journal article·2022-09

Organic thin-film transistors with inkjet-printed electrodes on hydrophobic Teflon-AF gate dielectric with reversible surface properties

Paria Naderi, Gerd Grau

Organic Electronics· Volume 108
Publisher page

Abstract

Printed organic thin-film transistors (OTFTs) are promising for flexible, low-cost electronics; however, a major challenge is that successive processing steps of multiple solution-processed layers can interfere with each other. In particular, hydrophobic fluoropolymers are a promising group of materials to fabricate gate dielectrics with low charge trap density and properties such as good thermal stability, chemical inertness, low dielectric constant, and water repellency. However, the main difficulty in incorporating hydrophobic fluoropolymers in printed electronic devices is their low surface energy. Plasma treatment is a common method for surface modification that renders these hydrophobic layers wettable to print subsequent layers. This plasma processing can also affect the interface with the organic semiconductor (OSC) and transistor performance, which is studied here for the first time. The morphological and surface chemical properties of Teflon amorphous fluoropolymer (Teflon-AF) films change after plasma treatment and gradually reverse after post-annealing of subsequent layers as demonstrated here. Here, we fabricate solution-processed OTFTs with Teflon-AF as the gate dielectric. We report OTFTs with inkjet-printed source and drain electrodes with a minimum channel length of 20 μm on Teflon-AF for the first time. We show that the annealing of the inkjet-printed electrodes changes the morphology and the surface chemistry of the Teflon-AF gate dielectric underneath, thus reversing the effect of the plasma. We show that this electrode post-annealing step can improve the transistor performance by improving the interface between the Teflon-AF gate dielectric and the OSC in terms of smoothness and hydrophobicity. The transistor parameters such as mobility, on/off current ratio, and threshold voltage all follow a trend explained here by the properties of the Teflon-AF films. Increasing the post-annealing temperature to just below complete surface reversibility decreases surface roughness and trap-sites created after plasma treatment leading to optimized device performance. We characterize the Teflon-AF surface with contact angle measurement, roughness measurement, Fourier transform infrared spectroscopy (FTIR), and x-ray photoelectron spectroscopy (XPS). This understanding of the reversibility of the Teflon-AF surface helps achieve optimal performance of devices and systems incorporating fluoropolymers.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thin-Film Transistor Technologies · Organic Electronics and Photovoltaics · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. The 2021 flexible and printed electronics roadmap10.1088/2058-8585/abf986 ↗
2. Flexible low-voltage high-frequency organic thin-film transistors10.1126/sciadv.aaz5156 ↗
3. Printed transistors on paper: towards smart consumer product packaging10.1002/adfm.201400129 ↗
4. Dimensional scaling of high-speed printed organic transistors enabling high-frequency operation10.1088/2058-8585/ab739a ↗
5. Charge transport in polymeric transistors10.1016/S1369-7021(07)70018-4 ↗
6. Gate dielectrics for organic field-effect transistors: new opportunities for organic electronics10.1002/adma.200500517 ↗
7. Spatially correlated charge transport in organic thin film transistors10.1103/PhysRevLett.92.116802 ↗
8. Highly air-stable electrical performance of graphene field effect transistors by interface engineering with amorphous fluoropolymer10.1063/1.3578396 ↗
9. Hysteresis free carbon nanotube thin film transistors comprising hydrophobic dielectrics10.1063/1.4937223 ↗
10. The effect of interfacial roughness on the thin film morphology and charge transport of high-performance polythiophenes10.1002/adfm.200701089 ↗
11. Modeling the water related trap state created in pentacene transistors10.1063/1.2396924 ↗
12. Effect of polymer gate dielectrics on charge transport in carbon nanotube network transistors: low-k insulator for favorable active interface10.1021/acsami.6b06882 ↗
13. Ebnesajjad · 2020
14. Fluoropolymers: the right material for the right applications10.1002/chem.201802708 ↗
15. New fluoropolymers having both low water uptake and a low dielectric constant10.1002/macp.201500394 ↗
16. Charge transfer and trapping properties in polymer gate dielectrics for non-volatile organic field-effect transistor memory applications10.1016/j.sse.2009.07.003 ↗
17. Improvement of mechanical durability on organic TFT with printed electrodes prepared from nanoparticle ink10.1016/j.apsusc.2013.12.168 ↗
18. Patterning method for silver nanoparticle electrodes in fully solution-processed organic thin-film transistors using selectively treated hydrophilic and hydrophobic surfaces10.7567/JJAP.52.05DB05 ↗
19. All-printed flexible organic transistors enabled by surface tension-guided blade coating10.1002/adma.201401520 ↗
20. Modification of the PTFE wettability by oxygen plasma treatments: influence of the operating parameters and investigation of the ageing behaviour10.1088/0022-3727/47/32/325202 ↗
