Efficient combination of Roll-to-Roll compatible techniques towards the large area deposition of a polymer dielectric film and the solution-processing of an organic semiconductor for the field-effect transistors fabrication on plastic substrate
Source abstract
Abstract
Abstract Flexible Organic Field-Effect Transistors (OFETs) constitute nowadays a highly promising field of the organic and printed electronics due to their multiple applications (flexible displays, sensors etc.). However, their cost-effective fabrication by large area Roll-to-Roll compatible printing methods still remains a challenge for their integration to commercial products. In this work, the moderate speed (1 m/min) process of the flexible cross-linked Poly(4-vinyl phenol) (PVP) polymer gate dielectric layer was carried out by integrating a slot-die method that mimics the Roll-to-Roll (R2R) coating conditions, in combination to an airbrush spray method for the solution-processing of the 6,13-bis(triisopropylsilylethynyl)-pentacene (TIPS-PEN) organic semiconductor. Particularly, the PVP dielectric was slot-die-coated over a 90 × 15 cm2 substrate, while subsequently the TIPS-PEN semiconductor was sprayed onto the 15 × 20 mm2 cPVP-patterned plastic substrates. Α surface investigation study on the well-formed slot-die-coated cPVP strips was conducted, revealing desirable dielectric film topography as a result of the good control over the coating process. A detailed analysis of the cPVP thickness evolution along the 90 × 1.3 cm2 patterned stripe, was carried out. The morphological analysis of the sprayed TIPS-PEN layer over the cPVP film revealed well-organized large crystalline domains across the channel area, as a result of the sufficient crystallization time and the excellent cPVP surface morphology. The fabricated bottom gate/top contact flexible OFETs exhibited excellent I-V electrical characteristics with a maximum mobility of 0.21 cm2/V, negligible hysteresis, low threshold voltages (average value of −0.1 V) and on/off current ratios in the range of 103 to >104. These results demonstrate the potentiality of the proposed scalable methods for the large scale fabrication of high performance low-cost OFET devices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials · Organic Light-Emitting Diodes Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Organic transistors in optical displays and microelectronic applications10.1002/adma.200903559 ↗
2. An OTFT-driven rollable OLED display10.1889/JSID19.4.316 ↗
3. Design and realization of a flexible QQVGA AMOLED display with organic TFTs
4. Investigation of protein detection parameters using nanofunctionalized organic field-effect transistors10.1021/nn305903q ↗
5. In situ antibody detection and charge discrimination using aqueous stable pentacene transistor biosensors10.1021/ja107088m ↗
6. Unencapsulated air-stable organic field effect transistor by all solution processes for low power vapor sensing
7. Highly stable organic polymer field-effect transistor sensor for selective detection in the marine environment10.1038/ncomms3954 ↗
8. Inkjet printing of single-crystal films10.1038/nature10313 ↗
9. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains10.1038/nmat3650 ↗
10. Uniform, high performance, solution processed organic thin-film transistors integrated in 1 MHz frequency ring oscillators
11. Self-assembly of organic channel/polymer dielectric layer in solution process for low-voltage thin-film transistors
12. Solution-processed single-crystalline organic transistors on patterned ultrathin gate insulators
13. Recent progress on high-capacitance polymer gate dielectrics for flexible low-voltage transistors10.1002/adfm.201802201 ↗
14. High- k gate dielectrics for emerging flexible and stretchable electronics10.1021/acs.chemrev.8b00045 ↗
15. High-k polymeric gate insulators for organic field-effect transistors10.1088/1361-6528/ab00a4 ↗
16. All ink-jet printed low-voltage organic field-effect transistors on flexible substrate
17. Fully solution-processed organic thin-film transistors by consecutive roll-to-roll gravure printing
18. Organic transistors based on airbrushed small molecule-insulating polymer blends with mobilities exceeding 1 Cm2 V-1 s-110.1039/C6RA22342G ↗
19. High mobility field-effect transistors with versatile processing from a small-molecule organic semiconductor10.1002/adma.201205371 ↗
20. Low-voltage polymer/small-molecule blend organic thin-film transistors and circuits fabricated via spray deposition10.1063/1.4922194 ↗
21. All-printed flexible organic transistors enabled by surface tension-guided blade coating10.1002/adma.201401520 ↗
22. Tuning charge transport in solution-sheared organic semiconductors using lattice strain10.1038/nature10683 ↗
23. High performance transistors based on the controlled growth of triisopropylsilylethynyl-pentacene crystals via non-isotropic solvent evaporation10.1039/C4RA02300E ↗
24. Controlled growth of large-area high-performance small-molecule organic single-crystalline transistors by slot-die coating using a mixed solvent system10.1002/adma.201301267 ↗
25. Organic thin-film transistors fabricated using a slot-die-coating process and related sensing applications10.1039/C6RA18545B ↗
26. Solution-processed high performance organic thin film transistors enabled by roll-to-roll slot die coating technique10.1007/s00339-017-1377-4 ↗
27. Large area slot-die coated organic solar cells on flexible substrates with non-halogenated solution formulations10.1016/j.solmat.2014.06.017 ↗
28. Organic semiconducting layers fabricated by self-metered slot-die coating for solution-processable organic light-emitting devices10.1039/C4TC00817K ↗
29. Fabrication and processing of polymer solar cells: a review of printing and coating techniques
30. Substrates for flexible electronics: a practical investigation on the electrical, film flexibility, optical, temperature, and solvent resistance properties10.1002/polb.22227 ↗
31. Effect of the high vacuum seasoning process on poly (4-vinyl phenol) as organic gate dielectric in all solution-processed organic thin-film transistors
32. An inkjet-printed, ultralow voltage, flexible organic field effect transistor10.1002/admt.201600212 ↗
33. Thiol-ene cross-linked polymer gate dielectrics for low-voltage organic thin-film transistors10.1021/cm403203k ↗
34. Dependence of pentacene crystal growth on dielectric roughness for fabrication of flexible field-effect transistors10.1021/am900652h ↗
35. Effects of gate dielectric composition on the performance of organic thin-film devices10.1016/j.synthmet.2012.01.020 ↗
36. High performance airbrushed organic thin film transistors
37. Electrospray-processed soluble acenes toward the realization of high-performance field-effect transistors10.1021/am508162m ↗
38. High mobility transistors based on electrospray-printed small-molecule/polymer semiconducting blends10.1039/C6TC00238B ↗
39. High-performance organic field-effect transistors with dielectric and active layers printed sequentially by ultrasonic spraying10.1039/c3tc30535j ↗
40. Functionalized pentacene: improved electronic properties from control of solid-state order [20]10.1021/ja0162459 ↗
41. Electron traps and hysteresis in pentacene-based organic thin-film transistors10.1063/1.2146059 ↗
42. Effect of the hydrophobicity and thickness of polymer gate dielectrics on the hysteresis behavior of pentacene-based field-effect transistors
43. Effects of hydroxyl groups in polymeric dielectrics on organic transistor performance
44. Flexible spray-coated TIPS-pentacene organic thin-film transistors as ammonia gas sensors