Solution-processed and evaporated C60 interlayers for improved charge transport in perovskite photovoltaics
Source abstract
Abstract
Abstract Interlayers can strongly influence the interfaces of perovskite solar cells (PSCs), and significantly increase the cells’ stabilized power conversion efficiencies (PCEs). This study compares for the first time the fabrication of C60 interlayers, deposited either by solution-processing or vacuum-based thermal evaporation, at the interface between a SnO2 electron transport layer (ETL) and the perovskite (MAPbI3-xClx) absorber layer in a n-i-p architecture. We evaluate the influence of the C60 deposition method on the perovskite crystallization dynamics and relate it to the device performance. With an optimized C60 layer, the devices exhibit an improvement in the stabilized PCE along with reduced hysteresis. As a result, we achieve improvement from 12.5% to 17.3% on the stabilized PCE of the PSCs. Furthermore, we investigate the influence of the C60 layer thickness on the transport dynamics through time-resolved photoluminescence and transient absorption measurements. Finally, we demonstrate that the C60 interlayers stabilize the constant power output of the solar cells over time due to the reduction in charge carrier accumulation at the ETL/Perovskite interface. Our results indicate that the ETL/perovskite interface is a governing factor in the reduction of hysteresis and in the extension of the stability in the PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (58)
Show source-provided references
1. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
2. Long-range balanced electron- and hole-transport lengths in organic-inorganic CH3NH3PbI310.1126/science.1243167 ↗
3. High-efficiency solution-processed perovskite solar cells with millimeter-scale grains10.1126/science.aaa0472 ↗
4. Multipass inkjet printed planar methylammonium lead iodide perovskite solar cells10.1039/C6TA07972E ↗
5. Low-temperature control of nanoscale morphology for high performance polymer photovoltaics10.1021/nl802425r ↗
6. Crystallization process of perovskite modified by adding lead acetate in precursor solution for better morphology and higher device efficiency10.1016/j.orgel.2017.01.022 ↗
7. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
8. Enhanced performance and stability of inverted planar perovskite solar cells by incorporating 1,6-diaminohexane dihydrochloride additive10.1016/j.solmat.2018.07.031 ↗
9. Performance improvement of perovskite solar cells through enhanced hole extraction: the role of iodide concentration gradient10.1016/j.solmat.2018.05.025 ↗
10. Efficient planar CsPbBr 3 perovskite solar cells by dual-source vacuum evaporation10.1016/j.solmat.2018.07.009 ↗
11. Anomalous hysteresis in perovskite solar cells10.1021/jz500113x ↗
12. Investigation of dominant hysteresis phenomenon in perovskite solar cell
13. Suppression of hysteresis effects in organohalide perovskite solar cells10.1002/admi.201700007 ↗
14. Hysteresis and transient behavior in current-voltage measurements of hybrid-perovskite absorber solar cells10.1039/C4EE02465F ↗
15. Control of I-V hysteresis in CH3NH3PbI3Perovskite solar cell10.1021/acs.jpclett.5b02273 ↗
16. Compact layer influence on hysteresis effect in organic–inorganic hybrid perovskite solar cells10.1016/j.elecom.2016.04.013 ↗
17. Dynamic interface charge governing the current–voltage hysteresis in perovskite solar cells10.1039/C5CP00416K ↗
18. Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation10.1039/C5EE01265A ↗
19. Understanding the rate-dependent J–V hysteresis, slow time component, and aging in CH 3 NH 3 PbI 3 perovskite solar cells: the role of a compensated electric field10.1039/C4EE03664F ↗
20. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
21. Capacitive dark currents, hysteresis, and electrode polarization in lead halide perovskite solar cells10.1021/acs.jpclett.5b00480 ↗
22. Inductive loop in the impedance response of perovskite solar cells explained by surface polarization model10.1021/acs.jpclett.7b00415 ↗
