journal article·2022-02

High k PVP titanium dioxide composite dielectric with low leakage current for thin film transistor

Yuexin Yang, Zhuohui Xu, Tian Qiu, Honglong Ning, Jinyao Zhong, Muyun Li, Dongxiang Luo, Xianzhe Liu, Rihui Yao, Junbiao Peng

Organic Electronics· Volume 101
Publisher page

Abstract

Titanium dioxide (TiO 2 ) dielectric has the potential to achieve low cost and low energy consumption in the area of Thin Film Transistor (TFT) due to its high relative dielectric constant. However, the large leakage current limits its application. In this paper, Polyvinylpyrrolidone (PVP) modified TiO 2 composite dielectric was prepared by the sol-gel method with a series of PVP concentrations. With increasing PVP concentration, the roughness, thickness and band gap increased, the leakage current density first decreased and then increased, while the area capacitance and the relative dielectric constant (k) decreased. After comparison, 0.05 wt% was the optimal modification concentration. TiO 2 : 0.05 wt % PVP composite film had smooth morphology and low roughness. The leakage current density of the Metal-Insulator-Metal (MIM) device (with the composite film as the insulator layer) was as low as 6.88 × 10 −9 A/cm 2 (at 1 MV/cm), and k is 69.7. PVP modified TiO 2 composite film showed good dielectric characteristics and satisfied the development trend of low leakage current and low energy consumption devices.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and devices · Thin-Film Transistor Technologies · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Solution processed metal oxide high-kappa dielectrics for emerging transistors and circuits
2. Low-voltage flexible organic electronics based on high-performance sol-gel titanium dioxide dielectric10.1021/acsami.5b00281 ↗
3. Comproportionation reaction synthesis to realize high‐performance water‐induced metal‐oxide thin‐film transistors10.1002/aelm.202000072 ↗
4. A critical role of amphiphilic polymers in organic–inorganic hybrid sol–gel derived gate dielectrics for flexible organic thin-film transistors10.1039/C8TC06625F ↗
5. Fully inkjet-printed transparent oxide thin film transistors using a fugitive wettability switch10.1002/aelm.201500086 ↗
6. Performance evaluation of free-silicon organic-inorganic hybrid (SiO2-TiO2-PVP) thin films as a gate dielectric
7. Sol-gel metal oxide dielectrics for all-solution-processed electronics10.1016/j.mser.2017.01.003 ↗
8. High dielectric constant gate oxides for metal oxide Si transistors10.1088/0034-4885/69/2/R02 ↗
9. Low-temperature sol-gel ZrHfO2-PMMA hybrid dielectric thin-films for metal oxide TFTs
10. Slot-die coating of sol–gel-based organic–inorganic nanohybrid dielectric layers for flexible and large-area organic thin film transistors
11. Modification of polymer gate dielectrics for organic thin-film transistor from inkjet printing10.1007/s00339-018-1899-4 ↗
12. A sol–gel titanium–silicon oxide/organic hybrid dielectric for low-voltage organic thin film transistors10.1039/C4TC02564D ↗
13. Thermal oxidation of silicon in a residual oxygen atmosphere-the RESOX process-for self-limiting growth of thin silicon dioxide films10.1088/0268-1242/31/10/105007 ↗
14. High-quality solution-processed silicon oxide gate dielectric applied on indium oxide based thin-film transistors10.1021/acsami.5b03105 ↗
15. A solution-processed silicon oxide gate dielectric prepared at a low temperature via ultraviolet irradiation for metal oxide transistors10.1039/C6TC03725A ↗
16. Morphology modulation of direct inkjet printing by incorporating polymers and surfactants into a sol–gel ink system10.1021/acs.langmuir.8b00745 ↗
17. Thermal effect of annealing-temperature on solution-processed high-k ZrO2 dielectrics10.1039/C9RA06132K ↗
18. Research progress of high dielectric constant zirconia-based materials for gate dielectric application10.3390/coatings10070698 ↗
19. Low-temperature, nontoxic water-induced high-k zirconium oxide dielectrics for low-voltage, high-performance oxide thin-film transistors10.1039/C6TC02607A ↗
20. Low-temperature fabrication of sputtered high-k HfO2 gate dielectric for flexible a-IGZO thin film transistors10.1063/1.5022088 ↗
21. Flexible inkjet printed high-k HfO2-based MIM capacitors10.1039/C5TC03307A ↗
22. Temperature effects on a-IGZO thin film transistors using HfO2 gate dielectric material
23. A solution-processed yttrium oxide gate insulator for high-performance all-solution-processed fully transparent thin film transistors10.1039/c2jm34162j ↗
24. Solution-processed ternary alloy aluminum yttrium oxide dielectric for high performance indium zinc oxide thin-film transistors
25. Solution-processed yttrium oxide dielectric for high-performance IZO thin-film transistors
26. Poly(3-hexylthiophene) thin-film transistors with dual insulator layers10.1143/JJAP.46.913 ↗
27. Performance of organic field-effect transistor based on poly(3-hexylthiophene) as a semiconductor and titanium dioxide gate dielectrics by the solution process
28. Solution-Processed indium-zinc-oxide thin film transistors with high-k Magnesium titanium oxide dielectric10.1109/LED.2014.2311117 ↗
29. Fabrication of organic thin-film transistors based on high dielectric nanocomposite insulators molecular crystals and liquid crystals
30. Electrical and mechanical properties of low temperature evaporated silicon dioxide/polyimide dual-layer insulator for plastic-based polymer transistor10.1016/S0040-6090(03)00407-3 ↗
31. Ultrahigh energy density due to self-growing double dielectric layers at a titanium/sol–gel-derived amorphous aluminium oxide interface10.1039/C8TC02524J ↗
32. Structural and optical properties of multilayered un-doped and cobalt doped TiO2 thin films
33. Solution-based TiO2−Polymer composite dielectric for low operating voltage OTFTs10.1021/ja104840b ↗
34. Fabrication of organic thin film transistors for application in flexible sensors10.1063/1.5093883 ↗
35. Preparation of poly(4-vinylphenol)/titanium dioxide composite and its application as a gate dielectric for organic thin-film transistors10.1166/jnn.2011.3695 ↗
36. Light-induced characteristic variations in organic thin-film transistors with a poly(vinylphenol-co-methyl methacrylate)/titanium-dioxide nanocomposite gate dielectric10.3938/jkps.67.1853 ↗
37. High-mobility ZnO thin film transistors based on solution-processed Hafnium oxide gate dielectrics10.1002/adfm.201402684 ↗
38. Yang · 2006 · 239
39. Roughness and hydrophobicity studies of nanofiltration membranes using different modes of AFM10.1016/j.jcis.2005.01.095 ↗
40. Inkjet printing of homogeneous and green cellulose nanofibril dielectrics for high performance IGZO TFTs
41. Initiated chemical vapor deposition of polyvinylpyrrolidone-based thin films10.1016/j.polymer.2006.07.068 ↗
42. Poly(vinyl pyrrolidone‐co‐octavinyl polyhedral oligomeric silsesquioxane) hybrid nanocomposites: preparation, thermal properties, and Tg improvement mechanism10.1002/app.29321 ↗
43. Performance of organic field-effect transistor based on poly(3-hexylthiophene) as a semiconductor and titanium dioxide gate dielectrics by the solution process
44. Effects of annealing temperature on optical band gap of sol-gel tungsten trioxide films10.3390/mi9080377 ↗
45. High permittivity cerium oxide thin films on AlGaN/GaN heterostructures10.1063/1.4820795 ↗
46. SrTa2O6 induced low voltage operation of InGaZnO thin-film transistors