High-performing submicron organic thin-film transistors fabricated by residue-free embossing
Source abstract
Abstract
In this study, we report on an innovative residue-free nanoimprint lithography process for the patterning of submicron-spaced contacts, used as source and drain electrodes in downscaled organic thin-film transistors. The method is based on thermally initiated radical polymerization of a novel imprint resist whose outstanding chemical and physical properties are responsible for the excellent results in processability and structure transfer. In combination with a pretreated stamp the thermally curable resist enables residue-free imprinting, thus making etching obsolete. In addition, this process implies only moderate temperature budgets and it is eco-friendly due to a water-based lift-off. To validate the process, source and drain patterned submicron organic thin-film transistors with pentacene as the semiconductor were fabricated, which show excellent transistor behavior parameterized by a low switch-on voltage of Vso = 3 V, an on–off ratio of more than 10 5
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanofabrication and Lithography Techniques · Force Microscopy Techniques and Applications · Advancements in Photolithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. 2006
2. High-speed roll-to-roll nanoimprint lithography on flexible plastic substrates10.1002/adma.200702650 ↗
3. Large area roll-to-roll and roll-to-plate nanoimprint lithography: a step toward high-throughput application of continuous nanoimprinting10.1021/nn9003633 ↗
4. W.B. Jackson, Active-matrix backplanes produced by roll-to-roll self-aligned imprint lithography (SAIL), in: SID International Symposium Digest of Technical Papers 2008, vol. 39, p. 322.10.1889/1.3069658 ↗
5. 30nm channel length pentacene transistors10.1002/adma.200305158 ↗
6. Low-voltage, 30nm channel length, organic transistors with a self-assembled monolayer as gate insulating film10.1063/1.126219 ↗
7. Optimized sub-micron organic thin-film transistors: the influence of contacts and oxide thickness10.1016/j.synthmet.2004.08.012 ↗
8. Pentacene field-effect transistors with sub-10nm channel lengths10.1063/1.1790033 ↗
9. Pentacene field-effect transistors with 10-nm channel lengths10.1109/TED.2005.851845 ↗
10. A hybrid mask-mould lithography scheme and its application in nanoscale organic thin film10.1088/0957-4484/17/4/015 ↗
11. Fabrication of 70nm channel length polymer organic thin-film transistors using nanoimprint lithography10.1063/1.1526457 ↗
12. Orders-of-magnitude reduction of the contact resistance in short-cannel hot embossed organic thin film transistors by oxidative treatment of Au electrodes10.1002/adfm.200700294 ↗
13. Nanoimprinted organic field-effect transistors: fabrication, transfer mechanism and solvent effects on device characteristics10.1016/S0167-9317(04)00225-4 ↗
14. Submicron pentacene-based organic thin-film transistors on flexible substrates10.1063/1.2763973 ↗
15. Nanoscale organic transistors that use source/drain electrodes supported by high-resolution rubber stamps10.1063/1.1541941 ↗
16. Giannuzzi · 2004
17. Charge trapping at the dielectric of organic transistors visualized in real time and space10.1002/adma.200702688 ↗
18. Modelling electrical characteristics of thin-film field-effect transistors II: effects of traps and impurities10.1016/j.synthmet.2006.09.008 ↗
19. Low-voltage organic thin film transistors with high-k nanocomposite gate dielectrics for flexible electronics and optothermal sensors10.1002/adma.200700831 ↗
20. Influence of grain sizes on the mobility of organic thin-film transistors10.1063/1.1954901 ↗
21. Residue-free room temperature UV-nanoimprinting of submicron organic thin film transistors10.1016/j.orgel.2009.08.010 ↗