journal article·2024-02

Fabrication of 1D/3D heterostructure perovskite layers by tetrabutylammonium tetrafluoroborate for high-performance devices

Seid Yimer Abate, Surabhi Jha, Abdul Kalam Shaik, Guorong Ma, Jada Emodogo, Nihar Pradhan, Xiaodan Gu, Derek Patton, Nathan I. Hammer, Qilin Dai

Organic Electronics· Volume 125
Publisher page

Abstract

Organic-inorganic halide perovskites achieved tremendous success in solar cells, however, their commercialization has not yet been realized. The primary reason is the intrinsic property of perovskite film. The significant density of defects in the polycrystalline perovskite layers influenced not only the performance of the solar cell as well its long-term stability. Here, we employed a post-surface treatment of the perovskite layer by tetrabutylammonium tetrafluoroborate (TBATFB). TBATFB interacted through hydrogen bonding with the 3D perovskite and formed an in situ a 1D TBAPbI 1.66Br 0.34BF 4 on the surface of the 3D perovskite. This low-dimensional 1D perovskite (perovskitoid) capping layer represses the defects in perovskite by blocking the nonradiative recombination centers and minimizing the surface and grain boundary defects. Our experimental results verified both the electron and hole defects were significantly suppressed by the TBATFB modification. As a result, the 1D/3D heterostructure device exhibited a champion performance of 21.68% PCE compared to 20.03% PCE for the control device. Intriguingly, the 1D TBAPbI 1.66Br 0.34BF 4 capping layer safeguards the 3D perovskite from the infiltration of moisture thus the TBATFB modified devices maintained 99% of their initial performance after 720h in the air (RH = 40–60%).
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Solid-state spectroscopy and crystallography · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Controlled growth of perovskite layers with volatile alkylammonium chlorides10.1038/s41586-023-05825-y ↗
2. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
3. How strong is the hydrogen bond in hybrid perovskites?10.1021/acs.jpclett.7b03106 ↗
4. Defect passivation of perovskite films for highly efficient and stable solar cells10.1002/solr.202100295 ↗
5. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
6. Enhanced thermal stability in perovskite solar cells by assembling 2D/3D stacking structures10.1021/acs.jpclett.7b02679 ↗
7. Efficient, stable and scalable perovskite solar cells using poly(3-hexylthiophene)10.1038/s41586-019-1036-3 ↗
8. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
9. Universal approach toward hysteresis-free perovskite solar cell via defect engineering10.1021/jacs.7b10430 ↗
10. Improving the stability and decreasing the trap state density of mixed-cation perovskite solar cells through compositional engineering10.1039/C8SE00127H ↗
11. Defect passivation of organic–inorganic hybrid perovskites by diammonium iodide toward high-performance photovoltaic devices10.1021/acsenergylett.6b00327 ↗
12. Enhancement of morphological and optoelectronic properties of perovskite films by CH3NH3Cl treatment for efficient solar minimodules10.1021/acsaem.7b00194 ↗
13. Chlorine vacancy passivation in mixed halide perovskite quantum dots by organic pseudohalides enables efficient Rec. 2020 blue light-emitting diodes10.1021/acsenergylett.0c00057 ↗
14. Passivation of defects in perovskite solar cell: from a chemistry point of view10.1016/j.nanoen.2020.105237 ↗
15. Defect passivation and interface modification by tetra-n-octadecyl ammonium bromide for efficient and stable inverted perovskite solar cells10.1016/j.cej.2021.132426 ↗
16. Self-formed grain boundary healing layer for highly efficient CH3NH3PbI3 perovskite solar cells10.1038/nenergy.2016.81 ↗
17. Tetrabutylammonium cations for moisture-resistant and semitransparent perovskite solar cells10.1039/C7TA06735F ↗
18. Ultrahydrophobic 3D/2D fluoroarene bilayer-based water-resistant perovskite solar cells with efficiencies exceeding 22
