High performance inverted perovskite solar cells using PEDOT:PSS/KCl hybrid hole transporting layer
Source abstract
Abstract
Abstract PEDOT:PSS is one of the most widely used hole transporting layer for inverted perovskite solar cells. Yet the performances of the corresponding perovskite solar cells are not satisfactory. Here, we demonstrate that KCl modified PEDOT:PSS film can promote the crystallization of perovskite film and enlarge the perovskite crystals. At the same time, KCl can diffuse into the perovskite film and effectively passivate the defects. As a result, inverted perovskite solar cells fabricated on 10 mg mL−1 PEDOT:PSS/KCl films exhibit an average power conversion efficiency of 16.24 %, which is enhanced by 17.77 % compared with the reference perovskite solar cells. Open circuit voltage of 1.009 V and power conversion efficiency of 17.09 % have also been demonstrated using the optimized 10 mg mL−1 PEDOT:PSS/KCl films.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Advanced Battery Materials and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Best Research Cell Efficiency Chart. https://www.nrel.gov/pv/cell-efficiency.html.
2. Recent progress of inverted perovskite solar cells with a modified PEDOT:PSS hole transport layer10.1021/acsami.0c13576 ↗
3. A sodium citrate-modified-PEDOT:PSS hole transporting layer for performance enhancement in inverted planar perovskite solar cells10.1039/C8TC06043F ↗
4. Induced crystallization of perovskites by a perylene underlayer for high-performance solar cells10.1021/acsnano.6b01904 ↗
5. Inverted planar perovskite solar cells based on CsI-doped PEDOT:PSS with efficiency beyond 20% and small energy loss10.1039/C9TA08995K ↗
6. Facile phthalocyanine doping into PEDOT leads to highly efficient and stable inverted metal halide perovskite solar cells10.1039/C8TA03541E ↗
7. Inverted planar perovskite solar cells with a high fill factor and negligible hysteresis by the dual effect of NaCl-doped PEDOT:PSS10.1021/acsami.7b14592 ↗
8. High open-circuit voltage of 1.134 V for inverted planar perovskite solar cells with sodium citrate-doped PEDOT:PSS as a hole transport layer10.1021/acsami.9b06526 ↗
9. Critical roles of potassium in charge-carrier balance and diffusion induced defect passivation for efficient inverted perovskite solar cells10.1039/C8TA11782A ↗
10. High efficiency (18.53%) of flexible perovskite solar cells via the insertion of potassium chloride between SnO2 and CH3NH3PbI3 layers10.1021/acsaem.9b00391 ↗
11. Boosting the performance of perovskite solar cells through a novel active passivation method10.1039/C8TA05593A ↗
12. Alkali chlorides for the suppression of the interfacial recombination in inverted planar perovskite solar cells10.1002/aenm.201970068 ↗
13. Simultaneous contact and grain‐boundary passivation in planar perovskite solar cells using SnO2 -KCl composite electron transport layer
14. Alkali chloride doped SnO2 electron-transporting layers for boosting charge transfer and passivating defects in all-inorganic CsPbBr3 perovskite solar cells10.1039/D1TA02672K ↗
15. Evaporated potassium chloride for double-sided interfacial passivation in inverted planar perovskite solar cells10.1016/j.jechem.2020.06.019 ↗
16. Exploring inorganic binary alkaline halide to passivate defects in low‐temperature‐processed planar‐structure hybrid perovskite solar cells10.1002/aenm.201800138 ↗
17. Passivation of bulk and interface defects in sputtered-NiOx-based planar perovskite solar cells: a facile interfacial engineering strategy with alkali metal halide salts10.1021/acsaem.1c00032 ↗
18. Shallow and deep trap state passivation for low-temperature processed perovskite solar cells10.1021/acsenergylett.0c00596 ↗
19. Simultaneous contact and grain‐boundary passivation in planar perovskite solar cells using SnO2‐KCl composite electron transport layer
20. Boost the performance of inverted perovskite solar cells with PEDOT:PSS/Graphene quantum dots composite hole transporting layer10.1016/j.orgel.2019.105575 ↗
21. Enhance the performance and stability of methylammonium lead iodide perovskite solar cells with guanidinium thiocyanate additive10.1016/j.cap.2018.10.020 ↗
22. Finally, inkjet-printed metal halide perovskite LEDs -utilizing seed crystal templating of salty PEDOT:PSS10.1039/D0MH00512F ↗
23. Universal passivation strategy to slot-die printed SnO2 for hysteresis-free efficient flexible perovskite solar module10.1038/s41467-018-07099-9 ↗
24. Ionic transport in hybrid lead iodide perovskite solar cells10.1038/ncomms8497 ↗
25. Photovoltaic switching mechanism in lateral structure hybrid perovskite solar cells10.1002/aenm.201500615 ↗
26. Optical-electrical-chemical engineering of PEDOT:PSS by incorporation of hydrophobic nafion for efficient and stable perovskite solar cells10.1021/acsami.7b19053 ↗
27. Carbon nanotubes embedded poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) hybrid hole collector for inverted planar perovskite solar cells10.1016/j.jpowsour.2019.226765 ↗
28. PSS composite layer: a route to suppressed hysteresis and enhanced open-circuit voltage in a planar perovskite solar cell10.1021/acsami.8b05949 ↗
29. Interfacial structure and composition managements for high‐performance methylammonium‐free perovskite solar cells10.1002/adfm.202005846 ↗
30. 2D perovskite seeding layer for efficient air‐processable and stable planar perovskite solar cells10.1002/adfm.202003081 ↗
31. Bipolar organic material assisted surface and boundary defects passivation for highly efficient MAPbI3-based inverted perovskite solar cells10.1002/solr.202000369 ↗
32. Reduced bilateral recombination by functional molecular interface engineering for efficient inverted perovskite solar cells10.1016/j.nanoen.2020.105249 ↗
33. Dopant‐Free, amorphous–crystalline heterophase SnO2 electron transport bilayer enables >20% efficiency in triple‐cation perovskite solar cells
34. KF-Doped SnO2 as an electron transport layer for efficient inorganic CsPbI2Br perovskite solar cells with enhanced open-circuit voltages10.1039/D1TC00277E ↗
35. Enhancing the efficiency of low-temperature planar perovskite solar cells by modifying the interface between perovskite and hole transport layer with polymers10.1016/j.electacta.2017.12.135 ↗