journal article·2020-07

Enhanced performance of tin halide perovskite solar cells by addition of hydrazine monohydrobromide

Dongdong Wu, Pengcheng Jia, Wentao Bi, Yang Tang, Jian Zhang, Bo Song, Liang Qin, Zhidong Lou, Yufeng Hu, Feng Teng, Yanbing Hou

Publisher page

Abstract

Abstract Although tin-based perovskite has been considered as a kind of potential environmentally-friendly photovoltaic materials, the tin-based perovskite solar cells are limited due to their poor stability and low conversion efficiency mainly tracing to the oxidation from Sn2+ to Sn4+ state in tin-based perovskite films. Herein, a facile reductive approach is developed to suppress the oxidation, in which tiny amount of hydrazine monohydrobromide is doped into FASnI3-based perovskite precursor solution as a reducing agent. Our results demonstrate that the addition of hydrazine monohydrobromide could reduce the defects and trap states in perovskite by inhibiting formation of tetravalent tin, and increase the open circuit voltage by widening the bandgap of perovskite. As a consequence, the best optimized perovskite solar cell achieves an excellent power conversion efficiency of 7.81%, which represented a 39.5% improvement compared to the best reference device. The optimized devices display stabilized power output near the maximum power point and negligible hysteresis effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells10.1021/ja809598r ↗
2. Progress in air-processed perovskite solar cells: from crystallization to photovoltaic performance10.1039/C9MH00325H ↗
3. Surface passivation of perovskite film for efficient solar cells10.1038/s41566-019-0398-2 ↗
4. Organometal perovskite light absorbers toward a 20% efficiency low-cost solid-state mesoscopic solar cell10.1021/jz400892a ↗
5. Efficient luminescent solar cells based on tailored mixed-cation perovskites10.1126/sciadv.1501170 ↗
6. High-performance photovoltaic perovskite layers fabricated through intramolecular exchange10.1126/science.aaa9272 ↗
7. Efficient hybrid solar cells based on meso-superstructured organometal halide perovskites10.1126/science.1228604 ↗
8. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
9. Efficient planar heterojunction perovskite solar cells by vapour deposition10.1038/nature12509 ↗
10. High-performance perovskite solar cells with enhanced environmental stability based on amphiphile-modified CH3NH3PbI310.1002/adma.201505255 ↗
11. Efficient and stable large-area perovskite solar cells with inorganic charge extraction layers10.1126/science.aad1015 ↗
12. Thin insulating tunneling contacts for efficient and water-resistant perovskite solar cells10.1002/adma.201600969 ↗
13. Discrete SnO2 nanoparticle‐modified poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) for efficient perovskite solar cells10.1002/solr.201900162 ↗
14. Performance analysis of perovskite solar cells in 2013–2018 using machine-learning tools10.1016/j.nanoen.2018.11.069 ↗
15. Anomalous band gap behavior in mixed Sn and Pb perovskites enables broadening of absorption spectrum in solar cells
16. Lead-free halide perovskite solar cells with high photocurrents realized through vacancy modulation10.1002/adma.201401991 ↗
17. All-solid-state dye-sensitized solar cells with high efficiency10.1038/nature11067 ↗
18. Temperature dependence of the band gap of perovskite semiconductor compound CsSnI310.1063/1.3638699 ↗
19. Device simulation of lead-free CH3NH3SnI3 perovskite solar cells with high efficiency10.1088/1674-1056/25/10/108802 ↗
20. Lead-free organic–inorganic tin halide perovskites for photovoltaic applications10.1039/C4EE01076K ↗
21. Long minority-carrier diffusion length and low surface-recombination velocity in inorganic lead-free CsSnI3 perovskite crystal for solar cells10.1002/adfm.201604818 ↗
22. Efficient lead-free solar cells based on hollow {en}MASnI3 perovskites10.1021/jacs.7b09018 ↗
23. Importance of reducing vapor atmosphere in the fabrication of tin-based perovskite solar cells10.1021/jacs.6b10734 ↗
24. Highly oriented low-dimensional tin halide perovskites with enhanced stability and photovoltaic performance10.1021/jacs.7b01815 ↗
25. Fabrication of efficient formamidinium tin iodide perovskite solar cells through SnF2-pyrazine complex10.1021/jacs.6b00142 ↗
26. Low-dimensional perovskite interlayer for highly efficient lead-free formamidinium tin iodide perovskite solar cells10.1016/j.nanoen.2018.05.006 ↗
27. Enhanced photovoltaic performance and stability with a new type of hollow 3D perovskite {en}FASnI310.1126/sciadv.1701293 ↗
28. Overcoming short-circuit in lead-free CH3NH3SnI3 perovskite solar cells via kinetically controlled gas-solid reaction film fabrication process10.1021/acs.jpclett.6b00118 ↗
29. Lead-free solid-state organic–inorganic halide perovskite solar cells10.1038/nphoton.2014.82 ↗
30. Boosting the power conversion efficiency of perovskite solar cells using self-organized polymeric hole extraction layers with high work function10.1002/adma.201401775 ↗
31. Improving film formation and photovoltage of highly efficient inverted-type perovskite solar cells through the incorporation of new polymeric hole selective layers10.1002/aenm.201502021 ↗
32. Solvent-mediated crystallization of CH3NH3SnI3 films for heterojunction depleted perovskite solar cells10.1021/jacs.5b06658 ↗
33. Lead-free inverted planar formamidinium tin triiodide perovskite solar cells achieving power conversion efficiencies up to 6.22%10.1002/adma.201602992 ↗
34. Highly reproducible Sn-based hybrid perovskite solar cells with 9% efficiency10.1002/aenm.201702019 ↗
35. Enhanced hole transportation for inverted tin-based perovskite solar cells with high performance and stability10.1002/adfm.201808059 ↗
36. Enhanced photovoltaic performance of FASnI3 based perovskite solar cells with hydrazinium chloride (N2H5Cl) co-additive10.1021/acsenergylett.8b00645 ↗
37. A cation-exchange approach for the fabrication of efficient methylammonium tin iodide perovskite solar cells10.1002/anie.201902418 ↗
38. Understanding the effect of donor layer thickness and a MoO3 hole transport layer on the open-circuit voltage in squaraine/C60 bilayer solar cells10.1021/jp406472t ↗
39. Quality factor in a-Si:H nip and pin diodes10.1063/1.353755 ↗
40. Persistent photovoltage in methylammonium lead iodide perovskite solar cells10.1063/1.4885255 ↗
41. Characterization of planar lead halide perovskite solar cells by impedance spectroscopy, open-circuit photovoltage decay, and intensity-modulated photovoltage/photocurrent spectroscopy10.1021/jp510837q ↗
42. Cooperative kinetics of depolarization in CH3NH3PbI3 perovskite solar cells10.1039/C4EE03171G ↗
43. Investigation on the overshoot of transient open-circuit voltage in methylammonium lead iodide perovskite solar cells
44. Revisiting lifetimes from transient electrical characterization of thin film solar cells; a capacitive concern evaluated for silicon, organic and perovskite devices10.1039/C7EE03155F ↗