19. Enhancing defect tolerance and phase stability of high-bandgap perovskites via guanidinium alloying10.1021/acsenergylett.8b00576 ↗
20. Guanidinium: a route to enhanced carrier lifetime and open-circuit voltage in hybrid perovskite solar cells10.1021/acs.nanolett.5b04060 ↗
21. Interfacial modification of perovskite solar cells using an ultrathin MAI layer leads to enhanced energy level alignment, efficiencies, and reproducibility10.1021/acs.jpclett.7b01508 ↗
22. Formation of stable mixed guanidinium-methylammonium phases with exceptionally long carrier lifetimes for high-efficiency lead iodide-based perovskite photovoltaics10.1021/jacs.7b12860 ↗
23. Atomic-level passivation mechanism of ammonium salts enabling highly efficient perovskite solar cells10.1038/s41467-019-10985-5 ↗
24. Direct surface passivation of perovskite film by 4-fluorophenethylammonium iodide toward stable and efficient perovskite solar cells10.1021/acsami.0c17773 ↗
25. Unveiling the guest effect of N-butylammonium iodide towards efficient and stable 2D-3D perovskite solar cells through sequential deposition process10.1016/j.cej.2019.123589 ↗
26. Interfacial passivation engineering of perovskite solar cells with fill factor over 82% and outstanding operational stability on n-i-p architecture10.1021/acsenergylett.1c01811 ↗
27. Outstanding passivation effect by a mixed-salt interlayer with internal interactions in perovskite solar cells10.1021/acsenergylett.0c01664 ↗
28. Interfacial passivation for perovskite solar cells: the effects of the functional group in phenethylammonium iodide10.1021/acsenergylett.9b02375 ↗
29. Impact of n-butylammonium bromide on the chemical and electronic structure of double-cation perovskite thin films10.1021/acsami.1c15707 ↗
30. Defect passivation via the incorporation of tetrapropylammonium cation leading to stability enhancement in lead halide perovskite10.1002/adfm.201909737 ↗
31. Passivation and process engineering approaches of halide perovskite films for high efficiency and stability perovskite solar cells10.1039/D1EE00062D ↗
32. Multifunctional passivation strategy based on tetraoctylammonium bromide for efficient inverted perovskite solar cells10.1016/j.nanoen.2021.105882 ↗
33. Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations10.1038/nenergy.2017.102 ↗
34. In situ fabrication of highly luminescent bifunctional amino acid crosslinked 2D/3D NH3C4H9COO(CH3NH3PbBr3)n perovskite films
35. A breakthrough efficiency of 19.9% obtained in inverted perovskite solar cells by using an efficient trap state passivator Cu(thiourea)I10.1021/jacs.7b01439 ↗
36. Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid omega-ammonium chlorides10.1038/nchem.2324 ↗
37. Thermally stable, planar hybrid perovskite solar cells with high efficiency10.1039/C8EE02242A ↗
38. Tailoring passivation molecular structures for extremely small open-circuit voltage loss in perovskite solar cells10.1021/jacs.8b13091 ↗
39. Synergistic effects of multiple functional ionic liquid-treated PEDOT:PSS and less-ion-defects S-acetylthiocholine chloride-passivated perovskite surface enabling stable and hysteresis-free inverted perovskite solar cells with conversion efficiency over 2010.1016/j.nanoen.2019.103866 ↗
40. Improving perovskite solar cells photovoltaic performance using tetrabutylammonium salt as additive10.1016/j.jpowsour.2019.227623 ↗
41. Post-treatment by an ionic tetrabutylammonium hexafluorophosphate for improved efficiency and stability of perovskite solar cells10.1016/j.jechem.2021.04.058 ↗
42. Fabrication of stable and efficient 2D/3D perovskite solar cells through post-treatment with TBABF410.1039/D0TC05010E ↗
43. Passivation of iodine vacancies of perovskite films by reducing iodine to triiodide anions for high-performance photovoltaics10.1016/j.cej.2022.135647 ↗
44. Stable one dimensional (1D)/three dimensional (3D) perovskite solar cell with an efficiency exceeding 2310.1002/inf2.12303 ↗
