Structural ordering versus energy band alignment: Effects of self-assembled monolayers on the metal/semiconductor interfaces of small molecule organic thin-film transistors
Source abstract
Abstract
A model describing the influence of self-assembled monolayers on the contact resistance of bottom-contact organic thin-film transistors is presented. The model takes the contact geometry, the energy level alignment and the structural order of the organic films into consideration when describing the contact effects of organic transistors. The treatment of the metal source/drain electrodes of the transistors by self-assembled monolayers allows for tuning the work function of the metal contact and an improved ordering of the organic molecules on top of the source/drain contacts. The results reveal that the contact resistance is mainly determined by the molecular ordering, rather than the tuning of the work function. The model is compared to experimentally measured contact resistances for different self-assembled monolayers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Molecular Junctions and Nanostructures · Nanowire Synthesis and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Active matrix OTFT display with anodized gate dielectric10.1109/JDT.2008.921903 ↗
2. An organic TFT backplane for foldable displays fabricated by scalable and low-cost processes10.1002/j.2168-0159.2014.tb00188.x ↗
3. Contact resistance and megahertz operation of aggressively scaled organic transistors10.1002/smll.201101677 ↗
4. Scaling limits of organic thin film transistors10.1016/j.orgel.2010.01.002 ↗
5. Scaling limits of organic digital circuits10.1016/j.orgel.2013.11.028 ↗
6. On the origin of contact resistances of organic thin film transistors10.1002/adma.201201311 ↗
7. An experimental study of contact effects in organic thin film transistors10.1063/1.2215132 ↗
8. Thin film deposition, patterning, and printing in organic thin film transistors10.1021/cm0496117 ↗
9. Rectifying semiconductor contacts10.1149/1.2430178 ↗
10. Note on the contact between a metal and an insulator or semiconductor10.1017/S0305004100020570 ↗
11. Simplified and expanded theory of boundary layer rectifiers10.1007/BF01329843 ↗
12. Interface dipole at metal–organic interfaces: contribution of the metal induced interface states10.1063/1.3099836 ↗
13. Energy level alignment at organic semiconductor/metal interfaces: effect of polar self-assembled monolayers at the interface10.1063/1.2832306 ↗
14. Contact effects in polymer transistors10.1063/1.1512950 ↗
15. Schroder · 2006
16. Sze · 1981
17. Energy level alignment at organic heterojunctions: role of the charge neutrality level10.1103/PhysRevB.71.041306 ↗
18. Energy level alignment and interfacial electronic structures at organic/metal and organic/organic interfaces10.1002/(SICI)1521-4095(199906)11:8<605::AID-ADMA605>3.0.CO;2-Q ↗
19. Interfacial chemistry of Alq3 and LiF with reactive metals10.1063/1.1324681 ↗
20. Molecular level alignment at organic semiconductor-metal interfaces10.1063/1.121940 ↗
21. Electronegativity model for barrier formation at metal/organic interfaces10.1063/1.2149178 ↗
22. Thermodynamic equilibrium and metal–organic interface dipole10.1063/1.1512826 ↗
23. Impact of an interface dipole layer on molecular level alignment at an organic-conductor interface studied by ultraviolet photoemission spectroscopy10.1103/PhysRevB.70.085304 ↗
24. Experimental estimation of the electric dipole moment and polarizability of titanyl phthalocyanine using ultraviolet photoelectron spectroscopy10.1103/PhysRevB.73.041302 ↗
25. Lower hole-injection barrier between pentacene and a 1-hexadecanethiol-modified gold substrate with a lowered work function10.1016/j.orgel.2007.07.006 ↗
26. Molecular rectification in a metal-insulator-metal junction based on self-assembled monolayers10.1021/ja020506c ↗
27. Multiscale modeling of the electrostatic impact of self-assembled monolayers used as gate dielectric treatment in organic thin-film transistors10.1021/am503873f ↗
28. Microcontact printing and selective surface dewetting for large area electronic applications10.1016/j.tsf.2006.11.178 ↗
29. Formation and structure of self-assembled monolayers10.1021/cr9502357 ↗
30. Controlling charge injection in organic electronic devices using self-assembled monolayers10.1063/1.120381 ↗
31. Controlling Schottky energy barriers in organic electronic devices using self-assembled monolayers10.1103/PhysRevB.54.R14321 ↗
32. Improving charge injection in organic thin-film transistors with thiol-based self-assembled monolayers10.1016/j.orgel.2008.01.004 ↗
33. Improved morphology and charge carrier injection in pentacene field-effect transistors with thiol-treated electrodes10.1063/1.2400507 ↗
34. Self-aligned surface treatment for thin-film organic transistors10.1063/1.2207846 ↗
35. Electrical stability of pentacene thin film transistors10.1016/j.orgel.2007.06.005 ↗
36. M. Benwadih, J. Tallal, Process for manufacturing a self-assembled injection monolayer, US 20130316541 A1, 2013.
37. Modification of gold source and drain electrodes by self-assembled monolayer in staggered n- and p-channel organic thin film transistors10.1016/j.orgel.2009.10.021 ↗
38. Conjugated organic molecules on metal versus polymer electrodes: demonstration of a key energy level alignment mechanism10.1063/1.1532102 ↗
39. Organic molecular films on gold versus conducting polymer: influence of injection barrier height and morphology on current–voltage characteristics10.1063/1.1565506 ↗
40. Extrinsic limiting factors of carrier transport in organic field-effect transistors10.1007/s00339-008-4991-3 ↗
41. Pentacene thin film transistors on inorganic dielectrics: morphology, structural properties, and electronic transport10.1063/1.1525068 ↗
42. Effects of annealing on the mobility and morphology of thermally activate pentacene thin film transistors10.1063/1.2193055 ↗
43. Growth of pentacene on clean and modified gold surfaces10.1103/PhysRevB.75.085309 ↗
44. Electrical characterization of metal/pentacene contacts10.1063/1.2424396 ↗