journal article·2020-12

Green poly-lysine as electron-extraction modified layer with over 15% power conversion efficiency and its application in bio-based flexible organic solar cells

Kai-Ting Huang, Chih-Ping Chen, Bing-Huang Jiang, Ru-Jong Jeng, Wen-Chang Chen

Publisher page

Abstract

Abstract In this study, we first revealed a green material-Poly-lysine as an interfacial layer (IFL) of electron-extraction layer (EEL) and investigated evolution of morphologies of the active layers in organic photovoltaics (OPVs). The surface structure of the active layers was characterized by atomic force microscopy (AFM) and the molecular packing features were revealed by grazing-incidence wide-angle X-ray scattering (GIWAXS). By embedding poly-lysine as IFL, we evidenced the changes of the blend film phase segregation and observed an increase order of molecular packing in preferential face-on orientation. The optimized blend film morphology facilitated the carrier extraction, thereby significantly improved the OPV performance with the best power conversion efficiency (PCE) of 12.5% and 15.3% for the PBDB-T-2Cl:IT-4F and PBDB-T-2F:Y6 blends, respectively. Compared with the controlled devices, the poly-lysine-modified devices showed significantly improved thermal-and photo-stability which keeps 80% of its initial efficiency after 400-h heating and illumination. As the first discovery of its general applicability of the promising IFL material, poly-lysine was further applied to fabricate a flexible OPV device using 100% bio-based polyethylene furandicarboxylate (PEF) substrate and its derived OPV device exhibited a PCE greater than 7% and maintained the 80% efficiency under the high bending radius of 3 mm. The present study suggests the potential application of using bio-based materials for flexible OPV applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. Reducing the efficiency-stability-cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
2. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
3. 16.7%-efficiency ternary blended organic photovoltaic cells with PCBM as the acceptor additive to increase the open-circuit voltage and phase purity10.1039/C9TA06929A ↗
4. 17% efficiency organic photovoltaic cell with superior processability10.1093/nsr/nwz200 ↗
5. Interfacial layer engineering for performance enhancement in polymer solar cells10.3390/polym7020333 ↗
6. Alcohol-soluble cross-linked poly(nBA)n-b-poly(NVTri)m block copolymer and its applications in organic photovoltaic cells for improved stability10.1021/acsami.8b17169 ↗
7. Synthesis of triazole-based amphiphilic block copolymers containing carbazole moiety by raft polymerization10.1002/macp.201200176 ↗
8. Synthesis of 1,2,4-triazolium salt-based polymers and block copolymers by raft polymerization: Ion conductivity and assembled structures10.1016/j.polymer.2016.04.062 ↗
9. Design of new n-type porphyrin acceptors with subtle side-chain engineering for efficient nonfullerene solar cells with low energy loss and optoelectronic response covering the near-infrared region10.1021/acsami.9b15975 ↗
10. Synthesis and characterization of new asymmetric thieno[3,4-b]pyrazine-based D-π-A-A type small molecular donors with near-infrared absorption and their photovoltaic applications10.1016/j.orgel.2019.02.013 ↗
11. Sol-gel-deposited ZnO thin films: a review10.1016/j.mseb.2010.07.001 ↗
12. Interlayer modification using eco-friendly glucose-based natural polymers in polymer solar cells10.1021/acssuschemeng.8b03219 ↗
13. Influence of the ionic functionalities of polyfluorene derivatives as a cathode interfacial layer on inverted polymer solar cells10.1021/am500708k ↗
14. Recent progress and perspective in solution-processed interfacial materials for efficient and stable polymer and organometal perovskite solar cells10.1039/C4EE03824J ↗
15. Polystyrene-block-poly(ionic liquid) copolymers as work function modifiers in inverted organic photovoltaic cells10.1021/acsami.7b17635 ↗
16. Simple structured polyetheramines, jeffamines, as efficient cathode interfacial layers for organic photovoltaics providing power conversion efficiencies up to 9.1%10.1039/C7TA02954C ↗
