journal article·2024-06

Effect of mild mechanical stresses on device physics of slot-die coated flexible perovskite solar cells

Hryhorii P. Parkhomenko, Yerassyl Yerlanuly, Viktor V. Brus, Askhat N. Jumabekov

Organic Electronics· Volume 129
Publisher page

Abstract

Halide perovskites are a promising class of novel photoactive materials for their application in flexible photovoltaic devices. Tolerance and stability of devices to various mechanical stresses are important aspects of this technology for its effective and long-term operation. Currently, this aspect has not been fully researched and addressed by the research community. Hence, this work is aimed at studying the effect of mild mechanical stresses (MMSs) induced by convex bending on the behaviour of ITO/ZnO/MAPbI 3 /Spiro-OMeTAD/Au slot-die-coated flexible perovskite solar cells (FPSCs) and investigating the underlying mechanisms leading to performance degradation in devices. The carrier generation, recombination, and extraction processes within FPSCs are investigated before and after the application of MMSs. The obtained results suggest that the photovoltaic performance of the FPSCs deteriorates by up to 50% after convex bending, due to increased non-radiative recombination losses. The results obtained in this work provide some valuable insights into the dynamics of recombination processes in FPSCs exposed to MMSs and can be used for developing new strategies for improving the mechanical stability of devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (80)

