1D/2A ternary blend active layer enables as-cast polymer solar cells with higher efficiency, better thickness tolerance, and higher thermal stability
Source abstract
Abstract
Abstract Recently ternary polymer solar cells (PSCs) have shown big potential to enhance the photovoltaic performance, however, the relevant systematic studies based on thick-film active layers are extremely scarce and have not been well elucidated. Herein, as-cast 1D/2A thick-film ternary active layers based on highly crystalline polymer PBODT as the donor and PC71BM plus non-fullerene ITIC as the acceptors were investigated, with full comparison to PBODT:PC71BM and PBODT:ITIC blends, the two binary systems. It was found that PBODT:ITIC binary PSCs showed very poor thickness tolerance, whose power conversion efficiencies (PCEs) dropped sharply from 6.45% for 100 nm thick active layer to 4.44% and 2.58% for 200 and 300 nm thick active layers, respectively. Relatively, PBODT:PC71BM binary PSCs could display much better thick-film performances, with a 5.14% PCE at 110 nm and a maximum PCE of 7.55% at 300 nm. For the as-cast PBODT:PC71BM:ITIC (1:1.2:0.3 by weight) ternary PSCs, the PCE for 300 nm thick active layer could be further elevated to 8.42%. Interestingly, notable thickness tolerance was also achieved for the ternary PSCs, whose PCEs ≥7.22% could be maintained for thickness range from 110 to 520 nm. Based on AFM and TEM analyses, the PBODT:PC71BM:ITIC ternary blend film could show good surface and bulk-heterojunction morphologies. Relative to the two binary active layers, the ternary active layer could contribute higher short-circuit current due to improved photo-response and suppressed carrier recombination. Furthermore, the thermal stability of the as-cast ternary solar cells was quite better than those of binary solar cells. The simultaneous improvements of efficiency, thickness tolerance, and thermal stability via ternary blends in this work suggest that ternary polymer solar cells would be very promising in future.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Conjugated polymer-based organic solar cells10.1021/cr050149z ↗
2. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
3. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
4. Polymer-fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
5. "Plastic" solar sells: self-assembly of bulk heterojunction nanomaterials by spontaneous phase separation10.1021/ar900065j ↗
6. Business, market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
7. Cost analysis of roll-to-roll fabricated ITO free single and tandem organic solar modules based on data from manufacture10.1039/C4EE01222D ↗
8. Low band-gap conjugated polymers with strong interchain aggregation and very high hole mobility towards highly efficient thick-film polymer solar cells10.1002/adma.201305092 ↗
9. A novel naphtho[1,2-c:5,6-c']bis([1,2,5]thiadiazole)-based narrow-bandgap pi-conjugated polymer with power conversion efficiency over 1010.1002/adma.201603178 ↗
10. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
11. Using o-chlorobenzaldehyde as a fast removable solvent additive during spin-coating PTB7-based active layers: high efficiency thick-film polymer solar cells
12. Low band gap conjugated polymers combining siloxane-terminated side chains and alkyl side chains: side-chain engineering achieving a large active layer processing window for PCE > 10% in polymer solar cells10.1039/C7TA05583H ↗
13. Status and prospects for ternary organic photovoltaics10.1038/nphoton.2015.128 ↗
14. Designing ternary blend bulk heterojunction solar cells with reduced Carrier recombination and a fill factor of 77%10.1038/nenergy.2016.118 ↗
15. Morphology of all-polymer solar cells10.1039/c2ee03071c ↗
16. Ternary-blend polymer solar cells combining fullerene and nonfullerene acceptors to synergistically boost the photovoltaic performance10.1002/adma.201603588 ↗
17. Efficient ternary non-fullerene polymer solar cells with PCE of 11.92% and FF of 76.5%10.1039/C8EE00215K ↗
18. Efficient ternary polymer solar cells with two well-compatible donors and one ultranarrow bandgap nonfullerene acceptor10.1002/aenm.201702854 ↗
19. All-polymer solar cells based on absorption-complementary polymer donor and acceptor with high power conversion efficiency of 8.27%10.1002/adma.201504629 ↗
20. Enhanced photovoltaic performance of ternary polymer solar cells by incorporation of a narrow-bandgap nonfullerene acceptor10.1021/acs.chemmater.7b02228 ↗
21. Highly efficient parallel-like ternary organic solar cells10.1021/acs.chemmater.6b05194 ↗
22. 11% Efficient ternary organic solar cells with high composition tolerance via integrated near-IR sensitization and interface engineering10.1002/adma.201602834 ↗
23. High-performance ternary blend all-polymer solar cells with complementary absorption bands from visible to near-infrared wavelengths10.1039/C5EE03460D ↗
24. Improved performance of ternary polymer solar cells based on a nonfullerene electron cascade acceptor10.1002/aenm.201602127 ↗
25. Ternary-blend polymer solar cells combining fullerene and nonfullerene acceptors to synergistically boost the photovoltaic performance10.1002/adma.201603588 ↗
26. Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%10.1039/C6EE02851A ↗
27. From alloy-like to cascade blended structure: designing high-performance all-small-molecule ternary solar cells10.1021/jacs.7b13054 ↗
28. Ternary system with controlled structure: a new strategy toward efficient organic photovoltaics10.1002/adma.201705243 ↗
29. Layer-by-layer-processed ternary organic solar cells using perylene bisimide as a morphology-inducing component10.1021/acsami.7b01427 ↗
30. Panchromatic sequentially cast ternary polymer solar cells10.1002/adma.201604603 ↗
31. Utilizing energy transfer in binary and ternary bulk heterojunction organic solar cells10.1021/acsami.6b05474 ↗
32. An obvious improvement in the performance of ternary organic solar cells with "guest" donor present at the "host" donor/acceptor interface10.1021/acsami.6b07612 ↗
33. Ternary organic solar cells offer 14% power conversion efficiency10.1016/j.scib.2017.11.003 ↗
34. Highly efficient ternary polymer solar cells by optimizing photon harvesting and charge Carrier transport10.1016/j.nanoen.2016.02.032 ↗
35. Nematic liquid crystal materials as a morphology regulator for ternary small molecule solar cells with power conversion efficiency exceeding 10%10.1039/C7TA00211D ↗
36. Ternary nonfullerene polymer solar cells with a power conversion efficiency of 11.6% by inheriting the advantages of binary cells10.1021/acsenergylett.8b00100 ↗
37. Enhancing performance of large-area organic solar cells with thick film via ternary strategy10.1002/smll.201700388 ↗
38. High-performance ternary organic solar cell enabled by a thick active layer containing a liquid crystalline small molecule donor10.1021/jacs.6b11991 ↗
39. High-performance ternary organic solar cells with thick active layer exceeding 11% efficiency10.1039/C6EE03599J ↗
40. Reducing the effciency-stability-cost gap of organic photovoltaics with highly effcient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
41. A highly crystalline wide-band-gap conjugated polymer toward high-performance as-cast nonfullerene polymer solar cells10.1021/acsami.7b10059 ↗
42. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
43. Side-chain isomerization on an n-type organic semiconductor ITIC acceptor makes 11.77% high efficiency polymer solar cells10.1021/jacs.6b09110 ↗
44. Molecular optimization enables over 13% efficiency in organic solar cells10.1021/jacs.7b02677 ↗