21. Surface modification of fluoropolymers by microwave plasmas: FTIR investigations10.1016/S0257-8972(97)00362-9 ↗
22. Plasma modification of PTFE surfaces - Part I: surfaces immediately following plasma treatment10.1002/sia.1065 ↗
23. XPS characterization of PTFE after treatment with RF oxygen and nitrogen plasma10.1002/sia.2691 ↗
24. XPS and contact angle study of N2 and O2 plasma-modified PTFE, PVDF and PVF surfaces10.1002/sia.2255 ↗
25. Patterning and etching of amorphous teflon films10.1007/BF02651379 ↗
26. Organic small molecule field-effect transistors with CytopTM gate dielectric: eliminating gate bias stress effects10.1063/1.2709894 ↗
27. Record high electron mobility of 6.3 cm 2 V −1 s −1 achieved for polymer semiconductors using a new building block10.1002/adma.201305981 ↗
28. Low-voltage operation of organic thin-film transistors based on ultrafine printed silver electrodes10.1016/j.orgel.2017.08.023 ↗
29. Wetting metamorphosis of hydrophobic fluoropolymer coatings submerged in water and ultrasonically vibrated
30. Effect of annealing on hydrophobic stability of plasma deposited fluoropolymer coatings10.1016/j.polymdegradstab.2008.08.012 ↗
31. High-resolution nondestructive patterning of isolated organic semiconductors
32. Directly spin coating a low-viscosity organic semiconductor solution onto hydrophobic surfaces: toward high-performance solution-processable organic transistors
33. Control of the crystalline structure of inkjet-printed semiconductor layers using overlap condition and surface wettability10.1088/0960-1317/25/5/055011 ↗
34. A pyridine-flanked diketopyrrolopyrrole (DPP)-based donor–acceptor polymer showing high mobility in ambipolar and n-channel organic thin film transistors10.1039/C4PY01193G ↗
35. Tuning the charge carrier polarity of organic transistors by varying the electron affinity of the flanked units in diketopyrrolopyrrole-based copolymers
36. Interface-controlled, high-mobility organic transistors10.1002/adma.200600929 ↗
37. Enhanced mobility in organic field-effect transistors due to semiconductor/dielectric interface control and very thin single crystal10.1088/0957-4484/27/27/275202 ↗
38. Direct evaluation of low-field mobility and access resistance in pentacene field-effect transistors10.1063/1.3432716 ↗
39. The role of hybrid dielectric interfaces in improving the performance of multilayer InSe transistors10.1039/D0TC00331J ↗
40. Contact angle measurement on rough surfaces10.1016/j.jcis.2004.02.036 ↗
41. Effect of roughness as determined by atomic force microscopy on the wetting properties of PTFE thin films10.1002/pen.10580 ↗
42. The role of the substrate roughness in contact angle hysteresis and dynamic deviation10.1016/j.ijheatmasstransfer.2019.118985 ↗
43. Solution-processed organic crystals for field-effect transistor arrays with smooth semiconductor/dielectric interface on paper substrates10.1016/j.orgel.2012.01.021 ↗
44. Grain size dependent mobility in polycrystalline organic field-effect transistors10.1016/S0379-6779(00)01351-5 ↗
45. Effect of the degree of the gate-dielectric surface roughness on the performance of bottom-gate organic thin-film transistors10.1002/admi.201902145 ↗
46. J. Wang, Y. Wu, Y. Cao, G. Li, Y. Liao, Influence of surface roughness on contact angle hysteresis and spreading work, Colloid Polym. Sci.(n.d.). http://doi.org/10.1007/s00396-020-04680-x/Published.
47. Beyond the Lotus effect: roughness influences on wetting over a wide surface-energy range10.1021/la800215r ↗
48. Bracco · 2013
49. Deposition of amorphous fluoropolymer thin films by thermolysis of Teflon amorphous fluoropolymer10.1063/1.107163 ↗
50. M. Abdmouleh, I. Jedidi, M. Khitouni, A. Ben Salah, A. Kabadou, LDPE Phase Composition in LDPE/Cu Composites Using Thermal Analysis AND FTIR Spectroscopy, ((n.d.)).
51. Effects of thermal treatment on porous amorphous fluoropolymer film with a low dielectric constant10.1016/S0921-5107(01)00504-9 ↗
52. Deposition and analytical characterization of fluoropolymer thin films modified by palladium nanoparticles10.1016/j.tsf.2003.10.016 ↗
53. Fluorine incorporation in plasma-polymerized octofluorocyclobutane, hexafluoropropylene and trifluoroethylene10.1016/S0032-3861(00)00693-5 ↗
54. Effects of substrate temperature on structure and mechanical properties of sputter deposited fluorocarbon thin films10.1016/j.vacuum.2012.05.029 ↗
55. Gardella · 2016 · 224
56. Surface alteration of graphite, graphite monofluoride and teflon by interaction with Ar+ and Xe+ beams10.1016/0378-5963(78)90027-2 ↗
57. Carbon dioxide gas, CO2(g), by near-ambient pressure XPS
58. Thermal stability of oxygenated functions in activated carbons10.1016/S0165-2370(97)00060-0 ↗
59. Polymer functional group mobility. 2—partition of ion pairs between hydrophobic and hydrophilic phases of plasma oxidized polyethylene10.1002/sia.740030606 ↗
60. Manipulating doping of organic semiconductors by reactive oxygen for field-effect transistors10.1002/pssr.201800297 ↗
61. Operational stability in pentacene thin-film transistors with threshold voltages tuned by oxygen plasma treatment10.7567/JJAP.55.02BB14 ↗