journal article·2018-12

High-performance light-emitting diode with poly(ethylene oxide) passivated quasi two dimensional perovskite emitting layer

Wentao Bi, Xin Huang, Yang Tang, Huan Liu, Pengcheng Jia, Ke Yu, Yufeng Hu, Zhidong Lou, Feng Teng, Yanbing Hou

Publisher page

Abstract

Abstract Two-dimensional perovskites have attracted attention as a kind of potential electroluminescence (EL) materials due to their controllable quantum confine effect, but there are still some inadequacies in their EL efficiency and stability. In this work, the enhanced optical and electrical properties of quasi two dimensional organometal halide perovskite (QTDOHP) passivated by poly(ethylene oxide) (PEO) are reported. The introduction of PEO can not only passivate the surface defects of QTDOHP, but also suppress the formation of low luminous efficient single-layered QTDOHP phase. The photoluminescence quantum yields (PLQY) of the composite film has been approximately increased by 350% compared with pure QTDOHP films. The EL devices based on emitting layer (EML) of PEO-QTDOHP composite film have achieved a brightness of up to 41800 cd/m2 and a maximal current efficiency of 25.1 cd/A. The EL intensity of the device with PEO dropped to 70% of the initial value after around 7 h under a constant current density of 10 mA/cm2, which indicates an excellent device operation stability. The composite film of QTDOHP and PEO would serve as distinct and promising materials for light-emitting diode application.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Quantum Dots Synthesis And Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. Layered organic–inorganic hybrid perovskites: structure, optical properties, film preparation, patterning and templating engineering10.1039/c001929a ↗
2. Sequential deposition as a route to high-performance perovskite-sensitized solar cells10.1038/nature12340 ↗
3. High photoluminescence efficiency and optically pumped lasing in solution-processed mixed halide perovskite semiconductors10.1021/jz5005285 ↗
4. Low-temperature solution-processed wavelength-tunable perovskites for lasing10.1038/nmat3911 ↗
5. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber10.1126/science.1243982 ↗
6. CH3NH3SnxPb(1-x)I3 perovskite solar cells covering up to 1060 nm10.1021/jz5002117 ↗
7. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes10.1126/science.aad1818 ↗
8. Interfacial control toward efficient and low-voltage perovskite light-emitting diodes10.1002/adma.201405217 ↗
9. Bright light-emitting diodes based on organometal halide perovskite10.1038/nnano.2014.149 ↗
10. Room-temperature synthesis, photoluminescence superiorities, underlying origins and white light-emitting diodes10.1002/adfm.201600109 ↗
11. Direct measurement of the exciton binding energy and e ective masses for charge carriers in organic–inorganic tri-halide perovskites10.1038/nphys3357 ↗
12. Efficient and stable solution-processed planar perovskite solar cells via contact passivation10.1126/science.aai9081 ↗
13. Multicolored organic/inorganic hybrid perovskite light-emitting diodes10.1002/adma.201403751 ↗
14. Unravelling additive-based nanocrystal pinning for high efficiency organic-inorganic halide perovskite light-emitting diodes10.1016/j.nanoen.2017.10.012 ↗
15. Solid-state principles applied to organic-inorganic perovskites: new tricks for an old dog10.1039/C4SC02211D ↗
16. Excitons in ultrathin organic-inorganic perovskite crystals10.1103/PhysRevB.92.045414 ↗
17. Perovskite energy funnels for efficient light-emitting diodes10.1038/nnano.2016.110 ↗
18. Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells10.1038/nphoton.2016.185 ↗
19. Efficient green light-emitting diodes based on quasi-two-dimensional composition and phase engineered perovskite with surface passivation10.1038/s41467-018-02978-7 ↗
20. Efficient light-emitting diodes based on nanocrystalline perovskite in a dielectric polymer matrix10.1021/acs.nanolett.5b00235 ↗
21. Improved performance and stability of all-inorganic perovskite light-emitting diodes by antisolvent vapor treatment10.1002/adfm.201700338 ↗
22. Interface engineering of perovskite solar cells with PEO for improved performance10.1039/C5TA00407A ↗
23. Fully printed halide perovskite light-emitting diodes with silver nanowire electrodes10.1021/acsnano.5b07506 ↗
24. Efficient visible Quasi-2D perovskite light-emitting diodes10.1002/adma.201601369 ↗
25. Dielectric confinement effect on excitons inPbI4-based layered semiconductors10.1103/PhysRevB.45.6961 ↗
26. Recombination kinetics in organic-inorganic perovskites: excitons, free charge, and subgap states10.1103/PhysRevApplied.2.034007 ↗
27. Atomically thin two-dimensional organic-inorganic hybrid perovskites10.1126/science.aac7660 ↗
28. A redox-based resistive switching memory device consisting of organic-inorganic hybrid perovskite/polymer composite thin film10.1002/aelm.201700344 ↗
29. Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%10.1038/nenergy.2016.142 ↗
30. Structural and conductivity studies of poly(ethylene oxide)–silver triflate polymer electrolyte system
31. Ultrapure green light-emitting diodes using two-dimensional formamidinium perovskites: achieving recommendation 2020 color coordinates10.1021/acs.nanolett.7b01544 ↗
32. Tailoring the energy landscape in Quasi-2D halide perovskites enables efficient green-light emission10.1021/acs.nanolett.7b00976 ↗