Improving photovoltaic performance of inverted planar structure perovskite solar cells via introducing photogenerated dipoles in the electron transport layer
Source abstract
Abstract
Abstract Organic-inorganic hybrid perovskites have attracted great attentions for photovoltaic applications due to impressive energy conversion efficiency and low cost fabrication. This article reports the effect of photogenerated dipoles in the electron transport layer (ETL) on the photovoltaic actions in perovskite solar cells (PSCs). A nonfullerene material ITIC with optically induced dipoles was doped into PCBM acting as ETL in inverted planar structure PSCs (ITO/PEDOT:PSS/MAPbI3-xClx/ETL/PEI/Ag). The power conversion efficiency (PCE) of PSCs increases from 13.48% to 14.52% with introducing ITIC into ETL. The capacitance measurements indicate that optically induced dipoles can decrease interfacial charge accumulation. Furthermore, impedance spectroscopy suggests the charge recombination as well as ionic migration are reduced with ITIC doped ETL. Steady and transient PL spectra reveal that the electron extraction is more efficient with optically induced dipoles in the ETL. These results provide unique design of ETL in perovskite solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
2. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell10.1021/jz400892a ↗
3. Perovskite solar cells: the birth of a new era in photovoltaics10.1021/acsenergylett.7b00137 ↗
4. Iodide management in formamidinium-lead-halide – based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
5. Methodologies toward highly efficient perovskite solar cells10.1002/smll.201704177 ↗
6. Synergistic effect of PbI 2 passivation and chlorine inclusion yielding high open-circuit voltage exceeding 1.15 V in both mesoscopic and inverted planar CH3NH 3 PbI 3 (Cl)-Based perovskite solar cells10.1002/adfm.201603968 ↗
7. Recent progress in flexible perovskite solar cells: materials, mechanical tolerance and stability10.1016/j.rser.2017.10.028 ↗
8. Hysteresis-suppressed high-efficiency flexible perovskite solar cells using solid-state ionic-liquids for effective electron transport10.1002/adma.201600446 ↗
9. 2D homologous perovskites as light-absorbing materials for solar cell applications10.1021/jacs.5b03796 ↗
10. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
11. Transparent conductive oxide-free perovskite solar cells with PEDOT: PSS as transparent electrode10.1021/acsami.5b03171 ↗
12. Revealing underlying processes involved in light soaking effects and hysteresis phenomena in perovskite solar cells10.1002/aenm.201500279 ↗
13. Perovskite–fullerene hybrid materials suppress hysteresis in planar diodes10.1038/ncomms8081 ↗
14. Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells10.1038/ncomms6784 ↗
15. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗
16. Effect of photogenerated dipoles in the hole transport layer on photovoltaic performance of organic-inorganic perovskite solar cells10.1002/aenm.201601575 ↗
17. Inverted polymer solar cells integrated with a low-temperature-annealed sol-gel-derived ZnO film as an electron transport layer10.1002/adma.201004301 ↗
18. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
19. Effect of ferroelectricity on charge conduction in a PCBM/perovskite device structure10.1016/j.orgel.2017.11.009 ↗
20. Energy level and thickness control on PEDOT: PSS layer for efficient planar heterojunction perovskite cells
21. The Renaissance of fullerenes with perovskite solar cells10.1016/j.nanoen.2017.09.016 ↗
22. Exploring anomalous polarization dynamics in organometallic halide perovskites10.1002/adma.201705298 ↗
23. Photoinduced bulk polarization and its effects on photovoltaic actions in perovskite solar cells10.1021/acsnano.7b06413 ↗
24. Dynamic coupling between electrode interface and donor/acceptor interface via charge dissociation in organic solar cells at device-operating condition10.1021/acs.jpcc.5b00082 ↗
25. Simultaneously enhancing dissociation and suppressing recombination in perovskite solar cells10.1016/j.nanoen.2017.04.031 ↗
26. Kinetics of ion transport in perovskite active layers and its implications for active layer stability10.1021/jacs.5b08535 ↗
27. Efficient flexible solar cell based on composition-tailored hybrid perovskite10.1002/adma.201605900 ↗
28. Sensitive X-ray detectors made of methylammonium lead tribromide perovskite single crystals10.1038/nphoton.2016.41 ↗
29. The identification and characterization of defect states in hybrid organic–inorganic perovskite photovoltaics10.1039/C4CP04479G ↗
30. Simultaneous measurement of Carrier density and mobility of organic semiconductors using capacitance techniques10.1016/j.orgel.2011.08.002 ↗
31. Graded donor-acceptor heterojunctions for efficient organic photovoltaic cells10.1002/adma.201002454 ↗
32. Improved performance of photomultiplication polymer photodetectors by adjustment of P3HT molecular arrangement
33. New interfacial materials for rapid hole-extraction in organic photovoltaic cells10.1039/c3ta00808h ↗