charge-transfer absorption in Polymer : Fullerene bulk heterojunction solar cells10.1002/adfm.200800056 ↗
57. Bisalkylthio side chain manipulation on two-dimensional benzo[1,2-b:4,5-b′]dithiophene copolymers with deep HOMO levels for efficient organic photovoltaics10.1016/j.dyepig.2016.08.057 ↗
58. High-performance electron acceptor with thienyl side chains for organic photovoltaics10.1021/jacs.6b02004 ↗
59. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
60. Pathways to a new efficiency regime for organic solar cells10.1002/aenm.201200103 ↗
61. Increased efficiency of low band gap polymer solar cells at elevated temperature and its origins10.1063/1.3643450 ↗
62. Highly efficient 2d-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