Long-term stable perovskite solar cells prepared by doctor blade coating technology using bilayer structure and non-toxic solvent
Source abstract
Abstract
The doctor blade coating technology for the perovskite solar cells (PSCs) is studied. The bilayer and triple-layer structures based on CsFAPb(IBr) 3 and MAPbI 3 layers were designed and fabricated by the doctor blade coating. The conventional highly toxic dimethylformamide (DMF) used in the precursors are replaced by the mixtures of gamma-butyrolactone (GBL) and dimethyl sulfoxide (DMSO). Single cation and mixed-cation perovskite layer with different stacks are also compared. It is found that the as-prepared single cation perovskite (MAPbI 3 ) PSCs have better photovoltaic performance but worse lifetime than those of the mixed-cation perovskite (CsFAPb(IBr) 3 ) PSCs. Additionally, the bi-layer structure PSC has a brighter and smoother surface, higher quantum efficiency, and higher crystallinity . Those factors concerning the MAPbI 3/CsFAPb(IBr) 3(upper/lower) solar cell to have superior properties and better lifetime under the elevated temperature and humidity than that of the CsFAPb(IBr) 3/MAPbI 3(upper/lower) solar cell. Moreover, when the MAPbI 3 is used as the capping layer of the CsFAPb(IBr) 3/MAPbI 3 bilayer PCS, its photovoltaic performance is better. Secondary ion mass spectroscopy indicates that MAPbI 3 capping layer has better ability to dissolve the bottom layers than that of CsFAPb(IBr) 3 due to the reduction of inter-diffusion of molecules and smooth surface during lifetime test. Finally, the MAPbI 3/CsFAPb(IBr) 3 bilayer device shows the best initial power conversion efficiency (PCE), Voc, and Jsc of 15.4%, 1.01 V, and 20.7 mA/cm 2 respectively. The encapsulated PSC keeps 92% of original PCE under ambient environment at room temperature and relative humidity of 40% after 1000 h.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Solid-state spectroscopy and crystallography
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Fast wetting of a fullerene capping layer improves the efficiency and scalability of perovskite solar cells10.1021/acsami.0c11164 ↗
2. Scalable fabrication of efficient organolead trihalide perovskite solar cells with doctor-bladed active layers10.1039/C4EE03907F ↗
3. Perovskite solar cells and large area modules (100 cm 2 ) based on an air flow-assisted PbI 2 blade coating deposition process10.1016/j.jpowsour.2014.12.008 ↗
4. Development and challenges of metal halide perovskite solar modules
5. Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency10.1039/C5EE03874J ↗
6. An effective method of predicting perovskite solar cell lifetime–Case study on planar CH 3 NH 3 PbI 3 and HC(NH 2 ) 2 PbI 3 perovskite solar cells and hole transfer materials of spiro-OMeTAD and PTAA10.1016/j.solmat.2016.12.043 ↗
7. Formamidinium lead halide perovskite crystals with unprecedented long carrier dynamics and diffusion length10.1021/acsenergylett.6b00002 ↗
8. Nonlinear absorption and temperature-dependent fluorescence of perovskite FAPbBr3 nanocrystal10.1364/OL.43.000122 ↗
9. How important is the organic part of lead halide perovskite photovoltaic cells? Efficient CsPbBr3 cells10.1021/acs.jpclett.5b00968 ↗
10. Cesium enhances long-term stability of lead bromide perovskite-based solar cells10.1021/acs.jpclett.5b02597 ↗
11. Efficient inorganic–organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
12. Understanding degradation mechanisms and improving stability of perovskite photovoltaics10.1021/acs.chemrev.8b00336 ↗
13. Stability of all-inorganic perovskite solar cells10.1016/j.nanoen.2019.104249 ↗
14. High-pressure single-crystal structures of 3D lead-halide hybrid perovskites and pressure effects on their electronic and optical properties10.1021/acscentsci.6b00055 ↗
15. Exploration of the compositional space for mixed lead halogen perovskites for high efficiency solar cells10.1039/C6EE00030D ↗
