journal article·2022-07

Alkyl ammonium salt with different chain length for high-efficiency and good-stability 2D/3D hybrid perovskite solar cells

Xiaofang Ye, Hongkun Cai, Qinghe Sun, Tie Xu, Jian Ni, Juan Li, Jianjun Zhang

Organic Electronics· Volume 106
Publisher page

Abstract

Recently, 2D/3D halide perovskites solar cells (PSCs) attract extensive attention due to simultaneous improved efficiency and stability. However, the types of alkyl ammonium salts, including the type of functional groups, the number of carbon atoms in the hydrocarbon chain, as well as the arrangement and distribution of the molecular structure, have a great impact on the performance and stability of films and devices. Herein, we compare the passivation capacity and moisture resistance of 2D capping layer based on three structurally similar alkyl ammonium salts (Butyl Ammonium Iodide (BAI), Propyl Ammonium Iodide (PAI), Ethyl Ammonium Iodide (EAI)) on triple cation perovskite thin films. As the number of carbon atoms in the alkane increases, the water contact angle gradually increases. Moreover, the defect state density is reduced to a certain extent compared to untreated 3D perovskite. The optimal PSCs with PAI-based 2D capping layer exhibit a power conversion efficiency (PCE) of 21.22% and remain 79.5% of initial PCE after 720 h. In addition, the reduced defect state density and improved crystallinity can be attributed to the hydrogen bonding interaction between the amine group and the [PbI 6] 4- framework. The emergence and development of 2D/3D perovskites have brought greater hope to commercialize the PSCs.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Imperfections and their passivation in halide perovskite solar cells10.1039/C8CS00853A ↗
3. Methodologies toward highly efficient perovskite solar cells10.1002/smll.201704177 ↗
4. Isothermally crystallized perovskites at room-temperature10.1039/D0EE01967D ↗
5. Preparation of hysteresis-free flexible perovskite solar cells via interfacial modification10.1016/j.jmst.2020.05.029 ↗
6. Diffusion engineering of ions and charge carriers for stable efficient perovskite solar cells10.1038/ncomms15330 ↗
7. Perovskite solar cells with atomically coherent interlayers on SnO2 electrodes10.1038/s41586-021-03964-8 ↗
8. Chemical management for colorful, efficient, and stable inorganic-organic hybrid nanostructured solar cells10.1021/nl400349b ↗
9. Toward perovskite solar cell commercialization: a perspective and research roadmap based on interfacial engineering
10. New strategy to overcome the instability that could speed up the commercialization of perovskite solar cells10.1002/admi.201900134 ↗
11. Strategies toward stable perovskite solar cells10.1002/admi.201800264 ↗
12. Two-Dimensional halide perovskites in solar cells: 2D or not 2D?10.1002/cssc.201802992 ↗
13. High-performance thickness insensitive perovskite solar cells with enhanced moisture stability10.1002/aenm.201800438 ↗
14. Stability of perovskite solar cells: a prospective on the substitution of the ACation and XAnion10.1002/anie.201603694 ↗
15. Intrinsic instability of inorganic-organic hybrid halide perovskite materials
16. Hybrid perovskite/perovskite heterojunction solar cells10.1021/acsnano.6b01535 ↗
17. Perfluorinated self-assembled monolayers enhance the stability and efficiency of inverted perovskite solar cells10.1021/acsnano.9b03268 ↗
18. An interface stabilized perovskite solar cell with high stabilized efficiency and low voltage loss10.1039/C9EE00751B ↗
19. Ligand-Stabilized reduced-dimensionality perovskites10.1021/jacs.5b11740 ↗
20. Phenylalkylamine passivation of organolead halide perovskites enabling high-efficiency and air-stable photovoltaic cells10.1002/adma.201603062 ↗
21. PEROVSKITE SOLAR CELLS Stability lies at interfaces10.1038/nenergy.2017.115 ↗
22. New strategies for defect passivation in high-efficiency perovskite solar cells10.1002/aenm.201903090 ↗
23. 2D/3D perovskite engineering eliminates interfacial recombination losses in hybrid perovskite solar cells
24. Optimal interfacial engineering with different length of alkylammonium halide for efficient and stable perovskite solar cells
25. Introduction of hydrophobic ammonium salts with halogen functional groups for high-efficiency and stable 2D/3D perovskite solar cells10.1002/adfm.201970324 ↗
26. Spacer engineering using aromatic formamidinium in 2D/3D hybrid perovskites for highly efficient solar cells10.1021/acsnano.1c02191 ↗
27. Tailoring organic cation of 2D air-stable organometal halide perovskites for highly efficient planar solar cells10.1002/aenm.201700162 ↗
28. Improved performance and stability of perovskite solar cells by crystal crosslinking with alkylphosphonic acid omega-ammonium chlorides10.1038/nchem.2324 ↗
29. The effect of hydrophobicity of ammonium salts on stability of quasi-2D perovskite materials in moist condition10.1002/aenm.201800051 ↗
30. Molecular engineering for two-dimensional perovskites with photovoltaic efficiency exceeding 18%10.1016/j.matt.2020.11.011 ↗
31. Stability-limiting heterointerfaces of perovskite photovoltaics10.1038/s41586-022-04604-5 ↗
32. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
33. Transcending the slow bimolecular recombination in lead-halide perovskites for electroluminescence10.1038/ncomms14558 ↗
34. Molecular engineering of simple carbazole-triphenylamine hole transporting materials by replacing benzene with pyridine unit for perovskite solar cells10.1002/solr.201800337 ↗
35. In situ observation of vapor-assisted 2D-3D heterostructure formation for stable and efficient perovskite solar cells10.1021/acs.nanolett.9b04759 ↗
36. Trap state passivation by rational ligand molecule engineering toward efficient and stable perovskite solar cells exceeding 23% efficiency10.1002/aenm.202100529 ↗
37. Passivating crystal boundaries with potassium-rich phase in organic halide perovskite10.1002/solr.201900053 ↗
38. Depleted hole conductor-free lead halide iodide heterojunction solar cells10.1039/c3ee42282h ↗
39. Intact 2D/3D halide junction perovskite solar cells via solid-phase in-plane growth10.1038/s41560-020-00749-7 ↗
40. In situ growth of 2D perovskite capping layer for stable and efficient perovskite solar cells
41. In situ formation of a 2D/3D heterostructure for efficient and stable CsPbI2Br solar cells10.1039/C9TA08564E ↗
42. Two-dimensional perovskite capping layer for stable and efficient tin-lead perovskite solar cells10.1007/s11426-018-9436-1 ↗
43. Ionic transport in hybrid lead iodide perovskite solar cells10.1038/ncomms8497 ↗
44. Photovoltaic switching mechanism in lateral structure hybrid perovskite solar cells10.1002/aenm.201500615 ↗