17. A highly sensitive biodegradable pressure sensor based on nanofibrous dielectric10.1016/j.sna.2019.05.021 ↗
18. Biodegradable electronics: Cornerstone for sustainable electronics and transient applications10.1039/C6TC00678G ↗
19. Exotic materials for bio-organic electronics10.1039/C0JM02444A ↗
20. Fabrication of flexible dye sensitized solar cells on plastic substrates10.1016/j.nanoen.2012.10.004 ↗
21. High-performance biodegradable/transient electronics on biodegradable polymers10.1002/adma.201306050 ↗
22. Realization of intrinsically stretchable organic solar cells enabled by charge-extraction layer and photoactive material engineering10.1021/acsami.8b04582 ↗
23. Bio-based transparent conductive film consisting of polyethylene furanoate and silver nanowires for flexible optoelectronic devices10.1002/marc.201800271 ↗
24. Replacing fossil based PET with biobased PEF; process analysis, energy and ghg balance10.1039/c2ee02480b ↗
25. Oxygen sorption and transport in amorphous poly(ethylene furanoate)10.1016/j.polymer.2014.07.041 ↗
26. Enzymatic hydrolysis of poly(ethylene furanoate)10.1016/j.jbiotec.2016.02.006 ↗
27. Bottle-grade polyethylene furanoate from ring-opening polymerisation of cyclic oligomers10.1038/s41467-018-05147-y ↗
28. The green poly-lysine enantiomers as electron-extraction layers for high performance organic photovoltaics10.1039/C9TC03895G ↗
29. Antineoplastic activity of poly(L-lysine) with some ascites tumor cells10.1073/pnas.76.7.3246 ↗
30. Poly(L-lysine) and poly(D-lysine) conjugates of methotrexate: Different inhibitory effect on drug resistant cells10.1016/S0026-895X(25)13791-7 ↗
31. Enhancement of the performance of InAs quantum dots solar cell by surface modification using poly-L-lysine homopolymers10.1063/1.4789908 ↗
32. Ultra-low work function transparent electrodes achieved by naturally occurring biomaterials for organic optoelectronic devices10.1002/admi.201400215 ↗
33. Relationship between photostability and nanostructures in DTS(FBTTh2)2:fullerene bulk-heterojunction films10.1016/j.solmat.2016.02.011 ↗
34. Progress in understanding degradation mechanisms and improving stability in organic photovoltaics10.1002/adma.201603940 ↗
35. Effect of solvent additives on bulk heterojunction morphology of organic photovoltaics and their impact on device performance10.1002/polb.23802 ↗
36. Structural and morphological effects of alkyl side chains on flanking thiophenes of diketopyrrolopyrrole polymers for organic photovoltaic devices10.1016/j.polymer.2016.07.066 ↗
37. Understanding the morphology of solution processed fullerene-free small molecule bulk heterojunction blends10.1039/C6CP01269H ↗
38. Controlling the morphology of the active layer by using additives and its effect on bulk hetero-junction solar cell performance10.1007/s11814-015-0162-3 ↗
39. Fullerene adducts bearing cyano moiety for both high dielectric constant and good active layer morphology of organic photovoltaics10.1002/adfm.201600350 ↗
40. Importance of solvent removal rate on the morphology and device performance of organic photovoltaics with solvent annealing10.1021/acsami.7b00781 ↗
41. Morphological study of an intrinsically stretchable photovoltaic bulk heterojunction10.1002/polb.24597 ↗
42. Low-bandgap copolymers consisting of 2,1,3-benzoselenadiazole and carbazole derivatives with thiophene or selenophene π-bridges10.1016/j.polymer.2014.05.055 ↗
43. Correlating photovoltaic properties of a PTB7-th:PC71BM blend to photophysics and microstructure as a function of thermal annealing10.1039/C7TA03144K ↗
44. Enhanced photovoltaic performance of amorphous donor-acceptor copolymers based on fluorine-substituted benzodioxocyclohexene-annelated thiophene10.1002/aenm.201702506 ↗
45. Functionalized alkenyl side chains: a feasible strategy in improving charge transport and photovoltaic performance10.1039/C9TC06038C ↗
46. Production of bio-based 2,5-furan dicarboxylate polyesters: Recent progress and critical aspects in their synthesis and thermal properties10.1016/j.eurpolymj.2016.08.004 ↗
