journal article·2018-11

Dependence of power conversion properties of the hole-conductor-free mesoscopic perovskite solar cells on the thickness of carbon film

Kangming Li, Hui Chen, Huang Liu, Yongbo Yuan, Yongli Gao, Bingchu Yang, Conghua Zhou

Publisher page

Abstract

Abstract Effect of film thickness of mesoporous carbon on power conversion properties of the hole-conductor-free mesoscopic perovskite solar cells is studied by varying the volume of carbon paste. It is observed that, with increment of the film thickness, perovskite crystallites become smaller; As for the performance parameters, open-circuit voltage (VOC) drops slowly; while short-circuit current density (JSC) and fill factor (FF) rise at first, and then decrease after the film thickness surpasses about 22 μm. The slight decrease in open-circuit voltage (VOC) is due to heavier recombination brought by smaller crystallite size of perovskite. The upgraded short-circuit current density is due to accelerated charge-extracting rate across the interface between perovskite and mesoporous carbon, as revealed by the transient photocurrent (TPC) decay measurement. As for the improved fill factor, it is ascribed to the increased conductivity of the mesoporous carbon film. Besides, shelf-stability of the devices is tested. Stability up to 112 days (relative humidity of 40–70%, no encapsulation) are observed for these carbon based mesoporous perovskite solar cells, even though the mesoporous carbon is as thin as ∼4 μm. The sound stability shows that the TiO2 nanoparticle-bonding carbon film could provide effective barrier against H2O/O2.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Correlation of energy disorder and open-circuit voltage in hybrid perovskite solar cells10.1038/nenergy.2015.1 ↗
2. Perovskite solar cells with CuSCN hole extraction layers yield stabilized efficiencies greater than 20%10.1126/science.aam5655 ↗
3. A generic interface to reduce the efficiency-stability-cost gap of perovskite solar cells10.1126/science.aao5561 ↗
4. Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering10.1038/nenergy.2016.148 ↗
5. A hole-conductor-free, fully printable mesoscopic perovskite solar cell with high stability10.1126/science.1254763 ↗
6. Multifunctional benzoquinone additive for efficient and stable planar perovskite solar cells10.1002/adma.201603808 ↗
7. Best Reaserch-Cells Efficiencies · 2017
8. Metal-halide perovskites for photovoltaic and light-emitting devices10.1038/nnano.2015.90 ↗
9. Stable organic-inorganic perovskite solar cells without hole-conductor layer achieved via cell structure design and contact engineering10.1002/adfm.201504564 ↗
10. Low-cost and Efficient Hole-Transport-Material-free perovskite solar cells employing controllable electron-transport layer based on P25 nanoparticles10.1016/j.electacta.2016.07.095 ↗
11. Stable large-area (10 x 10 cm2) printable mesoscopic perovskite module exceeding 10% efficiency10.1002/solr.201600019 ↗
12. A large area (70 cm2) monolithic perovskite solar module with a high efficiency and stability10.1039/C6EE02693A ↗
13. Application of mesoporous SiO2 layer as an insulating layer in high performance hole transport material free CH3NH3PbI3 perovskite solar cells10.1016/j.jpowsour.2016.04.124 ↗
14. Stable monolithic hole-conductor-free perovskite solar cells using TiO2 nanoparticle binding carbon films10.1016/j.orgel.2017.03.005 ↗
15. Efficient and stable hole-conductor-free mesoscopic perovskite solar cells using SiO2 as blocking layer10.1016/j.orgel.2018.04.008 ↗
16. Full printable processed mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cells with carbon counter electrode10.1038/srep03132 ↗
17. Synergy of ammonium chloride and moisture on perovskite crystallization for efficient printable mesoscopic solar cells10.1038/ncomms14555 ↗
18. Critical parameters in TiO2/ZrO2/Carbon-based mesoscopic perovskite solar cell10.1016/j.jpowsour.2015.05.106 ↗
19. Low-Temperature processed, efficient, and highly reproducible cesium-doped triple cation perovskite planar heterojunction solar cells10.1002/solr.201700209 ↗
20. Irreversible light-soaking effect of perovskite solar cells caused by light-induced oxygen vacancies in titanium oxide10.1063/1.4994085 ↗
21. Accelerated electron extraction and improved UV stability of TiO2 based perovskite solar cells by SnO2 based surface passivation10.1016/j.orgel.2018.05.008 ↗
22. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells10.1038/nmat4014 ↗
23. Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors10.1038/nphoton.2013.80 ↗
24. 14.7% efficient mesoscopic perovskite solar cells using single walled carbon nanotubes/carbon composite counter electrodes10.1039/C5NR07347B ↗
25. Boron doping of multiwalled carbon nanotubes significantly enhances hole extraction in carbon-based perovskite solar cells10.1021/acs.nanolett.7b00200 ↗
26. Stable organic-inorganic perovskite solar cells without hole-conductor layer achieved via cell structure design and contact engineering10.1002/adfm.201504564 ↗
27. Full printable perovskite solar cells based on mesoscopic TiO2/Al2O3/NiO (carbon nanotubes) architecture10.1016/j.solener.2017.01.019 ↗
28. Transient photocurrent response of small-molecule bulk heterojunction solar cells10.1002/adma.201305160 ↗
29. Solvent annealing of perovskite-induced crystal growth for photovoltaic-device efficiency enhancement10.1002/adma.201401685 ↗
30. Interface engineering of highly efficient perovskite solar cells10.1126/science.1254050 ↗
31. Effect of poly (ethylene glycol) on coarsening dynamics of titanium dioxide nanocrystallites in hydrothermal reaction and the application in dye sensitized solar cells10.1016/j.jcis.2011.12.006 ↗
32. Hole-conductor-free fully printable mesoscopic solar cell with mixed-anion perovskite CH3NH3PbI3-x(BF4)x
33. Dependence of power conversion properties of hole-conductor-free mesoscopic perovskite solar cells on the loading of perovskite crystallites10.1016/j.orgel.2018.06.054 ↗
34. Ion migration in organometal trihalide perovskite and its impact on photovoltaic efficiency and stability10.1021/acs.accounts.5b00420 ↗
35. Anomalous photovoltaic effect in organic-inorganic hybrid perovskite solar cells10.1126/sciadv.1602164 ↗
36. Efficient, stable and flexible perovskite solar cells using two-step solution-processed SnO2 layers as electron-transport-material10.1016/j.orgel.2018.04.010 ↗
37. Efficient and stable planar hole-transport-material-free perovskite solar cells using low temperature processed SnO2 as electron transport material10.1016/j.orgel.2017.12.002 ↗
38. Degradation mechanisms of solution-processed planar perovskite solar cells: thermally stimulated current measurement for analysis of Carrier traps10.1002/adma.201502610 ↗