23. Role of the selective contacts in the performance of lead halide perovskite solar cells10.1021/jz500059v ↗
24. Elucidating the evolution of the current-voltage characteristics of planar organometal halide perovskite solar cells to an S-shape at low temperature10.1016/j.solmat.2016.08.011 ↗
25. Double-edged sword effects of cation rotation and additive passivation on perovskite solar cell performance: an ab initio investigation10.1016/j.solmat.2018.07.011 ↗
26. It takes two to tango-- double-layer selective contacts in perovskite solar cells for improved device performance and reduced hysteresis10.1021/acsami.7b00900 ↗
27. Analysis of the hysteresis behavior of perovskite solar cells with interfacial fullerene self-assembled monolayers10.1021/acs.jpclett.6b02103 ↗
28. Unraveling current hysteresis effects in regular-type C 60 -CH 3 NH 3 PbI 3 heterojunction solar cells10.1039/C7NR07001B ↗
29. C60 as an efficient n-type compact layer in perovskite solar cells10.1021/acs.jpclett.5b00902 ↗
30. Thickness effects of thermally evaporated C60 thin films on regular-type CH3NH3PbI3 based solar cells10.1016/j.solmat.2017.02.003 ↗
31. Unraveling the charge extraction mechanism of perovskite solar cells fabricated with two-step spin coating: interfacial energetics between methylammonium lead iodide and C6010.1021/acs.jpclett.7b02562 ↗
32. Fullerenes and derivatives as electron transport materials in perovskite solar cells10.1007/s11426-016-0115-x ↗
33. New PCBM/carbon based electron transport layer for perovskite solar cells10.1039/C7CP02523H ↗
34. Impact of ultrathin C 60 on perovskite photovoltaic devices
35. A low-temperature, solution processable tin oxide electron-transporting layer prepared by the dual-fuel combustion method for efficient perovskite solar cells10.1002/admi.201600122 ↗
36. Low-temperature plasma-enhanced atomic layer deposition of tin oxide electron selective layers for highly efficient planar perovskite solar cells10.1039/C6TA04503K ↗
37. Thin films of tin oxide nanosheets used as the electron transporting layer for improved performance and ambient stability of perovskite photovoltaics10.1002/solr.201700117 ↗
38. Surface free energy and wettability determination of various fullerene derivative films on amorphous carbon wafer surface free energy and wettability determination of various fullerene derivative films on amorphous carbon wafer10.1143/JJAP.47.5730 ↗
39. Efficient regular perovskite solar cells based on pristine [70]Fullerene as electron-selective contact10.1002/cssc.201600684 ↗
40. Thermal precursor approach to pristine fullerene film as electron selective layer in perovskite solar cells10.1149/2.0161706jss ↗
41. Merck
42. Merck
43. Ultrathin SnO2 layer for efficient carrier collection in dye-sensitized solar cells
44. Temperature variation induced performance decline of perovskite solar cells10.1021/acsami.8b01033 ↗
45. Photoluminescence in analysis of surfaces and interfaces
46. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
47. Applied Surface Science Low-temperature processed SnO 2 compact layer for efficient mesostructure perovskite solar cells10.1016/j.apsusc.2016.06.187 ↗
48. Highly efficient and stable planar perovskite solar cell by solution-processed tin oxide10.1039/C6EE02390H ↗
49. Iodine migration and its effect on hysteresis in perovskite solar cells10.1002/adma.201503832 ↗
50. Spectroscopy of C60 single molecules: the role of screening on energy level alignment10.1088/0953-8984/20/18/184001 ↗
51. Stability of metal halide perovskite solar cells10.1002/aenm.201500963 ↗
52. Review on the application of SnO2 in perovskite solar cells10.1002/adfm.201802757 ↗
53. Schwenzer · 2018 · 1
54. Interface-Dependent ion migration/accumulation controls hysteresis in MAPbI 3 solar cells10.1021/acs.jpcc.6b04233 ↗
55. Free energy and electronic properties of water adsorption on the SnO 2 (110) surface10.1021/la400313a ↗
56. Stuckelberger · 2015
57. Effects of anodic buffer layer in top-illuminated organic solar cell with silver electrodes10.1155/2013/131984 ↗
58. Shaw · 2006 · vol. 6334