journal article·2015-08

Benzodithiophene-based two-dimensional polymers with extended conjugated thienyltriphenylamine substituents for high-efficiency polymer solar cells

Qunping Fan, Yu Liu, Pingao Yang, Wenyan Su, Manjun Xiao, Jianhua Chen, Min Li, Xiangdong Wang, Yafei Wang, Hua Tan, Renqiang Yang, Weiguo Zhu

Publisher page

Abstract

Two novel donor-acceptor (D-A)-type two-dimensional (2-D) polymers of PTTPABDT-DTBT and PTTPABDT-DFDTBT were synthesized and characterized, in which extended conjugated side chained 4-thienyltriphenylamine benzo[1,2-b: 4,5-b'] dithiophene (TTPABDT) as the donor unit, thiophene (T) as the p-bridge, benzo[c][1,2,5] thiadiazole (BT) and 5,6-difluorobenzo[c][1,2,5] thiadiazole (DFBT) as the acceptor units. Due to the introduction of the extended conjugated side chained TTPA, polymers exhibited good thermal stabilities, broad absorption spectra and narrow optical band gaps. The hole mobility of 2.15 x 10(-4) cm(2) V-1 s(-1) was obtained in the PTTPABDT-DFDTBT/PC71BM blended film, which is two times higher than that of the PTTPABDT-DTBT/PC71BM blended film. Finally, the PTTPABDT-DFDTBT/PC71BM-based polymer solar cells presented the best power conversion efficiency (PCE) of 4.29% with a fill factor (FF) of 62.5%, while PTTPABDT-DTBT-based devices shown a PCE of 3.92% with a FF of 58.8%. The results indicate that the introduction of the extended conjugated TTPA side chain into the D-A-type 2-D polymers is an efficient approach to improve photovoltaic performances for its resulting polymers. (C) 2015 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
2. Polymer solar cells10.1038/nphoton.2012.11 ↗
3. Polymers for electronics and spintronics10.1039/c3cs60257e ↗
4. Donor-acceptor conjugated polymers based on multifused ladder-type arenes for organic solar cells
5. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
6. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
7. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
8. Design of terpolymers as electron donors for highly efficient polymer solar cells10.1039/C4TA02426E ↗
9. Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells10.1021/ja406220a ↗
10. Fluorine substitution enhanced photovoltaic performance of a D–A1–D–A2 copolymer10.1039/c3cc44931a ↗
11. Donor-acceptor copolymers based on benzo[1,2-b:4,5-b′]dithiophene and pyrene-fused phenazine for high-performance polymer solar cells10.1016/j.orgel.2014.09.019 ↗
12. High open-circuit voltage polymer solar cells based on D–A copolymer of indacenodithiophene and fluorine-substituted benzotriazole10.1016/j.orgel.2013.12.020 ↗
13. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
14. Donor–acceptor copolymers incorporating polybenzo[1,2-b:4,5-b′]dithiophene and tetrazine for high open circuit voltage polymer solar cells10.1016/j.orgel.2013.05.015 ↗
15. Fluorinated benzothiadiazole-based conjugated polymers for high-performance polymer solar cells without any processing additives or post-treatments10.1021/ja409881g ↗
16. Significant enhancement of polymer solar cell performance via side-chain engineering and simple solvent treatment10.1021/cm401618h ↗
17. Tailored donor–acceptor polymers with an A–D1–A–D2 structure: controlling intermolecular interactions to enable enhanced polymer photovoltaic devices10.1021/ja500935d ↗
18. Highly efficient 2D-conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗
19. Location and number of selenium atoms in two-dimensional conjugated polymers affect their band-gap energies and photovoltaic performance10.1021/ma501720k ↗
20. Side chain structure affects the photovoltaic performance of two-dimensional conjugated polymers10.1021/ma401897b ↗
21. Efficient polymer solar cells based on benzothiadiazole and alkylphenyl substituted benzodithiophene with a power conversion efficiency over 8%10.1002/adma.201301494 ↗
22. Hyperconjugated side chained benzodithiopheneand 4,7-dithienyl-2,1,3-benzothiadiazole based polymer for solar cells10.1039/c3py01529g ↗
23. Structural design of benzo[1,2-b:4,5-b′]dithiophene-based 2D-conjugated polymers with bithienyl and terthienyl substituents toward photovoltaic applications10.1021/ma401846n ↗
24. Thieno[3,2-b]thiophene-substituted benzo[1,2-b:4,5-b′]dithiophene as a promising building block for low bandgap semiconducting polymers for high-performance single and tandem organic photovoltaic cells10.1021/cm4035903 ↗
25. Alkoxyphenylthiophene linked benzodithiophene based medium band gap polymers for organic photovoltaics: efficiency improvement upon methanol treatment depends on the planarity of backbone10.1021/ma5010875 ↗
26. Extending π-conjugation system with benzene: an effective method to improve the properties of benzodithiophene-based polymer for highly efficient organic solar cells10.1021/ma501756p ↗
27. Vacuum-deposited small molecule organic solar cells with high power conversion efficiencies by judicious molecular design and device optimization10.1021/ja301872s ↗
28. Improved photovoltaic performance of a side-chain D–A polymer in polymer solar cells by shortening the phenyl spacer between the D and A units10.1002/macp.201400298 ↗
29. Use of benzothiadiazole-triphenylamine amorphous polymer for reproducible performance of polymer-fullerene bulk-heterojunction solar cells10.1016/j.orgel.2012.05.037 ↗
30. Conjugated side-chain isolated polythiophene: synthesis and photovoltaic application10.1021/ma201718x ↗
31. A bifunctional copolymer additive to utilize photoenergy transfer and to improve hole mobility for organic ternary bulk-heterojunction solar cell10.1021/am501209t ↗
32. Donor–acceptor semiconducting polymers containing benzodithiophene with bithienyl substituents10.1021/ma301624t ↗
33. Structural variation of donor-acceptor copolymers containing benzodithiophene with bithienyl substituents to achieve high open circuit voltage in bulk heterojunction solar cells10.1039/c3ta13686h ↗
34. New quinoxaline and pyridopyrazine-based polymers for solution-processable photovoltaics10.1016/j.solmat.2012.06.029 ↗
35. Conjugated random copolymers of benzodithiophene–benzooxadiazole–diketopyrrolopyrrole with full visible light absorption for bulk heterojunction solar cells10.1039/c3py00132f ↗
36. A benzoselenadiazole-based low band gap polymer: synthesis and photovoltaic application10.1021/ma302596k ↗
37. A polybenzo[1,2-b:4,5-b′]dithiophene derivative with deep HOMO level and its application in high-performance polymer solar cells10.1002/anie.200906934 ↗
38. Efficient two layer leds on a polymer blend basis10.1002/adma.19950070608 ↗
39. Fluorine substituents reduce charge recombination and drive structure and morphology development in polymer solar cells10.1021/ja309289u ↗
40. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
41. Donor–acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells10.1021/ja201131h ↗
42. Thiophene-fused benzothiadiazole: a strong electron-acceptor unit to build D–A copolymer for highly efficient polymer solar cells10.1021/cm501052a ↗
43. Substituent effects on physical and photovoltaic properties of 5,6-difluorobenzo[c][1,2,5]thiadiazole-based D–A polymers: toward a donor design for high performance polymer solar cells10.1021/ma401709r ↗
44. Formation of a ground-state charge-transfer complex in polyfluorene/[6,6]-phenyl-C61butyric acid methyl ester (PCBM) blend films and its role in the function of polymer/PCBM solar cells10.1002/adfm.200600484 ↗
45. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency10.1002/anie.201005451 ↗