Low-band gap copolymers of ethynylfluorene and 3,6-dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione synthesized under microwave irradiation for polymer photovoltaic cells
Source abstract
Abstract
Abstract Copolymers with alternative electron-donating and electron-withdrawing units can exhibit a low-band gap and can be used as the donor materials in polymer photovoltaic cells (PVs). This paper reports the synthesis of copolymers of electron-donating ethynylfluorene and electron-withdrawing 3,6-dithiophen-2-yl-2,5-dihydropyrrolo[3,4- c ]pyyrole-1,4-dione (DPP) via the Pd-catalyzed Sonogashira coupling and their application in polymer PVs. Applying microwave irradiation during the Sonogashira coupling can shorten the polymerization time from several days to a couple of minutes and improve the molecular weight. These polymers have band gaps of about 1.85 eV. Their energy levels indicate that they can be used as the donor materials for polymer PVs. Polymer PVs were fabricated using these polymers as donors and [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) as acceptor. Applying the microwave irradiation during the Sonogashira coupling can significantly improve the photovoltaic performance of the polymer PVs. Power conversion efficiency (PCE) of 2.25% was achieved on polymer PVs under AM 1.5G illumination (100 mW cm −2 ).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Organic Light-Emitting Diodes Research · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. 6.5% efficiency of polymer solar cells based on poly(3-hexylthiophene) and indene-C60 bisadduct by device optimization10.1002/adma.201001339 ↗
2. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
3. Conjugated polymer photovoltaic materials with broad absorption band and high charge carrier mobility10.1002/adma.200800606 ↗
4. Polymer–fullerene composite solar cells10.1002/anie.200702506 ↗
5. A review of polymer multijunction solar cells10.1039/b926255p ↗
6. High-efficiency inverted heterojunction polymer solar cells with UV ozone-treated ultrathin aluminum interlayer10.1063/1.3479916 ↗
7. Development of novel conjugated donor polymers for high-efficiency bulk-heterojunction photovoltaic devices10.1021/ar900061z ↗
8. Synthesis of conjugated polymers for organic solar cell applications10.1021/cr900182s ↗
9. Small bandgap polymers for organic solar cells10.1080/15583720802231833 ↗
10. High-performance polymer heterojunction solar cells of a polysilafluorene derivative10.1063/1.2836266 ↗
11. Bandgap and molecular energy level control of conjugated polymer photovoltaic materials based on benzo[1,2-b:4,5-b′]dithiophene10.1021/ma800820r ↗
12. A thieno[3,4-c]pyrrole-4,6-dione-based copolymer for efficient solar cells10.1021/ja101888b ↗
13. Synthetic control of structural order in N-alkylthieno[3,4-c]pyrrole-4,6-dione-based polymers for efficient solar cells10.1021/ja103275u ↗
14. For the bright future-bulk heterojunction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
15. Donor polymers containing benzothiadiazole and four thiophene rings in their repeating units with improved photovoltaic performance10.1021/ma900601y ↗
16. Synthesis and properties of monodisperse multi-triarylamine-substituted oligothiophenes and 4,7-bis(2′-oligothienyl)-2,1,3-benzothiadiazoles for organic solar cell applications10.1002/pola.23131 ↗
17. Synthesis and characterization of bridged bithiophene-based conjugated polymers for photovoltaic applications: acceptor strength and ternary blends10.1021/ma902206u ↗
18. Controlled microwave heating in modern organic synthesis10.1002/anie.200400655 ↗
19. Microwave-accelerated synthesis of lengthy and defect-free poly(m-phenyleneethynylene)s via AB′ and A(2)+BB′ polycondensation routes10.1039/b312762a ↗
20. Microwave-assisted synthesis of polythiophenes via the Stille coupling10.1016/j.synthmet.2004.09.015 ↗
21. Liquid-crystalline semiconducting polymers with high charge-carrier mobility10.1038/nmat1612 ↗
22. Microwave-assisted preparation of semiconducting polymers10.1002/marc.200600778 ↗
23. Alternating fluorene-di(thiophene)quinoxaline copolymers via microwave-supported Suzuki cross-coupling reactions10.1002/pola.23081 ↗
24. Streamlined microwave-assisted preparation of narrow-bandgap conjugated polymers for high-performance bulk heterojunction solar cells10.1038/nchem.403 ↗
