Conversion efficiency enhancement of methylammonium lead triiodide perovskite solar cells converted from thermally deposited lead iodide via thin methylammonium iodide interlayer
Source abstract
Abstract
Abstract The thermally deposited thin methylammonium iodide (MAI) interlayer worked as protection layer of poly (3, 4-ethylenedioxythiophene) poly (styrene sulfonate) (PEDOT:PSS) in the thermal deposition of lead iodide (PbI2). And the thin MAI interlayer could be the MAI supplemental layer during converting the thermally deposited PbI2 into perovskite. The performances of perovskite solar cells (SCs) converted from thermally deposited PbI2 were remarkably enhanced by using the thin MAI interlayer on PEDOT:PSS. The short-circuit current density (JSC), fill factor (FF%), and conversion efficiency (η%) of perovskite SCs converted from thermally deposited PbI2 increased with the initial increase in thickness of the thin MAI interlayer and then reduced when the thickness of thin MAI interlayer exceeded 2.2 nm. Perovskite SCs converted from thermally deposited PbI2 with a 2.2 nm-thick thin MAI interlayer obtained the largest JSC, FF%, and η% at 19.44 mA/cm2, 74% and 12.75%, respectively, in our study. And the largest JSC was more than twice larger than that of perovskite SCs converted from thermally deposited PbI2 without thin MAI interlayer. Although the perovskite SCs converted from thermally deposited PbI2 without thin MAI interlayer has η% much less than that of perovskite SCs converted from spin-coated PbI2. The perovskite SCs converted from thermally deposited PbI2 with 2.2 nm-thick thin MAI interlayer had an η% of 12.75%, which was larger than that of perovskite SCs converted from spin-coated PbI2 at 10.57%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
3. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
4. Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
5. Mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells10.1021/ja307789s ↗
6. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%10.1038/srep00591 ↗
7. All-solid-state hybrid solar cells based on a new organometal halide perovskite sensitizer and one-dimensional TiO2 nanowire arrays10.1039/c3nr00218g ↗
8. High efficiency solid-state sensitized solar cell-based on submicrometer rutile TiO2 nanorod and CH3NH3PbI3 perovskite sensitizer10.1021/nl400286w ↗
9. High-performance perovskite-polymer hybrid solar cells via electronic coupling with fullerene monolayers10.1021/nl401044q ↗
10. High performance hybrid solar cells sensitized by organolead halide perovskites10.1039/c3ee40343b ↗
11. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
12. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
13. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells10.1002/adfm.201302090 ↗
14. First-principles modeling of mixed halide organometal perovskites for photovoltaic applications10.1021/jp4048659 ↗
15. Oxygen-induced doping of spiro-MeOTAD in solid-state dye-sensitized solar cells and its impact on device performance10.1021/nl302509q ↗
16. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
17. Efficient organometal trihalide perovskite planar-heterojunction solar cells on flexible polymer substrates10.1038/ncomms3761 ↗
18. The origin of high efficiency in low-temperature solution-processable bilayer organometal halide hybrid solar cells10.1039/C3EE43161D ↗
19. Flexible, low-temperature, solution processed ZnO-based perovskite solid state cells10.1039/c3cc46534a ↗
20. High voltage and efficient bilayer heterojunction solar cells based on an organic-inorganic hybrid perovskite absorber with a low-cost flexible substrate10.1039/C4CP00298A ↗
21. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
22. Perovskite-based hybrid solar cells exceeding 10% efficiency with high reproducibility using a thin film sandwich approach10.1002/adma.201304803 ↗
23. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
24. Planar heterojunction perovskite solar cells via vapor-assisted solution process10.1021/ja411509g ↗
25. Using a two-step deposition technique to prepare perovskite (CH3NH3PbI3) for thin film solar cells based on ZrO2 and TiO2 mesostructures10.1039/c3ra43228a ↗
26. A highly efficient mesoscopic solar cell based on CH3NH3 Pb3-xClx fabricated via sequential solution deposition10.1039/C4CC01962H ↗
27. Perovskite solar cells employing organic charge-transport layers10.1038/nphoton.2013.341 ↗
28. Efficient and uniform planar-type perovskite solar cells by simple sequential vacuum deposition10.1002/adma.201402461 ↗
29. Perspective: understanding of ripening growth model for minimum residual PbI2 and its limitation in the planar perovskite solar cells10.1063/1.4963841 ↗
30. Vapor phase conversion of PbI2 to CH3NH3PbI3: spectroscopic evidence for formation of an intermediate phase10.1039/C5TA08745G ↗
31. Three-step sequential solution deposition of PbI2-free CH3NH3PbI3 perovskite10.1039/C4TA05384B ↗
32. Control of the morphology of PbI2 films for efficient perovskite solar cells by strong Lewis base additives10.1039/C7TC01973D ↗
33. Achieving the high phase purity of CH3NH3PbI3 film by two-step solution processable crystal engineering10.1016/j.jmst.2017.11.003 ↗
34. Solvent vapor annealing of oriented PbI2 films for improved crystallization of perovskite films in the air10.1016/j.solmat.2017.03.028 ↗
35. Improvement of CH3NH3PbI3 formation for efficient and better reproducible mesoscopic perovskite solar cells10.1021/acsami.5b07446 ↗
36. The role of PbI2 in CH3NH3PbI3 perovskite stability, solar cell parameters and device degradation10.1039/C7CP04749E ↗
37. Planar CH3NH3PbI3 perovskite solar cells with constant 17.2% average power conversion efficiency irrespective of the scan rate10.1002/adma.201500048 ↗
38. Investigation into the advantages of pure perovskite film without PbI2 for high performance solar cell10.1038/srep35994 ↗
39. 17.6% stabilized efficiency in low-temperature processed planar perovskite solar cells10.1039/C5EE01720C ↗
40. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
41. Investigating the growth of CH3NH3PbI3 thin films on RF-sputtered NiOx for inverted planar perovskite solar cells: effect of CH3NH3+ halide additives versus CH3NH3+ halide vapor annealing
42. Unraveling the passivation process of PbI2 to enhance the efficiency of planar perovskite solar cells10.1021/acs.jpcc.8b08075 ↗
43. Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells10.1021/nl501838y ↗
44. Adverse effects of excess residual PbI2 on photovoltaic performance, charge separation, and trap-state properties in mesoporous structured perovskite solar cells10.1002/chem.201605668 ↗
45. Unreacted PbI2 as a double-edged sword for enhancing the performance of perovskite solar cells10.1021/jacs.6b06320 ↗
46. Planar-structure perovskite solar cells with efficiency beyond 21%10.1002/adma.201703852 ↗
47. Effect of PbI2 deposition rate on two-step PVD/CVD all-vacuum prepared perovskite10.1016/j.jssc.2016.08.034 ↗
48. Remnant PbI2, an unforeseen necessity in high-efficiency hybrid perovskite-based solar cells?10.1063/1.4895038 ↗
49. Understanding how excess lead iodide precursor improves halide perovskite solar cell performance10.1038/s41467-018-05583-w ↗
50. A smooth CH3NH3PbI3 film via a new approach for forming the PbI2 nanostructure together with strategically high CH3NH3I concentration for high efficient planar-heterojunction solar cells10.1002/aenm.201501354 ↗
51. Is excess PbI2 beneficial for perovskite solar cell performance?10.1002/aenm.201670040 ↗
52. Improved conversion efficiency of perovskite solar cells converted from thermally deposited lead iodide with dimethyl sulfoxide-treated poly(3,4-ethylenedioxythiophene) poly(styrene sulfonate)10.1016/j.orgel.2019.06.020 ↗