journal article·2023-07

Boosting the photovoltaic performance of doctor-bladed organic solar cells using a low-boiling solvent additive

Xue Bai, Erming Feng, Hengyue Li, Jingbo Guo, Xiaoming Yuan, Huan Liu, Qun Luo, Yingguo Yang, Changqi Ma, Chenyi Yi, Zijian Zheng, Junliang Yang

Organic Electronics· Volume 118
Publisher page

Abstract

Organic solar cells (OSCs) are attracting much attention due to their distinct benefits of low cost, lightweight and mechanical flexibility. Low-cost and high-throughput approaches combined with large-scale and roll-to-roll (R2R) processes for producing efficient OSCs in ambient condition will considerably speed up the potential commercialization of OSCs. Herein, the low-boiling additive 1,4-difluorobenzene (1,4-DFB) is proposed to produce high-quality PM6:Y6:PC 61 BM blend active layer dissolved in low-boiling solvent via the doctor blading process in ambient condition. The additive 1,4-DFB can improve the morphology, π-π stacking and phase separation, decrease the charge recombination and produce the red-shift absorption, leading to the enhanced carrier mobility and more balanced charge transport. Thus, it boosts the performance parameters with obviously enhanced short-circuit current and fill factor, and a power conversion efficiency of 15.34% is achieved. Meanwhile, the OSCs with the 1,4-DFB additive treatment also exhibit much better stability. The results demonstrate that low-boiling additive engineering with 1,4-DFB is a powerful route to improve the performance of OSCs prepared by doctor-blading in ambient condition.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Thin-Film Transistor Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Toward efficient thick active PTB7 photovoltaic layers using diphenyl ether as a solvent additive10.1021/acsami.6b03453 ↗
2. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
3. 54 cm2 large‐area flexible organic solar modules with efficiency above 1310.1002/adma.202103017 ↗
4. Single‐Junction organic photovoltaic cell with 19% efficiency10.1002/adma.202102420 ↗
5. A high‐efficiency organic solar cell enabled by the strong intramolecular electron push–pull effect of the nonfullerene acceptor
6. Organic solar cells: their developments and potentials10.1016/j.rser.2012.12.046 ↗
7. Organic photovoltaics: technology and market10.1016/j.solmat.2004.02.030 ↗
8. Single-junction organic solar cells with over 19% efficiency enabled by a refined double-fibril network morphology10.1038/s41563-022-01244-y ↗
9. Roll-to-roll printed stable and thickness-independent ZnO: PEI composite electron transport layer for inverted organic solar cells10.1016/j.solener.2019.09.037 ↗
10. Large-scale roll-to-roll micro-gravure printed flexible PBDB-T/IT-M bulk heterojunction photodetectors10.1007/s00339-020-03624-0 ↗
11. Fully doctor-bladed efficient organic solar cells processed under ambient condition10.1016/j.orgel.2020.105725 ↗
12. Roll-to-roll micro-gravure printed P3HT: PCBM organic solar cells10.1088/2058-8585/ab59c3 ↗
13. Solvent additives: key morphology-directing agents for solution-processed organic solar cells10.1002/adma.201707114 ↗
14. Graphdiyne derivative as multifunctional solid additive in binary organic solar cells with 17.3% efficiency and high reproductivity
15. Achieving 15.81% and 15.29% efficiency of all-polymer solar cells based on layer-by-layer or bulk heterojunction structure10.1039/D2TA02914F ↗
16. Layered optimization strategy enables over 17.8% efficiency of layer-by-layer organic photovoltaics10.1016/j.cej.2022.136368 ↗
17. Volatile solid additive-assisted sequential deposition enables 18.42% efficiency in organic solar cells10.1002/advs.202105347 ↗
18. Organic photovoltaic modules with new world record efficiencies10.1002/pip.3336 ↗
19. Sequential blade‐coated acceptor and donor enables simultaneous enhancement of efficiency, stability, and mechanical properties for organic solar cells
20. A layer-by-layer architecture for printable organic solar cells overcoming the scaling lag of module efficiency10.1016/j.joule.2019.12.004 ↗