25. Acetylene-based materials in organic photovoltaics10.3390/ijms11041471 ↗
26. Thienopyrazine-based low-bandgap poly(heteroaryleneethynylene)s for photovoltaic devices10.1002/marc.200600314 ↗
27. Combined effects of conjugation pattern and alkoxy side chains on the photovoltaic properties of thiophene-containing PPE-PPVs10.1002/pola.21928 ↗
28. Anthracene based conjugated polymers: correlation between pi–pi-stacking ability, photophysical properties, charge carrier mobility, and photovoltaic performance10.1021/ma902273s ↗
29. Organic molecules based on dithienyl-2,1,3-benzothiadiazole as new donor materials for solution-processed organic photovoltaic cells10.1016/j.solmat.2010.07.017 ↗
30. Solution-processable low-molecular weight extended arylacetylenes: versatile p-type semiconductors for field-effect transistors and bulk heterojunction solar cells10.1021/ja910420t ↗
31. Metallated conjugated polymers as a new avenue towards high-efficiency polymer solar cells10.1038/nmat1909 ↗
32. Fused ring thiophene-based poly(heteroarylene ethynylene)s for organic solar cells10.1016/j.solmat.2010.05.042 ↗
33. A novel tetrathiafulvalene-(TTF-) fused poly(aryleneethynylene) with an acceptor main chain and donor side chains: intramolecular charge transfer (CT), stacking structure, and photovoltaic property10.1021/ma702864c ↗
34. Narrow-bandgap diketo-pyrrolo-pyrrole polymer solar cells: the effect of processing on the performance10.1002/adma.200800456 ↗
35. A High-mobility low-bandgap poly(2,7-carbazole) derivative for photovoltaic applications10.1021/ma900364c ↗
36. Synthesis and characterization of new low-bandgap diketopyrrolopyrrole-based copolymers10.1021/ma901114j ↗
37. Poly(diketopyrrolopyrrole-terthiophene) for ambipolar logic and photovoltaics10.1021/ja907506r ↗
38. Bandgap and molecular level control of the low-bandgap polymers based on 3,6-dithiophen-2-yl-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione toward highly efficient polymer solar cells10.1021/ma9012972 ↗
39. Synthesis and photovoltaic properties of diketopyrrolopyrrole-based donor-acceptor copolymers10.1021/cm901487f ↗
40. Diketopyrrolopyrrole-based semiconducting polymer for photovoltaic device with photocurrent response wavelengths up to 1.1μm10.1021/ma902398q ↗
41. Synthesis and characterization of a narrow-bandgap polymer containing alternating cyclopentadithiophene and diketo-pyrrolo-pyrrole units for polar pell applications10.1002/pola.23931 ↗
42. Small band gap polymers based on diketopyrrolopyrrole10.1039/b919066j ↗
43. Germafluorenes: new heterocycles for plastic electronics10.1021/ma9025866 ↗
44. Stereocontrolled generation of the (2R) chroman core of vitamin E: total synthesis of (2R,4′RS,8′RS)-alpha-tocopherol10.1021/ol9020783 ↗
45. Large femtosecond third-order nonlinear optical response in a novel donor-acceptor copolymer consisting of ethynylfluorene and tetraphenyldiaminobiphenyl units10.1021/cm000961c ↗
46. Molecular-weight dependence of interchain polaron delocalization and exciton bandwidth in high-mobility conjugated polymers10.1103/PhysRevB.74.115318 ↗
47. Impact of molecular weight on charge carrier dissociation in solar cells from a polyfluorene derivative10.1016/j.orgel.2009.07.002 ↗
48. Influence of the substituent and polymerization methodology on the properties of chiral poly(dithieno[3,2-b:2′,3′-d]pyrrole)s10.1021/ma062808v ↗
49. Electrochemical properties of luminescent polymers and polymer light-emitting electrochemical cells10.1016/S0379-6779(99)00007-7 ↗
50. Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells10.1002/adfm.200305026 ↗
51. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
52. High-performance polymer photovoltaic cells with thick P3HT:PCBM films prepared by a quick drying process10.1016/j.solmat.2009.04.015 ↗
53. Effect of self-organization in polymer/fullerene bulk heterojunctions on solar cell performance10.1063/1.2335377 ↗
54. Hole transport in poly(phenylene vinylene)/methanofullerene bulk-heterojunction solar cells10.1002/adfm.200305156 ↗
55. Charge transport and photocurrent generation in poly(3-hexylthiophene):methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
56. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