Modeling thin film formation by Ultrasonic Spray method: A case of PEDOT:PSS thin films
Source abstract
Abstract
Recent improvements in electronic and optoelectronic devices based on solution processable polymers have motivated development of scalable processing techniques like Ultrasonic Spray technique. Including potential for roll to roll fabrication, it has many other strengths. However, with spray coating it can be difficult to prepare films with a smooth surface. Here, we present model for Ultrasonic Spray deposition of thin films, which establish a clear correlation between process parameters and the film formation process, which ultimately decide the structural features of the thin films. Based on the time to cover the spray deposition area by the sprayed droplets and the time for droplet evaporation, a balance parameter has been defined. It provides a mean to determine suitable process parameters for uniform film formation by Ultrasonic Spray method. The model is further modified for the region of higher solution flow rates, where non-uniformity in droplet distribution is introduced. The predictions based on the model have been experimentally verified with thin films of poly(3,4-ethylene dioxythiophene) doped with polystyrene sulphonic acid (PEDOT:PSS). The method presented here can be used to predict proper deposition parameters for smooth film deposition by Ultrasonic Spray technique. Finally, the effect of film morphology on the sheet resistance of thin films of PEDOT:PSS is also presented.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Sensor and Energy Harvesting Materials · Organic Electronics and Photovoltaics · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. Fabrication of organic bulk heterojunction solar cells by a spray deposition method for low-cost power generation10.1063/1.2772766 ↗
2. Topographical and morphological aspects of spray coated organic photovoltaics10.1016/j.orgel.2009.02.010 ↗
3. Spray deposition of organic semiconducting thin-films: towards the fabrication of arbitrary shaped organic electronic devices10.1016/j.orgel.2010.02.018 ↗
4. Ultrasonic spray deposition for production of organic solar cells
5. Inspection of substrate-heated modified PEDOT:PSS morphology for all spray deposited organic photovoltaics10.1016/j.solmat.2010.03.013 ↗
6. Spray-deposited poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) top electrode for organic solar cells10.1063/1.3021022 ↗
7. Ultrasonically sprayed and inkjet printed thin film electrodes for organic solar cells10.1016/j.tsf.2008.10.124 ↗
8. Insights into the physics of spray coating of SWNT films10.1016/j.ces.2009.11.042 ↗
9. Fully spray coated organic photodiodes10.1021/nl803386y ↗
10. Novel method for polymer thin film preparation: spray deposition of highly diluted polymer solution10.1143/JJAP.41.L70 ↗
11. Spary method for organic electroluminescent device fabrication10.1143/JJAP.41.6219 ↗
12. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
13. H. Kempa, U. Fügmann, U. Hahn, G. Schmidt, B. Meier, M. Bartzsch, T. Fischer, M. Stanel, K. Reuter, K. Preißler, A. Huebler, On the applicability of different mass printing methods for the deposition of organic functional materials, Proceedings of OEC-06.
14. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
15. Exploring spray coating as a deposition technique for the fabrication of solution-processed solar cells10.1016/j.solmat.2008.11.052 ↗
16. Brochure: ‘Ultrasonic Spray Nozzle Systems’, published by Sonotek Corporation, 6.
17. Effects of layer thickness and annealing of PEDOT:PSS layers in organic photodetectors10.1021/ma901182u ↗
18. Correlation of morphology and charge transport in poly(3,4-ethylenedioxythiophene)–polystyrenesulfonic acid (PEDOT–PSS) films10.1088/0953-8984/21/7/072101 ↗
19. Picosecond laser direct patterning of poly(3,4-ethylene dioxythiophene)–poly(styrene sulfonate) (PEDOT:PSS) thin films10.2961/jlmn.2011.03.0015 ↗
20. Processing and electrical characterization in intrinsic conducting polymers for electronic and MEMS applications10.1117/12.484280 ↗
21. Fully spray-coated ITO-free organic solar cells for low-cost power generation10.1016/j.solmat.2010.01.003 ↗