journal article·2018-07

Benefits of fullerene/SnO 2 bilayers as electron transport layer for efficient planar perovskite solar cells

Yun Chen, Cong Xu, Jian Xiong, Zheling Zhang, Xiuyun Zhang, Junliang Yang, Xiaogang Xue, Dong Yang, Jian Zhang

Publisher page

Abstract

Abstract The low temperature-processed electron transport layers are crucial to the commercial perovskite solar cells (PSCs). PC60BM/SnO2 bilayer electron transport layer (ETL) has gradually been reported, but the mechanism of enhancement by the introducing PC60BM on SnO2 is not fully understudied. In this work, low temperature PC60BM/SnO2 bilayer ETLs are successfully prepared via a solution process. The introduction of PC60BM dramatically enhances the performance of the planar PSCs, and the reason has been systemically investigated. The results show that the existence of PC60BM could enhance the crystalline quality and grain boundary integration in perovskite films. The J-V analysis, absorption spectra, photoluminescence spectra and time-resolved photoluminescence spectra show that both the light harvesting of perovskite films and carrier extraction from perovskite films to PC60BM/SnO2 bilayer have been enhanced. Otherwise, perovskite films on ITO/SnO2/PC60BM substrate have a lower trap state density and higher electron mobility than those of ITO/SnO2 substrate or bare ITO substrate. All the results suggest that low temperature-processed PC60BM/SnO2 ETLs will benefit the performance of PSCs and promote the commercial application of planar PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
3. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
4. Electron-hole diffusion lengths > 175 mm in solution-grown CH3NH3PbI3 single crystals10.1126/science.aaa5760 ↗
5. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
6. Recent advances in the inverted planar structure of perovskite solar cells10.1021/acs.accounts.5b00404 ↗
7. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
8. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
9. Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance10.1126/science.aah5557 ↗
10. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
11. The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells10.1039/C6EE03586H ↗
12. Efficient and non-hysteresis CH3NH3PbI3/PCBM planar heterojunction solar cells10.1016/j.orgel.2015.05.028 ↗
13. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
14. Fill factor in organic solar cells10.1039/c3cp51383a ↗
15. Modified two-step deposition method for high-efficiency TiO2/CH3NH3PbI3 heterojunction solar cells10.1021/am502131t ↗
16. Femtosecond time-resolved transient absorption spectroscopy of CH3NH3PbI3 perovskite films: evidence for passivation effect of PbI210.1021/ja504632z ↗
17. Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques10.1038/nphoton.2013.342 ↗
18. Low-temperature SnO2-based electron selective contact for efficient and stable perovskite solar cells10.1039/C5TA01207D ↗
19. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells10.1038/nenergy.2016.177 ↗
20. Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells10.1021/jacs.5b01994 ↗
21. Effects of annealing temperature of tin oxide electron selective layers on the performance of perovskite solar cells10.1039/C5TA06574G ↗
22. Mesoporous SnO2 single crystals as an effective electron collector for perovskite solar cells10.1039/C5CP01534K ↗
23. Highly efficient planar perovskite solar cells through band alignment engineering10.1039/C5EE02608C ↗
24. Electron mobility and injection dynamics in mesoporous ZnO, SnO2, and TiO2 films used in dye-sensitized solar cells10.1021/nn201243y ↗
25. Low-temperature processed SnO2 compact layer for efficient mesostructure perovskite solar cells10.1016/j.apsusc.2016.06.187 ↗
26. Pushing efficiency limits for semitransparent perovskite solar cells10.1039/C5TA08450D ↗
27. Solution-processed Nb:SnO2 electron transport layer for efficient planar perovskite solar cells10.1021/acsami.6b13362 ↗
28. Understanding and eliminating hysteresis for highly efficient planar perovskite solar cells
29. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
30. Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
31. 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗
32. Low-temperature plasma-enhanced atomic layer deposition of tin oxide electron selective layers for highly efficient planar perovskite solar cells10.1039/C6TA04503K ↗
33. Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells10.1038/nenergy.2015.1 ↗
34. Large fill-factor bilayer iodine perovskite solar cells fabricated by a low-temperature solution-process10.1039/C4EE00233D ↗
35. Highly efficient planar perovskite solar cells via interfacial modification with fullerene derivatives10.1002/smll.201503361 ↗
36. Surface state density determines the energy level alignment at hybrid perovskite/electron acceptors interfaces10.1021/acsami.7b12586 ↗
37. Cooperative tin oxide fullerene electron selective layers for high-performance planar perovskite solar cells10.1039/C6TA05095F ↗
38. Low-temperature solution-processed tin oxide as an alternative electron transporting layer for efficient perovskite solar cells10.1021/jacs.5b01994 ↗
39. 17.6% stabilized efficiency in low-temperature processed planar perovskite solar cells10.1039/C5EE01720C ↗
40. Highly sensitive low-bandgap perovskite photodetectors with response from ultraviolet to the near-infrared region10.1002/adfm.201703953 ↗
41. High-performance perovskite-polymer hybrid solar cells via electronic coupling with fullerene monolayers10.1021/nl401044q ↗
42. High performance planar heterojunction perovskite solar cells with fullerene derivatives as the electron transport layer10.1021/am506869k ↗
43. Hysteresis-less inverted CH3NH3PbI3 planar perovskite hybrid solar cells with 18.1% power conversion efficiency10.1039/C5EE00120J ↗
44. Atomistic origins of high-performance in hybrid halide perovskite solar cells10.1021/nl500390f ↗
45. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
46. A sintering-free, nanocrystalline tin oxide electron selective layer for organometal perovskite solar cells10.1007/s40843-016-5159-x ↗
47. Controllable self-Induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
48. Unraveling the reasons for efficiency loss in perovskite solar cells10.1002/adfm.201501024 ↗
49. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
50. Electron-transport-layer-assisted crystallization of perovskite films for high-efficiency planar heterojunction solar cells
51. Grain boundary dominated ion migration in polycrystalline organic–inorganic halide perovskite films10.1039/C6EE00413J ↗