journal article·2016-06

Fluorination as an effective tool to increase the photovoltaic performance of indacenodithiophene-alt-quinoxaline based wide-bandgap copolymers

Qunping Fan, Yu Liu, Huanxiang Jiang, Wenyan Su, Linrui Duan, Hua Tan, Yuanyuan Li, Jiyong Deng, Renqiang Yang, Weiguo Zhu

Publisher page

Abstract

Abstract To investigate the effect of the fluoride phenyl side-chains into quinoxaline (PQx) unit on the photovoltaic performances of polymers, we demonstrated the synthesis and characterization of two novel wide-bandgap (WBG) copolymers, PIDT-DTPQx and PIDT-DTFPQx, in which indacenodithiophene (IDT), 2,3-diphenylquinoxaline (PQx) (and/or 2,3-bis(4-fluorophenyl)quinoxaline (FPQx)) and thiophene (T) were used as the donor (D) unit, acceptor (A) unit and π-bridge, respectively. Compared to the non-fluorine substituted PIDT-DTPQx, fluorine substituted PIDT-DTFPQx presents a deep HOMO energy level and a high hole mobility. Obviously, improved the Voc, Jsc, and FF simultaneously, giving rise to overall efficiencies in the PIDT-DTFPQx/PC71BM-based PSCs. A highest PCE of 5.78% was obtained with a Voc of 0.86 V, Jsc of 10.84 mA cm−2 and FF of 61.7% in the PIDT-DTFPQx/PC71BM-based PSCs, while PIDT-DTPQx based devices also demonstrated a PCE of 5.11%, under the illumination of AM 1.5G (100 mW cm−2). Note that these PCE values were achieved for PSCs without any extra treatments. Furthermore, these optimal devices have a film thickness of about 175 nm for the polymer/PC71BM-based active layers. The results provide that introduction of the fluorine atom into quinoxaline unit by side-chain engineering is one of the effective strategies to construct the promising polymer donor materials for future application of large-area polymer solar cells.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Organic Light-Emitting Diodes Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
2. Isoindigo-based polymers and small molecules for bulk heterojunction solar cells and field effect transistors10.1002/adma.201304945 ↗
3. Side-chain engineering of high-efficiency conjugated polymer photovoltaic materials10.1007/s11426-014-5260-2 ↗
4. The future of organic photovoltaics10.1039/C4CS00227J ↗
5. Molecular design toward highly efficient photovoltaic polymers based on two-dimensional conjugated benzodithiophene10.1021/ar5000743 ↗
6. High-molecular-weight regular alternating diketopyrrolopyrrole based terpolymers for efficient organic solar cells10.1002/anie.201302319 ↗
7. Development of large band-gap conjugated copolymers for efficient regular single and tandem organic solar cells10.1021/ja406220a ↗
8. Enhancing the photovoltaic properties of low bandgap terpolymers based on benzodithiophene and phenanthrophenazine by introducing different second acceptor units10.1039/C5PY01985K ↗
9. Systematic structure modification of a low bandgap conjugated polymer improves thin film morphology and photovoltaic performance by incorporating naphthalene into side chains10.1039/C5TC01142F ↗
10. Chalcogenophene comonomer comparison in small band gap diketopyrrolopyrrole-based conjugated polymers for high performing field-effect transistors and organic solar cells10.1021/ja511984q ↗
11. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
12. Realizing over 10% efficiency in polymer solar cell by device optimization10.1007/s11426-014-5273-x ↗
13. A high efficiency solution processed polymer inverted triple-junction solar cell exhibiting a power conversion efficiency of 11.83%10.1039/C4EE03048F ↗
14. A polymer tandem solar cell with 10.6% power conversion efficiency10.1038/ncomms2411 ↗
15. Improvement of open-circuit voltage and photovoltaic properties of 2D-conjugated polymers by alkylthio substitution10.1039/C4EE00446A ↗
16. Enhancing the photovoltaic properties of terpolymers containing benzo[1,2-b:4,5-b′]dithiophene, phenanthro[4,5-abc]phenazine and benzo[c][1,2,5]thiadiazole by changing the substituents10.1039/C5TC00785B ↗
17. Thiophene-fused benzothiadiazole: a strong electron-acceptor unit to build D–A copolymer for highly efficient polymer solar cells10.1021/cm501052a ↗
18. Donor–acceptor copolymers based on benzo[1,2-b:4,5-b′]dithiophene and pyrene-fused phenazine for high-performance polymer solar cells10.1016/j.orgel.2014.09.019 ↗
19. Low bandgap conjugated polymers based on mono-fluorinated isoindigo for efficient bulk heterojunction polymer solar cells processed with non-chlorinated solvents10.1039/C4EE02362E ↗
20. The enhanced performance of fluorinated quinoxaline-containing polymers by replacing carbon with silicon bridging atoms on the dithiophene donor skeleton10.1039/C4PY01622J ↗
21. A thieno[3,2-b][1]benzothiophene isoindigo building block for additive- and annealing-free high-performance polymer solar cells10.1002/adma.201501841 ↗
22. Influences of the backbone randomness on the properties, morphology and performances of the fluorinated benzoselenadiazole-benzothiadiazole based random copolymers10.1039/C5PY00175G ↗
23. Small-bandgap polymer solar cells with unprecedented short-circuit current density and high fill factor10.1002/adma.201501132 ↗
24. Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2′,3′-d]silole copolymer with a power conversion efficiency of 7.3%10.1021/ja200314m ↗