16. Br-containing alkyl ammonium salt-enabled scalable fabrication of high-quality perovskite films for efficient and stable perovskite modules10.1039/C9TA09101G ↗
17. Fabrication of perovskite solar cells using novel 2D/3D‐blended perovskite single crystalsInt10.1002/er.6183 ↗
18. Scalable fabrication of high-quality crystalline and stable FAPbI3 thin films by combining doctor-blade coating and the cation exchange reaction10.1039/C8NR10267H ↗
19. Ambient blade coating of mixed cation, mixed halide perovskites without dripping: in situ investigation and highly efficient solar cells10.1039/C9TA12890E ↗
20. Zhong · 2020 · 1
21. Enhanced environmental stability of planar heterojunction perovskite solar cells based on blade-coating10.1002/aenm.201401229 ↗
22. Zwitterion-stabilizing scalable bladed α-phase Cs0.1FA0.9PbI3 films for efficient inverted planar perovskite solar cells10.1021/acssuschemeng.0c00417 ↗
23. Intrinsic thermal instability of methylammonium lead trihalide perovskite10.1002/aenm.201500477 ↗
24. Nonhazardous solvent systems for processing perovskite photovoltaics10.1002/aenm.201600386 ↗
25. Clinical outcomes of occupational exposure to n,n-dimethylformamide: perspectives from experimental toxicology10.5491/SHAW.2011.2.2.97 ↗
26. The effect of temperature and active layer thickness on the performance of CH3NH3PbI3 perovskite solar cell: a numerical simulation approach
27. Carrier transport in CH3NH3PbI3Films with different thickness for perovskite solar cells10.1002/admi.201600327 ↗
28. Unraveling the passivation process of PbI2 to enhance the efficiency of planar perovskite solar cells10.1021/acs.jpcc.8b08075 ↗
29. Large-grained perovskite films via FA x MA 1−x Pb(I x Br 1−x ) 3 single crystal precursor for efficient solar cells10.1016/j.nanoen.2017.02.034 ↗
30. Efficient ambient-air-stable solar cells with 2D–3D heterostructured butylammonium-caesium-formamidinium lead halide perovskites10.1038/nenergy.2017.135 ↗
31. Efficient and stable CsPbI3 solar cells via regulating lattice distortion with surface organic terminal groups10.1002/adma.201900605 ↗
32. Boosting optoelectronic performance of MAPbI3 perovskite solar cells via ethylammonium chloride additive engineering10.1007/s40843-020-1383-3 ↗
33. Encapsulation of organic and perovskite solar cells: a review10.3390/coatings9020065 ↗
34. Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers10.1126/science.aah4046 ↗
35. Enhanced efficiency and stability of quasi-2D/3D perovskite solar cells by thermal assisted blade coating method10.1016/j.cej.2020.126992 ↗
36. High-performance and moisture-stable perovskite solar cells with a 2D modified layer via introducing a high dipole moment cation10.1039/C9TC05227E ↗
37. Light and oxygen induced degradation limits the operational stability of methylammonium lead triiodide perovskite solar cells10.1039/C6EE00409A ↗
38. Poly (4‐Vinylpyridine)‐Based interfacial passivation to enhance voltage and moisture stability of lead halide perovskite solar cells10.1002/cssc.201700271 ↗
39. Effect of Cs+ fraction on photovoltaic performance of perovskite solar cells based on CsxMA1−xPbI3 absorption layers10.1007/s11664-020-08484-1 ↗
40. Stable cesium-rich formamidinium/cesium pure-iodide perovskites for efficient photovoltaics10.1021/acsenergylett.1c01013 ↗
41. Efficient dual cathode interfacial layer for high performance organic and perovskite solar cells10.1016/j.orgel.2018.09.034 ↗
42. Substituting Cs for MA on the surface of MAPbI3 perovskite: a first-principles study10.1016/j.commatsci.2018.04.042 ↗
43. A simple engineering strategy with side chain liquid crystal polymers in perovskite absorbers for high efficiency and stability10.1016/j.orgel.2020.105987 ↗
44. Efficient fully blade-coated perovskite solar cells in air with nanometer-thick bathocuproine buffer layer10.1007/s12274-020-3147-4 ↗
45. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