journal article·2023-09

Enhancing efficiency and stability of perovskite solar cells through two-step deposition method with the addition of cesium halides to PbI2 precursor

Seoungjun Ahn, Wei-Hao Chiu, Hsin-Ming Cheng, Vembu Suryanarayanan, Gao Chen, Yu-Ching Huang, Ming-Chung Wu, Kun-Mu Lee

Organic Electronics· Volume 120
Publisher page

Abstract

Perovskite films with few defects play a key role in preparing high-performance perovskite solar cells (PSCs). Here, cesium halides, such as CsCl, CsBr, and CsI, were introduced as a modulator into 1st PbI 2 precursor for manipulating the crystallization of perovskite films. By introducing CsI dense homogeneous perovskite films with high crystallinity, preferential orientation, and a pure black perovskite phase were prepared. In addition, the carrier lifetime of perovskite films was significantly increased because of the suppressed nonradiative recombination. Correspondingly, the power conversion efficiency (PCE) of small-area devices using CsI regulation was increased from 17.45 to 20.29%. Furthermore, the device showed excellent stability maintaining 75% of its initial PCE after 350 h of continuous irradiation. This study demonstrates that CsI-added is a reliable way to prepare PSCs for practical applications.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. Additive-assisted defect passivation for minimization of open-circuit voltage loss and improved perovskite solar cell performance10.1021/acsaem.1c01205 ↗
2. Organic–inorganic hybrid lead halide perovskites for optoelectronic and electronic applications10.1039/C4CS00458B ↗
3. The impact of hybrid compositional film/structure on organic–inorganic perovskite solar cells10.3390/nano8060356 ↗
4. The synergistic effect of H2O and DMF towards stable and 20% efficiency inverted perovskite solar cells10.1039/C6EE03586H ↗
5. Pseudo-halide anion engineering for α-FAPbI3 perovskite solar cells10.1038/s41586-021-03406-5 ↗
6. Compositional engineering for thermally stable, highly efficient perovskite solar cells exceeding 20% power conversion efficiency with 85 °C/85% 1000 h stability10.1002/adma.201806823 ↗
7. 1000 h operational lifetime perovskite solar cells by ambient melting encapsulation10.1002/aenm.201902472 ↗
8. Review on practical interface engineering of perovskite solar cells: from efficiency to stability10.1002/solr.201900257 ↗
9. A review on reducing grain boundaries and morphological improvement of perovskite solar cells from methodology and material‐based perspectives10.1002/smtd.201900569 ↗
10. A review on perovskite solar cells: evolution of architecture, fabrication techniques, commercialization issues and status10.1016/j.solener.2020.01.080 ↗
11. Porous and intercrossed PbI2–CsI nanorod scaffold for inverted planar FA–Cs mixed-cation perovskite solar cells10.1021/acsami.8b20933 ↗
12. Effects of A site doping on the crystallization of perovskite films10.1039/D0TA08656H ↗
13. Additive effect of bromides and chlorides on the performance of perovskite solar cells fabricated via sequential deposition10.1016/j.jpowsour.2021.230528 ↗
14. Effect of CsCl additive on the morphological and optoelectronic properties of formamidinium lead iodide perovskite10.1002/solr.201900294 ↗
15. The impact of a dynamic two-step solution process on film formation of Cs0.15(ma0.7fa0.3)0.85PbI3 perovskite and solar cell performance10.1002/smll.201804858 ↗
16. Application of cesium on the restriction of precursor crystallization for highly reproducible perovskite solar cells exceeding 20% efficiency10.1021/acsami.8b01054 ↗
17. Synergistic improvements in the performance and stability of inverted planar MAPbI3-based perovskite solar cells incorporating benzylammonium halide salt additives10.1039/D0QM00983K ↗
18. CsI pre-intercalation in the inorganic framework for efficient and stable FA1−x CsxPbI3(Cl) perovskite solar cells10.1002/smll.201700484 ↗
