Synthesis and photovoltaic properties of new small molecules with rhodanine derivative as the end-capped blocks
Source abstract
Abstract
Two new acceptor-donor-acceptor (A-D-A) type small molecules DCAO3TIDT and DCNR3TIDT, with 4,4,9,9-tetrakis(4-(dodecyloxy) phenyl)-4,9-dihydro-s-indaceno-[1,2-b:5,6-b']dithiophene (IDT) as the core group and 2-ethylhexyl cyanoacetate (CAO) and 2-(1,1-dicyanomethylene)-3-octyl rhodanine (CNR) as different end-capped blocks, have been designed and synthesized. Both of them have been employed as donor for solution-processed bulk hetero-junction (BHJ) organic solar cells (OSCs). The two compounds showed deep highest occupied molecular orbital (HOMO) energy levels (similar to-5.30 eV) and strong absorption. The DCAO3TIDT and DCNR3TIDT with PC71BM as acceptor based BHJ solar cell devices showed short circuit current density (J(sc)) of 6.93 mA/cm(2) and 8.59 mA/cm2, power conversion efficiency (PCE) of 3.34% and 4.27%, respectively, and with almost same open-circuit voltage (similar to 0.93 V), under the illumination of AM 1.5 G, 100 mW/cm(2). The high Jsc for DCNR3TIDT could result from its wider and red-shifted absorption than that of DCAO3TIDT, which was probably induced by the end-capped block rhodanine derivative. The results demonstrate that the end group would be taken into full account when designing new solution-processed small molecules, which is an important factor to determine their photovoltaic properties. (C) 2015 Elsevier B.V. All rights reserved.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Polymer photovoltaic cells – enhanced efficiencies via a network of internal donor–acceptor heterojunctions10.1126/science.270.5243.1789 ↗
2. Synthesis of 5H-dithieno[3,2-b:2′,3′-d]pyran as an electron-rich building block for donor–acceptor type low-bandgap polymers10.1021/ma400452j ↗
3. Efficient polymer solar cells based on terpolymers with a broad absorption range of 300–900nm10.1039/c4ta00020j ↗
4. Naphthodithiophene–naphthobisthiadiazole copolymers for solar cells: alkylation drives the polymer backbone flat and promotes efficiency10.1021/ja404064m ↗
5. High-efficiency polymer solar cells via the incorporation of an amino-functionalized conjugated metallopolymer as a cathode interlayer10.1021/ja408363c ↗
6. Synthesis and photovoltaic properties of two-dimensional conjugated polythiophenes with bi(thienylenevinylene) side chains10.1021/ja060141m ↗
7. Linear side chains in benzo[1,2-b:4,5-b′]dithiophene–thieno[3,4-c]pyrrole-4, 6-dione polymers direct self-assembly and solar cell performance10.1021/ja400365b ↗
8. Inverted polymer solar cells with 8.4% efficiency by conjugated polyelectrolyte10.1039/c2ee22296e ↗
9. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
10. High-molecular-weight regular alternating diketopyrrolopyrrole-based terpolymers for efficient organic solar cells10.1002/anie.201302319 ↗
11. High-mobility ambipolar transistors and high-gain inverters from a donor–acceptor copolymer semiconductor10.1002/adma.200901819 ↗
12. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
13. Self-organization of amine-based cathode interfacial materials in inverted polymer solar cells10.1021/nn4059067 ↗
14. [6,6]-Phenyl-C61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl ester as an acceptor and cathode interfacial material in polymer solar cells10.1021/am5007047 ↗
15. Designing π-conjugated polymers for organic electronics10.1016/j.progpolymsci.2013.09.005 ↗
16. Tailored donor–acceptor polymers with an a–d1–a–d2 structure: controlling intermolecular interactions to enable enhanced polymer photovoltaic devices10.1021/ja500935d ↗
17. Solution-processed small-molecule solar cells with 6.7% efficiency10.1038/nmat3160 ↗
