journal article·2023-02

Optimization of tail state Urbach energy enables efficient organic solar cells and perovskite/organic tandem solar cells

Shilei Tian, Tingyao Huang, Fei Han, Fuzhi Wang, Zhan'ao Tan, Yiming Bai

Organic Electronics· Volume 113
Publisher page

Abstract

Tail state Urbach energy caused by the molecular disorder and stacking plays a crucial role for obtaining efficient organic solar cells (OSCs). Herein, we proposed a theoretical and experimental method to adjust the Urbach energy ( E U) of organic photoactive materials. Simulation results show that the E U of 32 meV for PM6:Y6-based single junction (SJ) OSCs can enhance J sc and FF significantly, and thus achieving a high photovoltaic conversion efficiency (PCE) of 18.03%. Interestingly, further decreasing E U within a certain range cannot increase device efficiency obviously, and E U cannot be close to 0 meV in consideration of the molecule disorder of organic material. Under the guidance of theoretical design, the ternary component IEICO-4F was introduced to optimize E U Experimental results show that the optimized E U is obtained upon introducing of IEICO-4F, and a championed PCE of 16.61% is achieved when E U is about 25.80 meV for SJ-OSCs. Tandem solar cells (TSCs) reach an experimental PCE of 18.57% when E U is about 27.46 meV, which facilitates current matching between the front and rear sub-cells.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Nanowire Synthesis and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Efficient monolithic perovskite/organic tandem solar cells and their efficiency potential10.1016/j.nanoen.2020.105238 ↗
2. Efficient monolithic perovskite/perovskite tandem solar cells10.1002/aenm.201602121 ↗
3. Hybrid perovskite‐organic flexible tandem solar cell enabling highly efficient electrocatalysis overall water splitting
4. Highly efficient perovskite-perovskite tandem solar cells reaching 80% of the theoretical limit in photovoltage10.1002/adma.201702140 ↗
5. Design, synthesis, and photovoltaic characterization of a small molecular acceptor with an ultra‐narrow band gap10.1002/ange.201610944 ↗
6. Optimizing binding energy and electron-hole pair binding distance for efficient organic solar cells with low voltage loss10.1016/j.solener.2021.10.002 ↗
7. Interfacial engineering and optical coupling for multicolored semitransparent inverted organic photovoltaics with a record efficiency of over 1210.1039/C9TA05789G ↗
8. Boosting photocurrent of GaInP top-cell for current-matched III–V monolithic multiple-junction solar cells via plasmonic decahedral-shaped Au nanoparticles10.1016/j.solener.2018.03.024 ↗
9. High efficiency (16.37%) of cesium bromide-passivated all‐inorganic CsPbI2Br perovskite solar cells10.1002/solr.201900254 ↗
10. Electrical loss management by molecularly manipulating dopant-free poly(3-hexylthiophene) towards 16.93% CsPbI2Br solar cells10.1002/anie.202105176 ↗
11. The distinctive phase stability and defect physics in CsPbI2Br perovskite10.1039/C9TA04839A ↗
12. Review on recent progress of all‐inorganic metal halide perovskites and solar cells10.1002/adma.201902851 ↗
13. T. Liu, X. Zhao, P. Wang, Q. C. Burlingame, J. Hu, K. Roh, Z. Xu, B. P. Rand, M. Chen, Y. L. Loo, Highly transparent, scalable, and stable perovskite solar cells with minimal aesthetic compromise, Adv. Energy Mater. 2200402.
14. Progress and perspective on inorganic CsPbI2Br perovskite solar cells10.1002/aenm.202201854 ↗
15. Accelerated aging of all-inorganic, interface-stabilized perovskite solar cells10.1126/science.abn5679 ↗
16. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
17. Improved charge transport and reduced nonradiative energy loss enable over 16% efficiency in ternary polymer solar cells10.1002/adma.201902302 ↗
18. Design and application of carbon nanomaterials for photoactive and charge transport layers in organic solar cells10.1186/s40580-016-0068-8 ↗
19. With PBDB-T as the donor, the PCE of non-fullerene organic solar cells based on small molecule INTIC increased by 52.410.3390/ma13061324 ↗
20. Localized state distribution and its effect on recombination in organic solar cells10.1103/PhysRevB.84.075208 ↗
21. Critical role of molecular electrostatic potential on charge generation in organic solar cells, Chin
22. Selective hole and electron transport in efficient quaternary blend organic solar cells10.1016/j.joule.2020.06.014 ↗
23. Solution-processed semitransparent organic photovoltaics: from molecular design to device performance
24. Device model for the operation of polymer/fullerene bulk heterojunction solar cells10.1103/PhysRevB.72.085205 ↗
25. Recombination via tail states in polythiophene: fullerene solar cells10.1103/PhysRevB.83.115209 ↗
26. Understanding the light‐intensity dependence of the short‐circuit current of organic solar cells10.1002/adts.202000116 ↗
27. An electron acceptor analogue for lowering trap density in organic solar cells
28. Relationship between energetic disorder and open-circuit voltage in bulk heterojunction organic solar cells
29. Recent progress in modeling, simulation, and optimization of polymer solar cells10.1109/JPHOTOV.2012.2193385 ↗
30. Performance analysis of organic solar cells: opto-electrical modeling and simulation
31. Investigation of recombination loss in organic solar cells by simulating intensity-dependent current–voltage measurements10.1016/j.solmat.2011.02.034 ↗
32. Influence of exponential tail states on photovoltaic parameters and recombination of bulk heterojunction organic solar cells: an optoelectronic simulation10.1007/s11082-016-0541-y ↗
33. Efficiency limits of organic bulk heterojunction solar cells10.1021/jp906292h ↗
34. Statistics of the recombinations of holes and electrons10.1103/PhysRev.87.835 ↗
35. The rational and effective design of nonfullerene acceptors guided by a semi-empirical model for an organic solar cell with an efficiency over 1510.1039/D0TA03087B ↗
36. Extracting microscopic device parameters from transient photocurrent measurements of P3HT:PCBM solar cells10.1002/aenm.201100709 ↗
37. A Gaussian model for recombination via carrier-trap distributions in organic solar cells10.1007/s10825-016-0835-0 ↗
38. Modeling nongeminate recombination in P3HT:PCBM solar cells10.1021/jp200234m ↗
39. How to find out the density of states in disordered organic semiconductors10.1103/PhysRevLett.108.226403 ↗
40. Efficient ternary polymer solar cells with two well-compatible donors and one ultranarrow bandgap nonfullerene acceptor10.1002/aenm.201702854 ↗
41. 14%-efficiency fullerene-free ternary solar cell enabled by designing a short side-chain substituted small-molecule acceptor10.1016/j.nanoen.2019.103934 ↗
42. High‐efficiency solution‐processed two‐terminal hybrid tandem solar cells using spectrally matched inorganic and organic photoactive materials10.1002/aenm.202001188 ↗
43. High performance tandem solar cells with inorganic perovskite and organic conjugated molecules to realize complementary absorption10.1021/acs.jpclett.0c02794 ↗
44. Selenium heterocyclic electron acceptor with small urbach energy for as-cast high-performance organic solar cells10.1021/jacs.0c08557 ↗
45. A universal Urbach rule for disordered organic semiconductors10.1038/s41467-021-24202-9 ↗
46. An electron acceptor analogue for lowering trap density in organic solar cells
47. A universal Urbach rule for disordered organic semiconductors10.1038/s41467-021-24202-9 ↗