25. Dithienogermole as a fused electron donor in bulk heterojunction solar cells10.1021/ja204056m ↗
26. Well-controlled thieno[3,4-c]pyrrole-4,6-(5H)-dione based conjugated polymers for high performance organic photovoltaic cells with the power conversion efficiency exceeding 9%10.1039/C5EE01627D ↗
27. Side-chain engineering of isoindigo-containing conjugated polymers using polystyrene for high-performance bulk heterojunction solar cells10.1021/cm4024259 ↗
28. Synergistic effect of fluorination on molecular energy level modulation in highly efficient photovoltaic polymers10.1002/adma.201304427 ↗
29. Enhanced photovoltaic performance by modulating surface composition in bulk heterojunction polymer solar cells based on PBDTTT-C-T/PC71BM10.1002/adma.201400411 ↗
30. An easy and effective method to modulate molecular energy level of the polymer based on benzodithiophene for the application in polymer solar cells10.1002/adma.201304631 ↗
31. Efficient polymer solar cells based on benzothiadiazole and alkylphenyl substituted benzodithiophene with a power conversion efficiency over 8%10.1002/adma.201301494 ↗
32. An isoindigo containing donor-acceptor polymer: synthesis and photovoltaic properties of all solution-processed ITO- and vacuum-free large area roll-coated single junction and tandem solar cells10.1039/C4TC02877E ↗
33. High mobility diketopyrrolopyrrole (DPP)-based organic semiconductor materials for organic thin film transistors and photovoltaics10.1039/c3ee00015j ↗
34. Synthesis and properties of D–A copolymers based on dithienopyrrole and benzothiadiazole with various numbers of thienyl units as spacers10.1039/C4PY00975D ↗
35. Enhanced open-circuit voltage in polymer solar cells by dithieno[3,2-b:2′,3′-d]pyrrole N-acylation10.1039/C4TA00525B ↗
36. A low band-gap copolymer composed of thienyl substituted anthracene and diketopyrrolopyrrole compatible with multiple electron acceptors for high efficiency polymer solar cells10.1039/C5PY00358J ↗
37. A large-bandgap conjugated polymer for versatile photovoltaic applications with high performance
38. Organic solar cells based on a 2D benzo[1,2-b:4,5-b′]difuran-conjugated polymer with high-power conversion efficiency10.1002/adma.201503023 ↗
39. Significantly increasing open-circuit voltage of the benzo[1,2-b:4,5-b′]dithiophene-alt-5,8-dithienyl-quinoxaline copolymers based PSCs by appending dioctyloxy chains at 6,7-positions of quinoxaline10.1016/j.orgel.2014.11.021 ↗
40. Anthracene-containing wide-band-gap conjugated polymers for high-open-circuit voltage polymer solar cells10.1002/marc.201300299 ↗
41. A polythiophene derivative with superior properties for practical application in polymer solar cells10.1002/adma.201401494 ↗
42. Single-junction organic solar cells based on a novel wide-bandgap polymer with efficiency of 9.7%10.1002/adma.201500647 ↗
43. Indacenodithiophene and quinoxaline-based conjugated polymers for highly efficient polymer solar cells10.1021/cm200316s ↗
44. Improved charge transport and absorption coefficient in indacenodithieno[3,2-b]thiophene-based ladder-type polymer leading to highly efficient polymer solar cells10.1002/adma.201203246 ↗
45. Influence of D/A ratio on photovoltaic performance of a highly efficient polymer solar cell system10.1002/adma.201202719 ↗
46. Synthesis and photovoltaic properties of D–A copolymers based on alkyl-substituted indacenodithiophene donor unit10.1021/cm2019586 ↗
47. Enhanced photovoltaic performance of indacenodithiophene-quinoxaline copolymers by side chain modulation10.1002/aenm.201400680 ↗
48. Improved photovoltaic performance of a 2D-conjugated benzodithiophene-based polymer by the side chain engineering of quinoxaline10.1039/C5PY00305A ↗
49. Efficient polymer solar cells based on a new quinoxaline derivative with fluorinated phenyl side chain10.1039/C6TC00353B ↗
50. Incorporation of fluorine onto different positions of phenyl substituted benzo[1,2-b:4,5-b′]dithiophene unit: influence on photovoltaic properties10.1021/acs.macromol.5b00564 ↗
51. Highly efficient photovoltaic polymers based on benzodithiophene and quinoxaline with deeper HOMO levels10.1021/acs.macromol.5b00829 ↗
52. Benzodithiophene-based two-dimensional polymers with extended conjugated thienyltriphenylamine substituents for high-efficiency polymer solar cells10.1016/j.orgel.2015.04.013 ↗
53. Fluorine substitution enhanced photovoltaic performance of a D-A1-D-A2 copolymer10.1039/c3cc44931a ↗
54. Effect of fluorination on the performance of poly(thieno[2,3-f]benzofuran-co- benzothiadiazole) derivatives10.1039/C5RA03405A ↗
55. Efficient solar cells based on a new polymer from fluorinated benzothiadiazole and alkylthienyl substituted thieno[2,3-f]benzofuran10.1016/j.dyepig.2015.01.021 ↗
56. A new polymer from fluorinated benzothiadiazole and alkoxylphenyl substituted benzo[1,2-b:4,5-b′]dithiophene: synthesis and photovoltaic applications10.1016/j.synthmet.2013.11.009 ↗
57. Donoracceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells10.1021/ja201131h ↗
58. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
59. Improved photovoltaic performance of a side chain D–A polymer in polymer solar cells by shortening the phenyl spacer between the D and A units10.1002/macp.201400298 ↗