Show source-provided references
1. Organometallic-functionalized interfaces for highly efficient inverted perovskite solar cells10.1126/science.abm8566 ↗
2. Impact of a short-pulse high-intense proton irradiation on high-performance perovskite solar cells
3. Selection of the ultimate perovskite solar cell materials and fabrication processes towards its industrialization: a review10.1002/ese3.1084 ↗
4. Progress on the stability and encapsulation techniques of perovskite solar cells10.1016/j.orgel.2022.106515 ↗
5. Applications of atomic layer deposition and chemical vapor deposition for perovskite solar cells10.1039/D0EE00385A ↗
6. High performance perovskite solar cells by hybrid chemical vapor deposition10.1039/C4TA04385E ↗
7. Fabrication of efficient planar perovskite solar cells using a one-step chemical vapor deposition method10.1038/srep14083 ↗
8. Highly efficient and stable inorganic CsPbBr3 perovskite solar cells via vacuum co-evaporation10.1016/j.apsusc.2021.150153 ↗
9. Shengzhong (Frank) Liu, Superior stability for perovskite solar cells with 20% efficiency using vacuum co-evaporation10.1039/C7NR04501H ↗
10. From scalable solution fabrication of perovskite films towards commercialization of solar cells10.1039/C8EE03025A ↗
11. Control of crystal growth toward scalable fabrication of perovskite solar cells
12. Rapid 2D patterning of high-performance perovskites using large area flexography10.1002/adfm.202306312 ↗
13. Recent progress of flexible perovskite solar cells10.1016/j.nantod.2021.101155 ↗
14. Gravure-printed flexible perovskite solar cells: toward roll-to-roll manufacturing
15. Perovskite solar cells based on screen-printed thin films10.1038/s41586-022-05346-0 ↗
16. Perovskite solar cells with all-inkjet-printed absorber and charge transport layers10.1002/admt.202000271 ↗
17. Stepping toward portable optoelectronics with SnO2 quantum dot-based electron transport layers10.1021/acsomega.3c02341 ↗
18. Solution-Processed SnO2 quantum dots for the electron transport layer of flexible and printed perovskite solar cells10.3390/nano12152615 ↗
19. Roll-to-roll gravure-printed flexible perovskite solar cells using eco-friendly antisolvent bathing with wide processing window10.1038/s41467-020-18940-5 ↗
20. Metal halide perovskite-based flexible tandem solar cells: next-generation flexible photovoltaic technology10.1039/D1QM00279A ↗
21. Unveiling predominant air-stable organotin bromide perovskite toward mechanical energy harvesting10.1021/acsami.0c01331 ↗
22. Progress and challenges toward effective flexible perovskite solar cells10.1007/s40820-023-01165-8 ↗
23. In situ crosslinking-assisted perovskite grain growth for mechanically robust flexible perovskite solar cells with 23.4% efficiency10.1016/j.joule.2022.12.013 ↗
24. Inhibited crack development by compressive strain in perovskite solar cells with improved mechanical stability10.1002/adma.202211257 ↗
25. Flexible perovskite solar cells with simultaneously improved efficiency, operational stability, and mechanical reliability10.1016/j.joule.2021.04.014 ↗
26. A bendable nickel oxide interfacial layer via polydopamine crosslinking for flexible perovskite solar cells10.1039/C9CC00479C ↗
27. A smart flexible solid state photovoltaic device with interfacial cooling recovery feature through thermoreversible polymer gel electrolyte10.1002/smll.201800842 ↗
28. Perovskite grains embraced in a soft fullerene network make highly efficient flexible solar cells with superior mechanical stability
29. Enhanced efficiency and mechanical robustness of flexible perovskite solar cells by using HPbI3 additive10.1002/solr.202000821 ↗
30. Thermally driven self-healing efficient flexible perovskite solar cells10.1016/j.nanoen.2022.107523 ↗
31. Thermal dynamic self-healing supramolecular dopant towards efficient and stable flexible perovskite solar cells10.1002/ange.202116602 ↗
32. In situ polymerizing internal encapsulation strategy enables stable perovskite solar cells toward lead leakage suppression10.1002/adfm.202302270 ↗
33. Recent advances in flexible perovskite solar cells: fabrication and applications10.1002/anie.201809781 ↗
34. From defects to degradation: a mechanistic understanding of degradation in perovskite solar cell devices and modules10.1002/aenm.201904054 ↗
35. High bending durability of efficient flexible perovskite solar cells using metal oxide electron transport layer10.1021/acs.jpcc.8b05008 ↗
36. Rational interface design and morphology control for blade-coating efficient flexible perovskite solar cells with a record fill factor of 81
37. Interfacial engineering of front-contact with finely tuned polymer interlayers for high-performance large-area flexible perovskite solar cells10.1016/j.nanoen.2019.05.072 ↗
38. Room-temperature-Processed, carbon-based fully printed mesoscopic perovskite solar cells with 15% efficiency
39. A simple approach for unraveling optoelectronic processes in organic solar cells under short-circuit conditions10.1002/aenm.202002760 ↗
40. Accounting for interference, scattering, and electrode absorption to make accurate internal quantum efficiency measurements in organic and other thin solar cells10.1002/adma.201000883 ↗
41. McGehee Group - Stanford Materials Science and Engineering, (n.d.). https://web.stanford.edu/group/mcgehee/transfermatrix/(accessed May 9, 2022).
42. Cerium oxide standing out as an electron transport layer for efficient and stable perovskite solar cells processed at low temperature10.1039/C6TA07541J ↗
43. Extreme radiation resistance of self-powered high-performance Cs0.04Rb0.04(FA0.65MA0.35)0.92Pb(I0.85Br0.14Cl0.01)3 perovskite photodiodes
44. Residual film stresses in perovskite solar cells: origins, effects, and mitigation strategies10.1021/acsomega.1c04814 ↗
45. Engineering stress in perovskite solar cells to improve stability
46. Strain effects on flexible perovskite solar cells10.1002/advs.202304733 ↗
47. Pre-buried additive for cross-layer modification in flexible perovskite solar cells with efficiency exceeding 2210.1002/adma.202109879 ↗
48. A simple approach for unraveling optoelectronic processes in organic solar cells under short-circuit conditions10.1002/aenm.202002760 ↗
49. Fundamental understanding of photocurrent hysteresis in perovskite solar cells
50. Structural, electrical, and photoelectric properties of p-NiO/n-CdTe heterojunctions10.1117/1.OE.57.1.017116 ↗
51. Fahrenbruch · 2012
52. Temperature dependences of the electrical parameters of anisotype NiO/CdTe heterojunctions10.1134/S1063782617030216 ↗
53. Optical expediency of back electrode materials for organic near-infrared photodiodes10.1021/acsami.1c04036 ↗
54. A high-detectivity, fast-response, and radiation-resistant TiN/CdZnTe heterojunction photodiode
55. Optical and electrical properties of thin NiO films deposited by reactive magnetron sputtering and spray pyrolysis10.1134/S0030400X17060145 ↗
56. Recombination in polymer-fullerene bulk heterojunction solar cells10.1103/PhysRevB.82.245207 ↗
57. Origin of the light intensity dependence of the short-circuit current of polymer/fullerene solar cells10.1063/1.2130396 ↗
58. Temperature and light modulated open-circuit voltage in nonfullerene organic solar cells with different effective bandgaps10.1002/aenm.202003091 ↗
59. On the recombination order of surface recombination under open circuit conditions10.1016/j.orgel.2020.105905 ↗
60. Quantifying the nongeminate recombination dynamics in nonfullerene bulk heterojunction organic solar cells10.1002/aenm.201901438 ↗
61. Self-Healing of proton-irradiated organic photodiodes and photovoltaics
62. Defect dynamics in proton irradiated CH3NH3PbI3 perovskite solar cells10.1002/aelm.201600438 ↗
63. Determination of the electron lifetime in nanocrystalline dye solar cells by open-circuit voltage decay measurements10.1002/cphc.200200615 ↗
64. Characterization of planar lead halide perovskite solar cells by impedance spectroscopy, open-circuit photovoltage decay, and intensity-modulated photovoltage/photocurrent spectroscopy10.1021/jp510837q ↗
65. Highly efficient flexible perovskite solar cells through pentylammonium acetate modification with certified efficiency of 23.35
66. Unraveling device physics of dilute-donor narrow-bandgap organic solar cells with highly transparent active layers
67. On charge carrier density in organic solar cells obtained via capacitance spectroscopy10.1002/aelm.202000517 ↗
68. Trap-assisted recombination in disordered organic semiconductors10.1103/PhysRevLett.107.256805 ↗
69. Capacitance spectroscopy for quantifying recombination losses in nonfullerene small-molecule bulk heterojunction solar cells10.1002/aenm.201502250 ↗
70. Defects in perovskite-halides and their effects in solar cells10.1038/nenergy.2016.149 ↗
71. Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells10.1039/C7EE02415K ↗
72. Radiation hardness of perovskite solar cells based on aluminum-doped zinc oxide electrode under proton irradiation10.1002/solr.201900219 ↗
73. Photo-induced halide redistribution in organic–inorganic perovskite films10.1038/ncomms11683 ↗
74. Defects engineering for high-performance perovskite solar cells10.1038/s41528-018-0035-z ↗
75. Capturing the sun: a review of the challenges and perspectives of perovskite solar cells10.1002/aenm.201700264 ↗
76. The role of chlorine in the formation process of “CH3NH3PbI3-xClx” perovskite10.1002/adfm.201401872 ↗
77. Defects in metal triiodide perovskite materials towards high-performance solar cells: origin, impact, characterization, and engineering10.1039/C7CS00868F ↗
78. Recombination in perovskite solar cells: significance of grain boundaries, interface traps, and defect ions10.1021/acsenergylett.7b00236 ↗
79. Understanding the high performance of over 15% efficiency in single-junction bulk heterojunction organic solar cells10.1002/adma.201903868 ↗
80. Effect of palladium-tetrakis(triphenylphosphine) catalyst traces on charge recombination and extraction in non-fullerene-based organic solar cells10.1002/adfm.202009363 ↗