Blade-coated efficient and stable large-area organic solar cells with optimized additive
Source abstract
Abstract
Abstract For the fabrication of large-area devices, achieving both excellent photovoltaic performance and device stability simultaneously is the key to commercialization of organic solar cells (OSCs). Herein, non-fullerene OSCs with various additives (1,8-diiodooctane (DIO), 1,8-octanedithiol (ODT), chloronaphthalene (CN)) were fabricated by blade-coating in ambient environment. It was demonstrated that all these three additives can improve device performance. However, CN based device shows only a slightly increased power conversion efficiency (PCE) of 9.34% as compared to the device without additive (PCE = 9.19%). Although DIO based device presents an increased PCE of 9.87%, the corresponding device stability is poor. Impressively, due to the enhanced crystallization as well as the small and pure domains, the device with ODT additive not only possesses higher photovoltaic performance (PCE of 10.20%), but also exhibits better device stability. In addition, ODT based large-area device (90 mm2) prepared by blade-coating also exhibits a high PCE of 8.59%, showing great potential in fabricating efficient and stable large-area organic solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
2. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
3. Non-fullerene acceptors for organic solar cells10.1038/natrevmats.2018.3 ↗
4. Material insights and challenges for non-fullerene organic solar cells based on small molecular acceptors10.1038/s41560-018-0181-5 ↗
5. Achieving over 16% efficiency for single-junction organic solar cells10.1007/s11426-019-9457-5 ↗
6. Improved charge transport and reduced nonradiative energy loss enable over 16% efficiency in ternary polymer solar cells10.1002/adma.201902302 ↗
7. Single-Junction polymer solar cells with 16.35% efficiency enabled by a platinum(II) complexation strategy10.1002/adma.201901872 ↗
8. 16.67% rigid and 14.06% flexible organic solar cells enabled by ternary heterojunction strategy10.1002/adma.201902210 ↗
9. Organic and solution-processed tandem solar cells with 17.3% efficiency10.1126/science.aat2612 ↗
10. Graphdiyne derivative as multifunctional solid additive in binary organic solar cells with 17.3% efficiency and high reproductivity10.1002/adma.201907604 ↗
11. Over 17% efficiency ternary organic solar cells enabled by two non-fullerene acceptors working in an alloy-like model10.1039/C9EE03710A ↗
12. 17% efficiency organic photovoltaic cell with superior processability10.1093/nsr/nwz200 ↗
13. 18% Efficiency organic solar cells10.1016/j.scib.2020.01.001 ↗
14. Morphology changes upon scaling a high-efficiency, solution-processed solar cell10.1039/C6EE01623E ↗
15. Roll-to-roll micro-gravure printed large-area zinc oxide thin film as the electron transport layer for solution-processed polymer solar cells10.1016/j.orgel.2017.03.015 ↗
16. Continuous roll-to-roll fabrication of organic photovoltaic cells via interconnected high-vacuum and low-pressure organic vapor phase deposition systems10.1063/1.5039701 ↗
17. A general approach for lab-to-manufacturing translation on flexible organic solar cells10.1002/adma.201903649 ↗
18. Large-area perovskite nanowire arrays fabricated by large-scale roll-to-roll micro-gravure printing and doctor blading10.1039/C5NR08277C ↗
19. Ambient roll-to-roll fabrication of flexible solar cells based on small molecules10.1039/c3tc31708k ↗
20. Roll-coating fabrication of flexible large area small molecule solar cells with power conversion efficiency exceeding 1%10.1039/C4TA04733H ↗
21. Comparison of additive amount used in spin-coated and roll-coated organic solar cells10.1039/C4TA04906C ↗
22. Toward highly efficient large-area ITO-free organic solar cells with a conductance-gradient transparent electrode10.1002/adma.201502827 ↗
23. Achieving balanced crystallinity of donor and acceptor by combining blade-coating and ternary strategies in organic solar cells10.1002/adma.201805041 ↗
24. A blade-coated highly efficient thick active layer for non-fullerene organic solar cells10.1039/C9TA09799F ↗
25. Blade-cast nonfullerene organic solar cells in air with excellent morphology, efficiency, and stability10.1002/adma.201800343 ↗
26. Carrier mobility in mesoscale heterogeneous organic materials: effects of crystallinity and anisotropy on efficient charge transport10.1063/1.4995243 ↗
27. Morphology optimization in ternary organic solar cells10.1007/s10118-017-1898-5 ↗
28. Effect of processing additives on organic photovoltaics: recent progress and future prospects10.1002/aenm.201601496 ↗
29. Stability of organic solar cells: challenges and strategies10.1039/C5CS00593K ↗
30. Removal of residual diiodooctane improves photostability of high-performance organic solar cell polymers10.1021/acs.chemmater.5b04346 ↗
31. Impact of additive residue on the photodegradation of high performance polymer solar cells10.1016/j.orgel.2017.05.021 ↗
32. Non-halogenated solvent-processed single-junction polymer solar cells with 9.91% efficiency and improved photostability10.1016/j.nanoen.2017.09.011 ↗
33. Lithium-ion battery state of health monitoring based on ensemble learning10.1109/ACCESS.2019.2891063 ↗
34. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
35. Design, application, and morphology study of a new photovoltaic polymer with strong aggregation in solution state10.1021/ma301900h ↗
36. Fullerene-free polymer solar cells with over 11% efficiency and excellent thermal stability10.1002/adma.201600281 ↗
37. Charge-carrier mobility requirements for bulk heterojunction solar cells with high fill factor and external quantum efficiency > 90%10.1002/aenm.201500577 ↗
38. An asymmetric small molecule based on thieno 2,3-f benzofuran for efficient organic solar cells10.1016/j.orgel.2016.05.010 ↗
39. A wide-bandgap donor polymer for highly efficient non-fullerene organic solar cells with a small voltage loss10.1021/jacs.7b01606 ↗
40. Surface plasmonic effects of metallic nanoparticles on the performance of polymer bulk heterojunction solar cells10.1021/nn102295p ↗
41. New m-alkoxy-p-fluorophenyl difluoroquinoxaline based polymers in efficient fullerene solar cells with high fill factor10.1016/j.orgel.2017.07.005 ↗
42. Near-infrared non-fullerene acceptors based on dithienyl 1,2-b:4,5-b' benzodithiophene core for high performance PTB7-Th-based polymer solar cells10.1016/j.orgel.2018.10.042 ↗
43. Intensity dependence of current-voltage characteristics and recombination in high-efficiency solution-processed small-molecule solar cells10.1021/nn401267s ↗
44. A SAXS/WAXS/GISAXS beamline with multilayer monochromator
45. Scherrer grain-size analysis adapted to grazing-incidence scattering with area detectors10.1107/S0021889809040126 ↗
46. Soft x-ray scattering facility at the Advanced Light Source with real-time data processing and analysis10.1063/1.3701831 ↗
47. Morphology analysis of organic solar cells with synchrotron radiation based resonant soft X-ray scattering
48. Polarized X-ray scattering reveals non-crystalline orientational ordering in organic films10.1038/nmat3310 ↗