21. A highly crystalline non-fullerene acceptor enabling efficient indoor organic photovoltaics with high EQE and fill factor10.1016/j.joule.2021.03.020 ↗
22. Increasing the nucleation and growth barrier of a non-fullerene acceptor to achieve bicontinuous pathways in semitransparent ternary polymer solar cells10.1039/D1TC00691F ↗
23. Barrierless free charge generation in the high‐performance PM6: Y6 bulk heterojunction non‐fullerene solar cell10.1002/adma.201906763 ↗
24. Highly efficient non-fullerene organic solar cells enabled by a delayed processing method using a non-halogenated solvent10.1039/D0EE02034F ↗
25. Vertical composition distribution and crystallinity regulations enable high-performance polymer solar cells with> 17% efficiency10.1021/acsenergylett.0c01927 ↗
26. Layer-by-layer slot-die coated high-efficiency organic solar cells processed using twin boiling point solvents under ambient condition10.1007/s12274-021-3576-8 ↗
27. Efficient organic solar cells with the active layer fabricated from glovebox to ambient condition10.1063/5.0021509 ↗
28. One‐step blade‐coated highly efficient nonfullerene organic solar cells with a self‐assembled interfacial layer enabled by solvent vapor annealing10.1002/solr.201900179 ↗
29. Additive and high-temperature processing boost the photovoltaic performance of nonfullerene organic solar cells fabricated with blade coating and nonhalogenated solvents10.1021/acsami.0c23035 ↗
30. Improving photovoltaic performance of non‐fullerene polymer solar cells enables by fine‐tuning blend microstructure via binary solvent mixtures10.1002/adfm.202102853 ↗
31. Additive-induced miscibility regulation and hierarchical morphology enable 17.5% binary organic solar cells10.1039/D0EE04012F ↗
32. Enhanced efficiency in nonfullerene organic solar cells by tuning molecular order and domain characteristics10.1016/j.nanoen.2020.105310 ↗
33. Covalently bound clusters of alpha-substituted PDI rival electron acceptors to fullerene for organic solar cells10.1021/jacs.6b03562 ↗
34. Printable and semitransparent nonfullerene organic solar modules over 30 cm2 introducing an energy-level controllable hole transport layer10.1021/acsami.1c01021 ↗
35. Remove the residual additives toward enhanced efficiency with higher reproducibility in polymer solar cells10.1021/jp404395q ↗
36. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
37. Alkyl chain tuning of small molecule acceptors for efficient organic solar cells10.1016/j.joule.2019.09.010 ↗
38. Low boiling point solvent additives enable vacuum drying-free processed 230 nm thick PTB7-Th: PC71BM active layers with more than 10% power conversion efficiency10.1039/C8TA09259A ↗
39. Zinc oxide: conjugated polymer nanocomposite as cathode buffer layer for solution processed inverted organic solar cells10.1016/j.solmat.2015.05.039 ↗
40. Revealing morphology evolution in highly efficient bulk heterojunction and pseudo‐planar heterojunction solar cells by additives treatment10.1002/aenm.202003390 ↗
41. A nonfullerene acceptor with a 1000 nm absorption edge enables ternary organic solar cells with improved optical and morphological properties and efficiencies over 1510.1039/C9EE01030K ↗
42. Miscibility tuning for optimizing phase separation and vertical distribution toward highly efficient organic solar cells10.1002/advs.201900565 ↗
43. Novel oligomer enables green solvent processed 17.5% ternary organic solar cells: synergistic energy loss reduction and morphology fine‐tuning10.1002/adma.202205638 ↗
44. Vertical stratification engineering for organic bulk-heterojunction devices10.1021/acsnano.8b00439 ↗
45. A new end group on nonfullerene acceptors endows efficient organic solar cells with low energy losses
46. Morphology control enables efficient ternary organic solar cells10.1002/adma.201803045 ↗
47. Improved morphology and interfacial contact of PBDB-T: N2200-based all-polymer solar cells by using the solvent additive p-anisaldehyde10.1021/acsaem.9b01624 ↗