Improving the efficiency and stability of in-air fabricated perovskite solar cells using the mixed antisolvent of methyl acetate and chloroform
Source abstract
Abstract
Antisolvents play a significant role in obtaining high-quality perovskite films during the fabrication process. This paper reports a novel mixture of two antisolvents (methyl acetate and chloroform) that proves effective for fabricating high-quality perovskite films in a high humidity ambient. The results show that the use of methyl acetate alone as the antisolvent enables the fabrication of dense perovskite films (MAPbI3) in a high humidity ambient, but with a rough surface, while mixing methyl acetate with an appropriate amount of chloroform produces not only dense perovskite films but also smooth surfaces. As a result, the power conversion efficiency (PCE) is increased from 17.1% of the devices treated with methyl acetate alone to 18.6% of the devices treated with the mixed antisolvent of methyl acetate (70%) and chloroform (30%). The stability of the devices was also improved significantly for the devices treated with the mixed antisolvent of methyl acetate (85%) and chloroform (15%), which exhibit a slow degradation of 7% in PCE after 552 h of storage, compared to 22% for the devices treated with methyl acetate alone.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Titanium-defected undoped anatase TiO2with p-type conductivity, room-temperature ferromagnetism, and remarkable photocatalytic performance10.1021/ja512047k ↗
2. Highly reproducible organometallic halide perovskite microdevices based on top-down lithography
3. Formamidinium lead trihalide: a broadly tunable perovskite for efficient planar heterojunction solar cells10.1039/c3ee43822h ↗
4. Effective approach for reducing the migration of ions and improving the stability of organic-inorganic perovskite solar cells10.1016/j.jallcom.2018.01.082 ↗
5. Efficiency enhancement of perovskite solar cells using structural and morphological improvement of CH3NH3PbI3 absorber layers10.1088/2053-1591/aaa616 ↗
6. Optimum silver contact sputtering parameters for efficient perovskite solar cell fabrication10.1016/j.solmat.2021.111185 ↗
7. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
8. Stable perovskite solar cells with efficiency exceeding 24.8% and 0.3-V voltage loss10.1126/science.abb7167 ↗
9. Efficient perovskite solar cells via improved carrier management10.1038/s41586-021-03285-w ↗
10. Intrinsic thermal instability of methylammonium lead trihalide perovskite10.1002/aenm.201500477 ↗
11. Efficient and stable perovskite solar cells prepared in ambient air irrespective of the humidity10.1038/ncomms11105 ↗
12. Stabilizing the α-phase of CsPbI3Perovskite by sulfobetaine zwitterions in one-step spin-coating films10.1016/j.joule.2017.07.017 ↗
13. Entropic stabilization of mixed A-cation ABX 3 metal halide perovskites for high performance perovskite solar cells10.1039/C5EE03255E ↗
14. Recent progress in stability of perovskite solar cells10.1088/1674-4926/38/1/011002 ↗
15. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties10.1021/ic401215x ↗
16. Enhanced performance of tin halide perovskite solar cell by addition of lead thiocyanate10.1039/C8RA00809D ↗
17. Sn 2+ —stabilization in MASnI 3 perovskites by superhalide incorporation10.1063/1.5023737 ↗
18. Bilateral interface engineering toward efficient 2D-3D bulk heterojunction tin halide lead-free perovskite solar cells10.1021/acsenergylett.8b00085 ↗
19. Recent progress on the long-term stability of perovskite solar cells10.1002/advs.201700387 ↗
20. Largely enhanced V OC and stability in perovskite solar cells with modified energy match by coupled 2D interlayers10.1039/C7TA11295E ↗
21. Dependence of acetate-based antisolvents for high humidity fabrication of CH3NH3PbI3Perovskite devices in ambient atmosphere10.1021/acsami.8b02554 ↗
22. Humidity resistant fabrication of CH3NH3PbI3perovskite solar cells and modules10.1016/j.nanoen.2017.06.039 ↗
23. Mixed antisolvents assisted treatment of perovskite for photovoltaic device efficiency enhancement10.1016/j.orgel.2018.01.009 ↗
24. Controlled growth of CH3NH3PbI3films towards efficient perovskite solar cells by varied-stoichiometric intermediate adduct10.1016/j.apsusc.2017.01.240 ↗
25. Highly reproducible perovskite solar cells via controlling the morphologies of the perovskite thin films by the solution-processed two-step method10.1007/s10854-018-9734-4 ↗
26. Perovskites fabricated with volatile anti-solvents for more efficient solar cells10.1016/j.molstruc.2018.08.021 ↗
27. Highly efficient and stable MAPbI3perovskite solar cell induced by regulated nucleation and ostwald recrystallization10.3390/ma11050778 ↗
28. Selection of an anti-solvent for efficient and stable cesium-containing triple cation planar perovskite solar cells10.1039/C8NR03580F ↗
29. A general approach to high-efficiency perovskite solar cells by any antisolvent10.1038/s41467-021-22049-8 ↗
30. The mechanism of universal green antisolvents for intermediate phase controlled high-efficiency formamidinium-based perovskite solar cells10.1039/C9MH01679A ↗
