journal article·2022-07

Screen printing of silver nanoparticles on the source/drain electrodes of organic thin-film transistors

Kaibin Wu, Jisu Hong, Xue Qi, Heqing Ye, Zhijun Li, Chenhao Cong, Jian Liu, Xi Li, Ka Yeon Ryu, Sang Yong Nam, Xinlin Li, Sooman Lim, Se Hyun Kim

Organic Electronics· Volume 106
Publisher page

Abstract

Herein, we systematically investigate the screen printing of Ag nanoparticle (AgNP) inks for the use of source and drain (S/D) electrodes of organic thin-film transistors (OTFTs), controlling printing process condition such as printing speed annealing temperature, as well as the surface modification for the substrate. The optimization of screen-printed AgNPs showed high electrical conductivity, nice pattern-fidelity and good adhesion to the substrate. Although the printed AgNP pattern indicated the thickness of about 11 μm (measured at the center area of the pattern) which is too high compared with that of semiconductor layer (∼100 nm), the edge side of the pattern showed the trapezoid shape with an angle of 18.2° enabling the feasible charge injection and extraction between electrodes and semiconductor layer. Based on the optimized AgNP S/D electrode, the OTFTs with 2,9-di-decyl-dinaphtho-[2,3-b:2,3-f]-thieno-[3,2-b]thiophene (C 10-DNTT) semiconductor layer were fabricated on Si/SiO 2 and flexible polyethylene terephthalate (PET) substrates with bottom-gate, bottom-contact (BGBC) and top-gate, bottom-contact (TGBC) device structure, respectively. Consequently, BGBC on Si/SiO 2 showed the best device performance, with a μ FET of 0.186 cm 2V −1s −1 and threshold voltage ( V th) of −0.41 V. In addition, TGBC OTFTs on the PET substrate obtained an electrical performance with a μ FET of 0.012 cm 2V −1s −1.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Thin-Film Transistor Technologies · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Tang, X.; Murali, G.; Lee, H.; Park, S.; Lee, S.; Oh, S. M.; Lee, J.; Ko, T. Y.; Koo, C. M.; Jeong, Y. J.; An, T. K.; In, I.; Kim, S. H., Engineering aggregation-resistant MXene nanosheets as highly conductive and stable inks for all-printed electronics. Adv. Funct. Mater. n/a (n/a), 2010897.
2. The effect of 3D printing on the morphological and mechanical properties of polycaprolactone filament and scaffold10.1002/pat.4838 ↗
3. Electrohydrodynamic printing of microscale PEDOT: PSS-PEO features with tunable conductive/thermal properties10.1021/acsami.8b04051 ↗
4. Direct graphene transfer and its application to transfer printing using mechanically controlled, large area graphene/copper freestanding layer10.1002/adfm.201707102 ↗
5. Fabrication of continuous carbon fiber mesh for lightning protection of large-scale wind-turbine blade by electron beam cured printing
6. Strategy for selective printing of gate insulators customized for practical application in organic integrated devices10.1021/acsami.0c18477 ↗
7. Inkjet‐printed and deep‐UV‐annealed YAlOx dielectrics for high‐performance IGZO thin‐film transistors on flexible substrates
8. Scalable fabrication of highly crystalline organic semiconductor thin film by channel‐restricted screen printing toward the low‐cost fabrication of high‐performance transistor arrays10.1002/adma.201807975 ↗
9. Printed single-chip UHF passive radio frequency identification tags with sensing capability10.1016/j.sna.2014.10.023 ↗
10. Printed passive matrix addressed electrochromic displays10.1016/j.orgel.2013.10.008 ↗
11. Inkjet‐printed micrometer‐thick perovskite solar cells with large columnar grains10.1002/aenm.201903184 ↗
12. Roll-to-roll printed stable and thickness-independent ZnO: PEI composite electron transport layer for inverted organic solar cells10.1016/j.solener.2019.09.037 ↗
13. Fully integrated screen-printed sulfide-selective sensor on a 3D-printed potentiometric microfluidic platform10.1016/j.snb.2019.03.132 ↗
14. Screen-printing of a highly conductive graphene ink for flexible printed electronics10.1021/acsami.9b04589 ↗
15. Development of nanoparticle copper screen printing pastes for silicon heterojunction solar cells10.1016/j.solener.2019.07.055 ↗
16. Reliability of gravure offset printing under various printing conditions10.1063/1.3510466 ↗
17. The theoretical fundamentals of the screen printing process
18. The link between Ag-paste rheology and screen-printed solar cell metallization10.1002/admt.202000654 ↗
19. Ultrahigh oxidation resistance and high electrical conductivity in copper-silver10.1038/srep39650 ↗
20. Sustainable production of highly conductive multilayer graphene ink for wireless connectivity and IoT applications10.1038/s41467-018-07632-w ↗
21. Adhesion enhancements and surface-enhanced Raman scattering activity of Ag and Ag@ SiO2 nanoparticle decorated ragweed pollen microparticle sensor10.1021/acsami.6b15664 ↗
22. Formulation and screen printing of water based conductive flake silver pastes onto green ceramic tapes for electronic applications10.1016/j.mseb.2012.05.015 ↗
23. Flexible small-channel thin-film transistors by electrohydrodynamic lithography10.1039/C7NR06075K ↗
24. Screen-offset printing for fine conductive patterns10.1016/j.mee.2014.05.009 ↗
25. Rheological studies of nickel/scandia‐stabilized‐zirconia screen printing inks for solid oxide fuel cell anode fabrication10.1111/j.1551-2916.2011.05014.x ↗
26. Electrohydrodynamic (EHD) jet printing of carbon-black composites for solution-processed organic field-effect transistors10.1016/j.orgel.2019.06.023 ↗
27. How rheological properties affect fine-line screen printing of pastes: a combined rheological and high-speed video imaging study10.1007/s11998-018-0091-2 ↗
28. The rheological behaviors of screen-printing pastes10.1016/j.jmatprotec.2007.06.067 ↗
29. Organic field-effect transistors10.2478/s11772-010-0008-9 ↗
30. Printable elastic conductors with a high conductivity for electronic textile applications10.1038/ncomms8461 ↗
31. Fabrication of micron-SiO2@nano-Ag based conductive line patterns through silk-screen printing10.1039/C4RA08007F ↗
32. Intrinsic charge transport on the surface of organic semiconductors10.1103/PhysRevLett.93.086602 ↗
33. Temperature-resolved local and macroscopic charge carrier transport in thin P3HT layers10.1002/adfm.200902273 ↗
34. Layered distribution of charge carriers in organic thin film transistors10.1103/PhysRevLett.104.246602 ↗
35. Gate insulators in organic field-effect transistors10.1021/cm049598q ↗
36. An ethanolamine-functionalized fullerene as an efficient electron transport layer for high-efficiency inverted polymer solar cells10.1039/C6TA02016J ↗
37. Understanding, optimizing, and utilizing nonideal transistors based on organic or organic hybrid semiconductors
38. Recent efforts in understanding and improving the nonideal behaviors of organic field-effect transistors10.1002/advs.201900375 ↗
39. Low-voltage organic thin-film transistors based on solution-processed hybrid dielectrics: theoretical and experimental studies10.1088/1361-6641/aa8641 ↗
40. A novel design of donor–acceptor polymer semiconductors for printed electronics: application to transistors and gas sensors10.1039/D0TC01341B ↗