18. A modular molecular framework for utility in small-molecule solution-processed organic photovoltaic devices10.1039/c1jm11963j ↗
19. A Planar small molecule with dithienosilole core for high efficiency solution-processed organic photovoltaic cells10.1021/cm202588h ↗
20. Manipulation of the open-circuit voltage of organic solar cells by desymmetrization of the structure of acceptor–donor–acceptor molecules10.1002/adfm.201101508 ↗
21. Microstructural characterization and charge transport in thin films of conjugated polymers10.1002/adma.200903712 ↗
22. Solution-processed and high-performance organic solar cells using small molecules with a benzodithiophene unit10.1021/ja403318y ↗
23. Organic photovoltaics10.1021/ar900238j ↗
24. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
25. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
26. 2-(1,1-Dicyanomethylene)rhodanine A novel, efficient electron acceptor10.1016/j.dyepig.2010.08.011 ↗
27. Rhodanine-methine as π-electron acceptor in second-order nonlinear optical chromophores10.1016/S0040-4039(00)76683-4 ↗
28. Spectroscopic and ab␣initio study of an intramolecular charge transfer (ICT) rhodanine derivative10.1016/j.molstruc.2007.03.044 ↗
29. Impact of dye end groups on acceptor–donor–acceptor type molecules for solution-processed photovoltaic cells10.1039/c2jm30194f ↗
30. Stable dyes containing double acceptors without COOH as anchors for highly efficient dye-sensitized solar cells10.1002/anie.201204948 ↗
31. A star-shaped oligothiophene end-capped with alkyl cyanoacetate groups for solution-processed organic solar cells10.1039/c2cc35333d ↗
32. High open-circuit voltage polymer solar cells based on D–A copolymer of indacenodithiophene and fluorine-substituted benzotriazole10.1016/j.orgel.2013.12.020 ↗
33. Synthesis, characterization, charge transport, and photovoltaic properties of dithienobenzoquinoxaline- and dithienobenzopyridopyrazine-based conjugated polymers10.1021/ma2008699 ↗
34. Synthesis and photovoltaic properties of D–A copolymers based on alkyl-substituted indacenodithiophene donor unit10.1021/cm2019586 ↗
35. Low-bandgap conjugated polymer for high efficient photovoltaic applications10.1039/c0cc01087a ↗
36. Influence of D/A ratio on photovoltaic performance of a highly efficient polymer solar cell system10.1002/adma.201202719 ↗
37. Pi–pi stacking vs. steric effects in stereoselectivity control: highly diastereoselective synthesis of syn-1,2-diarylpropylamines10.1002/chem.200601893 ↗
38. Efficient polymer solar cells with thin active layers based on alternating polyfluorene copolymer/fullerene bulk heterojunctions10.1002/adma.200900510 ↗
39. Highly efficient new indoline dye having strong electron-withdrawing group for zinc oxide dye-sensitized solar cell10.1016/j.tet.2011.06.016 ↗
40. High efficiency of dye-sensitized solar cells based on metal-free indoline dyes10.1021/ja0488277 ↗
41. Poly(diketopyrrolopyrrole–terthiophene) for ambipolar logic and photovoltaics10.1021/ja907506r ↗
42. A selenium-substituted low-bandgap polymer with versatile photovoltaic applications10.1002/adma.201203827 ↗
43. Space-charge limited photocurrent10.1103/PhysRevLett.94.126602 ↗
44. Ladder-type oligo-p-phenylene-containing copolymers with high open-circuit voltages and ambient photovoltaic activity10.1021/ja909111p ↗
45. Annealing-free P3HT:PCBM-based organic solar cells via two halohydrocarbons additives with similar boiling points10.1016/j.mseb.2013.10.009 ↗
46. The effect of thermal treatment on the morphology and charge carrier dynamics in a polythiophene–fullerene bulk heterojunction10.1002/adfm.200400559 ↗
47. Effect of trace solvent on the morphology of P3HT:PCBM bulk heterojunction solar cells10.1002/adfm.201002372 ↗
48. Plastic solar cells10.1002/1616-3028(200102)11:1<15::AID-ADFM15>3.0.CO;2-A ↗