47. Putting carbon dioxide to work10.1038/531180a ↗
48. Influence of ZnO sol-gel electron transport layer processing on BHJ active layer morphology and OPV performance10.1016/j.solmat.2014.02.014 ↗
49. Highly efficient inverted organic photovoltaics containing aliphatic hyperbranched polymers as cathode modified layers10.1021/acs.macromol.6b01373 ↗
50. Investigation of conjugated polymers based on naphtho[2,3-c]thiophene-4,9-dione in fullerene-based and fullerene-free polymer solar cells10.1021/acs.macromol.6b02733 ↗
51. Ternary organic photovoltaics prepared by sequential deposition of single donor and binary acceptors10.1021/acsami.8b07199 ↗
52. Efficient approach for improving the performance of nonhalogenated green solvent-processed polymer solar cells via ternary-blend strategy10.1021/acsami.7b19548 ↗
53. Nanomorphology in A-D-A type small molecular acceptors-based bulk heterojunction polymer solar cells10.1016/j.jechem.2018.11.001 ↗
54. Regulating the vertical phase distribution by fullerene-derivative in high performance ternary organic solar cells10.1016/j.nanoen.2018.01.040 ↗
55. A high dielectric constant non-fullerene acceptor for efficient bulk-heterojunction organic solar cells10.1039/C7TA10136H ↗
56. Hidden structure ordering along backbone of fused-ring electron acceptors enhanced by ternary bulk heterojunction10.1002/adma.201802888 ↗
57. Ternary non-fullerene polymer solar cells with 13.51% efficiency and a record-high fill factor of 78.13%10.1039/C8EE01564C ↗
58. Blade-cast nonfullerene organic solar cells in air with excellent morphology, effciency, and stability
59. Thermally stable all-polymer solar cells with high tolerance on blend ratios
60. A green route to a novel hyperbranched electrolyte interlayer for nonfullerene polymer solar cells with over 11% efficiency10.1039/C7CC08604K ↗
61. A universal method to produce low-work function electrodes for organic electronics10.1126/science.1218829 ↗
62. Solution-processed cathode interfacial layer materials for high-efficiency polymer solar cells, Mater
63. Interfacial materials for organic solar cells: Recent advances and perspectives10.1002/advs.201500362 ↗
64. Enhanced photovoltaic performance of CH3NH3PbI3 perovskite solar cells through interfacial engineering using self-assembling monolayer10.1021/ja512518r ↗
65. Over 14% effciency in polymer solar cells enabled by a chlorinated polymer donor
66. Potassium-presenting zinc oxide surfaces induce vertical phase separation in fullerene-free organic photovoltaics
67. Improving performance of nonfullerene organic solar cells over 13% by employing silver nanowires-doped PEDOT:PSS composite interface10.1021/acsami.9b16404 ↗
68. Random polymer donor for high-performance polymer solar cells with efficiency over 14%10.1021/acsami.9b14133 ↗
69. Flexible PEDOT:PSS/ITO hybrid transparent conducting electrode for organic photovoltaics10.1016/j.solmat.2013.03.028 ↗
70. Durable ultraflexible organic photovoltaics with novel metal-oxide-free cathode10.1002/adfm.201808378 ↗
71. Highly efficient flexible organic photovoltaics using quasi-amorphous ZnO/Ag/ZnO transparent electrodes for indoor applications10.1016/j.jpowsour.2019.02.015 ↗
72. Fully solution processed, stable, and flexible bifacial polymer solar cells10.1109/JPHOTOV.2019.2957654 ↗
73. High performance flexible transparent electrode via one-step multifunctional treatment for Ag nanonetwork composites semi-embedded in low-temperature-processed substrate for highly performed organic photovoltaics
74. Photostability of organic materials used in polymer solar cells10.1002/pi.4656 ↗
75. Effects of backbone planarity and tightly packed alkyl chains in the donor-acceptor polymers for high photostability10.1021/acs.macromol.6b01580 ↗
76. Photostability of plasma polymerized γ-terpinene thin films for encapsulation of OPV10.1038/srep45599 ↗
77. The role of fullerenes in the environmental stability of polymer:fullerene solar cells10.1039/C7EE02983G ↗
78. High stability of benzotriazole and benzodithiophene containing medium band-gap polymer solar cell10.1016/j.solmat.2017.09.024 ↗