19. The influence of CsBr on crystal orientation and optoelectronic properties of MAPbI3-based solar cells10.1021/acsami.1c22184 ↗
20. Porous PbI2 films for the fabrication of efficient, stable perovskite solar cells via sequential deposition10.1039/C6TA03121H ↗
21. Yi · 2019
22. Solution chemistry engineering toward high-efficiency perovskite solar cells10.1021/jz501983v ↗
23. Charge carrier recombination dynamics in a bi-cationic perovskite solar cell10.1039/C8CP07461E ↗
24. δ-CsPbI3 intermediate phase growth assisted sequential deposition boosts stable and high-efficiency triple cation perovskite solar cells
25. Designs from single junctions, heterojunctions to multijunctions for high-performance perovskite solar cells10.1039/D1CS00841B ↗
26. Quantification of light-enhanced ionic transport in lead iodide perovskite thin films and its solar cell applications, Light
27. Mechanism of PbI2 in situ passivated perovskite films for enhancing the performance of perovskite solar cells10.1021/acsami.9b13648 ↗
28. Planar-structure perovskite solar cells with efficiency beyond 2110.1002/adma.201703852 ↗
29. A study on the material characteristics of low temperature cured SnO2 films for perovskite solar cells under high humidity10.1007/s10854-019-02199-8 ↗
30. Band gap tuning via lattice contraction and octahedral tilting in perovskite materials for photovoltaics10.1021/jacs.7b04981 ↗
31. Impact of cesium/rubidium incorporation on the photophysics of multiple-cation lead halide perovskites10.1002/solr.202000072 ↗
32. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
33. Bifacial stamping for high efficiency perovskite solar cells10.1039/C8EE02730G ↗
34. Research direction toward scalable, stable, and high efficiency perovskite solar cells10.1002/aenm.201903106 ↗
35. Effect of cation replacement on the phase stability of formamidinium lead iodide perovskite10.1063/1.5119202 ↗
36. Achieving high open-circuit voltage on planar perovskite solar cells via chlorine-doped tin oxide electron transport layers10.1021/acsami.9b03873 ↗
37. Urbach energy and open-circuit voltage deficit for mixed anion–cation perovskite solar cells10.1021/acsami.1c19122 ↗
38. Interfacial defects passivation using fullerene-polymer mixing layer for planar-structure perovskite solar cells with negligible hysteresis10.1016/j.solener.2020.06.057 ↗
39. Black phosphorus quantum dots induced high-quality perovskite film for efficient and thermally stable planar perovskite solar cells10.1002/solr.201900132 ↗
40. Technical challenges and perspectives for the commercialization of solution-processable solar cells10.1002/admt.202000960 ↗
41. Self-elimination of intrinsic defects improves the low-temperature performance of perovskite photovoltaics10.1016/j.joule.2020.07.006 ↗
42. Temperature-dependent charge-carrier dynamics in CH3NH3PbI3 perovskite thin films10.1002/adfm.201502340 ↗
43. Unreacted PbI2 as a double-edged sword for enhancing the performance of perovskite solar cells10.1021/jacs.6b06320 ↗
44. Temperature-dependent studies of exciton binding energy and phase-transition suppression in (Cs,FA,MA)Pb(I,Br)3 perovskites10.1063/1.5083792 ↗
45. Progress on perovskite materials and solar cells with mixed cations and halide anions10.1021/acsami.7b06001 ↗
46. Temperature and excitation wavelength-dependent photoluminescence of CH3NH3PbBr3 crystal10.1364/OL.43.004923 ↗
47. Optical properties of CsFAMA-based perovskite film and its application in the inverted solar cells with poly(methyl methacrylate) passivation layer10.1364/OME.463437 ↗
48. Quantum interference in a single anisotropic quantum dot near hyperbolic metamaterials10.1364/OE.24.007719 ↗
49. Temperature-dependent exciton linewidths in semiconductors10.1103/PhysRevB.42.11218 ↗
50. Good vibrations: locking of octahedral tilting in mixed-cation iodide perovskites for solar cells10.1021/acsenergylett.7b00729 ↗
51. Incorporating CsF into the PbI2 film for stable mixed cation-halide perovskite solar cells10.1002/aenm.201901726 ↗