Silver-nanowire-based lamination electrode for a fully vacuum-free and solution-processed organic photovoltaic cell
Source abstract
Abstract
Abstract A silver nanowire (AgNW)-based stacked lamination electrode was investigated for application as the top electrode in fully vacuum-free and solution-processed organic photovoltaic (OPV) fabrication. AgNW layers were stacked with an ethylene-glycol-doped poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) layer for conductivity enhancement and uniform contact creation, and an ethylene vinyl acetate (EVA) adhesive and a polyethylene terephthalate (PET) supporting film with subsequent hot-pressing were used for complete attachment (good electrical contact). During hot-pressing at 100 °C, the melted EVA adhesive was found to create a concrete electrical contact between the lamination electrode and the underlying polymer semiconducting layer. To verify the performance of the lamination electrode, fully vacuum-free and solution-processed OPVs with the lamination electrode were fabricated and compared to OPVs with a reference evaporated metal electrode. The results revealed that the OPVs with lamination electrodes provided the best fill factor (FF) of 53% and a final photoconversion efficiency (PCE) of 2.61%, whereas the OPVs with metal electrodes provided the best FF of 64% and a PCE of 3.41%. Analytical calculations indicate that the FF loss of lamination electrode OPVs was due to higher series resistance (11.4 Ω-cm2 vs. 15.1 Ω-cm2) and higher recombination at the interface, which can be considered an ideality factor (1.7 vs. 2.7).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Development of a simple analytical model to quantify the PV module cost premium associated with module efficiency and cell technology10.1016/j.rser.2014.05.027 ↗
2. Dye-sensitized solar cells10.1016/S1389-5567(03)00026-1 ↗
3. Empowering semi-transparent solar cells with thermal-mirror functionality10.1002/aenm.201502466 ↗
4. Efficient thin-film organic solar cells based on pentacene/C 60 heterojunctions10.1063/1.1829777 ↗
5. Gravure printing inverted organic solar cells: the influence of ink properties on film quality and device performance10.1016/j.solmat.2012.04.025 ↗
6. Fabrication of spray-coated semitransparent organic solar cells10.1109/JEDS.2019.2949685 ↗
7. Bulk-heterojunction organic solar cells: five core technologies for their commercialization10.1002/adma.201601197 ↗
8. “Fully slot–die-coated all-organic solar cells10.1002/ente.201402153 ↗
9. Failure analysis in ITO-free all-solution processed organic solar cells10.1039/C5TA04463D ↗
10. Fully-solution-processed organic solar cells with a highly efficient paper-based light trapping element10.1039/C5TA07154B ↗
11. Laminated fabrication of polymeric photovoltaic diodes10.1038/26183 ↗
12. Asymmetric photocurrent extraction in semitransparent laminated flexible organic solar cells10.1038/s41528-017-0017-6 ↗
13. Semitransparent all-polymer solar cells through lamination10.1039/C8TA07992G ↗
14. A semi-transparent plastic solar cell fabricated by a lamination process10.1002/adma.200701101 ↗
15. High-performance polymer photovoltaic devices with inverted structure prepared by thermal lamination10.1016/j.solmat.2009.05.017 ↗
16. Conducting polymer as transparent electric glue10.1002/adma.200502475 ↗
17. Viscous conductive glue layer in semitransparent polymer-based solar cells fabricated by a lamination process10.1021/am402698x ↗
18. Organic and perovskite solar modules innovated by adhesive top electrode and depth-resolved laser patterning10.1039/C6EE01555G ↗
19. ITO-free laminated concept for flexible organic solar cells10.1016/j.solmat.2013.09.024 ↗
20. Air-processed organic photovoltaic devices fabricated with hot press lamination10.1016/j.orgel.2010.10.008 ↗
21. Efficient transparent small-molecule organic light-emitting devices adopting laminated transparent top electrodes10.1016/j.orgel.2015.10.003 ↗
22. Investigation of the effects of doping and post-deposition treatments on the conductivity, morphology, and work function of poly(3,4- ethylenedioxythiophene)/poly(styrene sulfonate) films10.1002/adfm.200400073 ↗
23. Efficient large-area transparent OLEDs based on a laminated top electrode with an embedded Auxiliary mesh10.1021/acsphotonics.6b00942 ↗
24. “Influence of the work function of chemically modified indium–tin–oxide electrodes on the open-circuit voltage of heterojunction photovoltaic cells10.1246/cl.2008.778 ↗
25. Generating semi-metallic conductivity in polymers by laser-driven nanostructural reorganization10.1039/C9MH00959K ↗
26. Performance improvement of inverted polymer solar cells with different top electrodes by introducing a MoO3 buffer layer10.1063/1.3026741 ↗
27. Scalability of multi-junction organic solar cells for large area organic solar modules10.1063/1.4921771 ↗
28. Green · 1982
29. Effect of carbon containing SiNx antireflection coating on the screen-printed contact and low illumination performance of silicon solar cell10.1002/pip.1184 ↗