31. NIOSH Pocket Guide to Chemical Hazards. DHHS (NIOSH) Publication 2005-149, (2007).
32. Solvent Miscibility Table. Available at: https://www.sigmaaldrich.com/chemistry/solvents/solvent-miscibility-table.html. (Accessed: 29th November 2020).
33. Stitching triple cation perovskite by a mixed anti-solvent process for high performance perovskite solar cells10.1016/j.nanoen.2017.07.046 ↗
34. Effect of anti-solvent mixture on the performance of perovskite solar cells and suppression hysteresis behavior10.1016/j.orgel.2018.08.048 ↗
35. Regulated perovskite crystallinity via green mixed antisolvent for efficient perovskite solar cells10.1016/j.orgel.2019.03.021 ↗
36. Stitching triple cation perovskite by a mixed anti-solvent process for high performance perovskite solar cells10.1016/j.nanoen.2017.07.046 ↗
37. Ultrasmooth perovskite film via mixed anti-solvent strategy with improved efficiency10.1021/acsami.6b14270 ↗
38. Ambient-air fabrication of stable mixed cation perovskite planar solar cells with efficiencies exceeding 22% using a synergistic mixed antisolvent with complementary properties10.1016/j.nanoen.2021.106387 ↗
39. Highly reproducible perovskite solar cells with average efficiency of 18.3% and best efficiency of 19.7% fabricated via lewis base adduct of lead(II) iodide10.1021/jacs.5b04930 ↗
40. π-Conjugated small molecules enable efficient perovskite growth and charge-extraction for high-performance photovoltaic devices10.1016/j.jpowsour.2019.227420 ↗
41. Dipole moments of glycerol, isopropyl alcohol, and isobutyl alcohol10.1139/v68-084 ↗
42. The total molecular dipole moment for liquid water10.1063/1.1501122 ↗
43. New statistical mechanical model for calculating Kirkwood factors in self-associating liquid systems and its application to alkanol+cyclohexane mixtures10.1063/1.2756839 ↗
44. Kirkwood correlation factors in liquid mixtures from an extended Onsager-Kirkwood-Fröhlich equation10.1039/c1cp20142e ↗
45. Efficiency enhancement of perovskite solar cells via electrospun CuO nanowires as buffer layers
46. Understanding degradation mechanisms and improving stability of perovskite photovoltaics10.1021/acs.chemrev.8b00336 ↗
47. Impedance spectroscopy characterisation of highly efficient silicon solar cells under different light illumination intensities10.1039/b812468j ↗
48. Chemical capacitance of nanostructured semiconductors: its origin and significance for nanocomposite solar cells10.1039/b310907k ↗
49. Theory of impedance and capacitance spectroscopy of solar cells with dielectric relaxation, drift-diffusion transport, and recombination10.1021/jp5062144 ↗
50. Rapid oxidation of the hole transport layer in perovskite solar cells by A low-temperature plasma
51. Stabilizing perovskite structures by tuning tolerance factor: formation of formamidinium and cesium lead iodide solid-state alloys10.1021/acs.chemmater.5b04107 ↗
52. Gradated mixed hole transport layer in a perovskite solar cell: improving moisture stability and efficiency10.1021/acsami.7b07071 ↗