Improving the electrical performance of inverted perovskite solar cell with LiF anode buffer layer
Source abstract
Abstract
Abstract Although the electrical performance of inverted PSCs is a bit lower than that of conventional PSCs at present, it has attracted increasing research attention thanks to its simple architecture for low preparation temperature and negligible hysteresis, and subsequently a high opportunity for industrial application. In general, PEDOT:PSS is employed to serve as hole transport layer (HTL) in inverted PSCs due to its high conductivity, high light transmittance, and aqueous dispersion. However, the mismatch of energy level between PEDOT:PSS and ITO is detrimental to extract the photo-induced holes, hampering further enhancement of the electrical performance of inverted PSCs. Here, a LiF anode buffer layer, whose optimization thickness is 7 nm, has been employed to modify the PEDOT:PSS HTL in inverted PSCs. Thanks to the LiF anode buffer layer, a dramatically enhancement of PCE from 16.01% of reference sample with pristine PEDOT:PSS to 18.18% of PSCs with LiF/PEDOT: PSS HTL. This enhancement is mainly ascribed to improve the charge extraction ability due to the diople effect of LiF. Therefore, this work provides a simple and effective method to increase the electrical performance of inverted PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Organic Light-Emitting Diodes Research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. A breakthrough efficiency of 19.9% obtained in inverted perovskite solar cells by using an efficient trap state passivator Cu(thiourea)I10.1021/jacs.7b01439 ↗
2. Highly efficient and stable flexible perovskite solar cells with metal oxides nanoparticle charge extraction layers10.1002/smll.201702775 ↗
3. Modulation of PEDOT:PSS pH for efficient inverted perovskite solar cells with reduced potential loss and enhanced stability10.1021/acsami.6b11757 ↗
4. Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells10.1038/ncomms10379 ↗
5. Perovskite solar cells with a DMSO-treated PEDOT:PSS hole transport layer exhibit higher photovoltaic performance and enhanced durability10.1039/C6NR08375G ↗
6. PEDOT:PSS monolayers to enhance the hole extraction and stability of perovskite solar cells10.1039/C8TA05234D ↗
7. High open-circuit voltage of 1.134 V for inverted planar perovskite solar cells with sodium citrate-doped PEDOT:PSS as a hole transport layer10.1021/acsami.9b06526 ↗
8. High-efficiency hybrid solar cells by nanostructural modification in PEDOT:PSS with co-solvent addition10.1039/c3ta14590e ↗
9. Influence of the surface treatment of PEDOT:PSS layer with high boiling point solvent on the performance of inverted planar perovskite solar cells10.1016/j.orgel.2017.05.025 ↗
10. V2O5-PEDOT:PSS bilayer as hole transport layer for highly efficient and stable perovskite solar cells10.1016/j.orgel.2017.10.034 ↗
11. Enhanced electron injection in organic electroluminescence devices using an Al/LiF electrode10.1063/1.118344 ↗
12. Interface-limited injection in amorphous organic semiconductors10.1103/PhysRevB.64.085201 ↗
13. A comparative study on the effect of monodisperse Au and Ag nanoparticles on the performance of organic photovoltaic devices10.1016/j.optmat.2021.111082 ↗
14. Compositional and interfacial engineering yield high-performance and stable p-i-n perovskite solar cells and mini-modules10.1021/acsami.0c17893 ↗
15. Investigation performance enhancement of bulk heterojunction organic solar cells
16. Ultrathin anode buffer layer for enhancing performance of polymer solar cells
17. Effect of guanidinium chloride in eliminating O2-electron extraction barrier on a SnO2 surface to enhance the efficiency of perovskite solar cells10.1039/D0RA01501F ↗
18. Self-woven monolayer polyionic mesh to achieve highly efficient and stable inverted perovskite solar cells10.1016/j.cej.2021.132074 ↗
19. Efficient perovskite solar cell fabricated in ambient air using one-step spin-coating10.1039/C6RA05893K ↗
20. Pentacene as a hole transport material for high performance planar perovskite solar cells10.1016/j.cap.2018.05.022 ↗
21. Nuclei position-control and crystal growth-guidance on frozen substrates for high-performance perovskite solar cells10.1039/C9NR02777G ↗
22. LiF thickness dependence of electron injection models for Alq3/LiF/Al cathode structure, Chinese
23. Laser fabricated carbon quantum dots in anti-solvent for highly efficient carbon-based perovskite solar cells10.1016/j.jcis.2021.05.034 ↗
24. Controllable multistep preparation method for high‐efficiency perovskite solar cells with low annealing temperature in glove box10.1002/ente.202000071 ↗
25. High performance planar p-i-n perovskite solar cells based on a thin Alq3 cathode buffer layer10.1039/C8RA01633J ↗