45. Low-dimensional emissive states in non-stoichiometric methylammonium lead halide perovskites10.1039/C8TA12184B ↗
46. Gradient 1D/3D perovskite bilayer using 4‐tert‐Butylpyridinium cation for efficient and stable perovskite solar cells10.1002/solr.202000791 ↗
47. Perovskitoid‐templated formation of a 1D@3D perovskite structure toward highly efficient and stable perovskite solar cells10.1002/aenm.202101018 ↗
48. Efficient MA-free perovskite solar cells with balanced carrier transport achieved by 4-trifluorophenylammonium iodide10.1039/D2TA00026A ↗
49. Hydrazinium cation mixed FAPbI3-based perovskite with 1D/3D hybrid dimension structure for efficient and stable solar cells10.1016/j.cej.2020.125724 ↗
50. Highly efficient 1D/3D ferroelectric perovskite solar cell
51. Organic tetrabutylammonium cation intercalation to heal inorganic CsPbI3 perovskite10.1002/anie.202102538 ↗
52. In situ perovskitoid engineering at SnO2 interface toward highly efficient and stable formamidinium lead triiodide perovskite solar cells10.1021/acs.jpclett.1c03002 ↗
53. Improving the performance of perovskite solar cells via a Novel additive of N,1‐Fluoroformamidinium iodide with electron‐withdrawing fluorine group
54. Fluoroethylamine engineering for effective passivation to attain 23.4% efficiency perovskite solar cells with superior stability10.1002/aenm.202101454 ↗
55. Synergistic stabilization of CsPbI3 inorganic perovskite via 1D capping and secondary growth10.1016/j.jechem.2021.12.019 ↗
56. Universal surface passivation of organic-inorganic halide perovskite films by tetraoctylammonium chloride for high-performance and stable perovskite solar cells10.1021/acsami.2c09201 ↗
57. Surface capping layer prepared from the bulky tetradodecylammonium bromide as an efficient perovskite passivation layer for high-performance perovskite solar cells10.1021/acsami.2c19201 ↗
58. Room temperature slot-die coated perovskite layer modified with sulfonyl-γ-AApeptide for high performance perovskite solar devices10.1016/j.cej.2022.141199 ↗
59. Multifunctional 2D perovskite capping layer using cyclohexylmethylammonium bromide for highly efficient and stable perovskite solar cells
60. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
61. A special additive enables all cations and anions passivation for stable perovskite solar cells with efficiency over 2310.1007/s40820-021-00688-2 ↗
62. Rethinking the A Cation in halide perovskites10.1126/science.abj1186 ↗
63. Improved environmental stability and solar cell efficiency of (MA,FA)PbI3 perovskite using a wide-band-gap 1D thiazolium lead iodide capping layer strategy10.1021/acsenergylett.9b00930 ↗
64. One-dimensional organic lead halide perovskites with efficient bluish white-light emission10.1038/ncomms14051 ↗
65. The intrinsic properties of FA(1−x)MAxPbI3 perovskite single crystals10.1039/C7TA01441D ↗
66. Carrier trapping and recombination: the role of defect physics in enhancing the open circuit voltage of metal halide perovskite solar cells10.1039/C6EE01729K ↗
67. Excitation wavelength and intensity-dependent multiexciton dynamics in CsPbBr3 nanocrystals10.3390/nano11020463 ↗
68. Room-temperature construction of mixed-halide perovskite quantum dots with high photoluminescence quantum yield10.1021/acs.jpcc.7b12607 ↗
69. Cesium lead mixed-halide perovskites for low-energy loss solar cells with efficiency beyond 1710.1021/acs.chemmater.9b02248 ↗
70. Unveiling Ultrafast carrier extraction in highly efficient 2D/3D bilayer perovskite solar cells10.1021/acsphotonics.2c00982 ↗
71. Compact TiO2 films with sandwiched Ag nanoparticles as electron-collecting layer in planar type perovskite solar cells: improvement in efficiency and stability10.1039/C7RA13744C ↗
72. Best practices in perovskite solar cell efficiency measurements. Avoiding the error of making bad cells look good10.1021/acs.jpclett.5b00289 ↗