journal article·2018-11

Memristive devices with a large memory margin based on nanocrystalline organic-inorganic hybrid CH3NH3PbBr3 perovskite active layer

Yong Hun Lee, Dae Hun Kim, Chaoxing Wu, Tae Whan Kim

Publisher page

Abstract

Abstract Perovskite materials have been utilized as promising active materials for memristive devices due to their excellent properties. However, most reported perovskite-based memristive devices exhibit relatively low current ON/OFF ratios, which limits their practical applications in memory devices. In this work, memristive devices with a large memory margin were fabricated utilizing a CH3NH3PbBr3 (MAPbBr3) perovskite layer. The nanocrystalline MAPbBr3 perovskite thin films were successfully formed at low temperature by using a chlorobenzene dripping method. The MAPbBr3 perovskite layer was employed as a resistive switching layer in memristive devices with a structure of indium-tin-oxide/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/MAPbBr3/Al. The maximum ON/OFF ratio of the memristive devices based on the MAPbBr3 perovskite was as large as 3.6x106. The memristive devices showed high device-to-device reproducibility with set-voltage distributions between −0.5 and −0.8 V, as well as good endurances of at least 120 cycles and retention times longer than 1x104 s. The carrier transport mechanisms of the memristive devices were described on the basis of the I-V curves, and their operating mechanisms were explained via the formation and rupture of filaments in the MAPbBr3 perovskite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Advanced Memory and Neural Computing · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. Mimicking classical conditioning based on a single flexible memristor
2. Flexible three-dimensional artificial synapse networks with correlated learning and trainable memory capability10.1038/s41467-017-00803-1 ↗
3. Flexible bio-memristive devices based on chicken egg albumen:Au@SiO2 core-shell nanoparticle nanocomposites10.1038/s41598-017-12209-6 ↗
4. One-Step all-solution-based Au–GO core–shell nanosphere active layers in nonvolatile ReRAM devices10.1002/adfm.201604604 ↗
5. Transferable and flexible resistive switching memory devices based on PMMA films with embedded Fe3O4 nanoparticles10.1063/1.4983382 ↗
6. How ligands affect resistive switching in solution-processed HfO2 nanoparticle assemblies10.1021/acsami.7b17376 ↗
7. Facile synthesis of Co9Se8 quantum dots as charge traps for flexible organic resistive switching memory device10.1021/acsami.6b09616 ↗
8. Flexible memristive devices based on InP/ZnSe/ZnS core–multishell quantum dot nanocomposites10.1021/acsami.7b18817 ↗
9. Memory effect behavior with respect to the crystal grain size in the organic-inorganic hybrid perovskite nonvolatile resistive random access10.1038/s41598-017-16805-4 ↗
10. Flexible all-inorganic per ovskite CsPbBr3 nonvolatile memory device10.1021/acsami.6b15149 ↗
11. Anomalous photovoltaic effect in organic-inorganic hybrid perovskite solar cells10.1126/sciadv.1602164 ↗
12. Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells10.1038/nmat4014 ↗
13. Introducing Cu2O thin films as a hole-transport layer in efficient planar perovskite solar cell structures10.1021/acs.jpcc.5b11540 ↗
14. Performance improvement of perovskite solar cells by employing a CdSe quantum dot/PCBM composite as an electron transport layer10.1039/C7TA00203C ↗
15. Facile assembly of high-quality organic–inorganic hybrid perovskite quantum dot thin films for bright light-emitting diodes
16. Inch-Size single crystal of a lead-free organic–inorganic hybrid perovskite for high-performance photodetector10.1002/adfm.201705467 ↗
17. Organic–inorganic hybrid CH3NH3PbI3 perovskite materials as channels in thin-film field-effect transistors10.1039/C5RA24154E ↗
18. Self-regulation mechanism for charged point defects in hybrid halide perovskites10.1002/anie.201409740 ↗
19. Understanding the rate-dependent J–V hysteresis, slow time component, and aging in CH3NH3PbI3 perovskite solar cells: the role of a compensated electric field10.1039/C4EE03664F ↗
20. Defect migration in methylammonium lead io dide and its role in perovskite solar cell operation10.1039/C5EE01265A ↗
21. Flexible hybrid Organic−Inorganic perovskite memory10.1021/acsnano.6b01643 ↗
22. Resistive switching behavior in organic–inorganic hybrid CH3NH3PbI3−xClx perovskite for resistive random access memory devices10.1002/adma.201502889 ↗
23. Effect of halide-mixing on the switching behaviors of organic inorganic hybrid perovskite memory10.1038/srep43794 ↗
24. Enhanced endurance organolead halide perovskite resistive switching memories operable under an extremely low bending radius10.1021/acsami.7b08197 ↗
25. A facile one-step solution deposition via non-solvent/solvent mixture for efficient organometal halide perovskite light-emitting diodes10.1039/C6NR01092J ↗
26. High-performance perovskite light-emitting diodes via morphological control of perovskite films10.1039/C5NR05604G ↗
27. High-performance planar green light-emitting diodes based on a PEDOT: PSS/CH3NH3PbBr3/ZnO sandwich structure10.1039/C6NR00818F ↗
28. Enhancements of the memory margin and the stability of an organic bistable device due to a graphene oxide:mica nanocomposite sandwiched between two polymer (9-vinylcarbazole) buffer layers10.1016/j.apsusc.2017.08.105 ↗
29. Efficient tristable resistive memory based on single layer graphene/insulating polymer multi-stacking layer10.1063/1.4875596 ↗
30. Diasa · Appl. Surf. Sci. · 2017 · 424 · 12210.1016/j.apsusc.2017.01.140 ↗