Synthesis and characterization of D-A-A type regular terpolymers with narrowed band-gap and their application in high performance polymer solar cells
Source abstract
Abstract
Abstract Two novel D-A-A type regular terpolymers of PBDT-DTQ and PIDT-DTQ were designed and synthesized, in which benzodithiophene and indacenodithiophene building blocks were employed as the D unit, and quinoxaline building block was introduced as the A unit. Owing to the strong intra-molecular charge transfer effect in polymer backbone, much broader absorption spectra covering from 320 to 800 nm with the narrowed band-gap were obtained for the developed D-A-A type polymers in contrast to their corresponding D-A type polymers. On the other hand, compared with PBDT-DTQ, PIDT-DTQ exhibited a deeper HOMO energy level and also higher charge carrier mobility. To investigate the photovoltaic properties of PBDT-DTQ and PIDT-DTQ in detail, bulk hetero-junction polymer solar cells with a structure of ITO/PEDOT: PSS/Active Layer/Ca/Al were fabricated. PBDT-DTQ-based solar cells exhibited a moderate PCE value of 3.84%, however, an increased J sc of 11.42 mA/cm 2 , V oc of 0.86 V and FF of 65.77% was achieved for PIDT-DTQ-based device, leading to the maximum PCE up to 6.41%. Our results here demonstrated that using the regular terpolymers as electron donor materials could be an efficient way to broaden the absorption of polymers and improve the photovoltaic performance of PSCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Polymer photovoltaic cells: enhanced efficiencies via a network of internal donor-acceptor hetero-junctions10.1126/science.270.5243.1789 ↗
2. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
3. Rational design of high performance conjugated polymers for organic solar cells10.1021/ma201648t ↗
4. Enhanced power conversion efficiency in polymer solar cells using an inverted device structure10.1038/nphoton.2012.190 ↗
5. Highly efficient 2D- conjugated benzodithiophene-based photovoltaic polymer with linear alkylthio side chain10.1021/cm501513n ↗
6. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
7. Donor–acceptor type low band gap polymers: polysquaraines and related systems10.1039/B204251G ↗
8. Recent development of push–pull conjugated polymers for bulk-heterojunction photovoltaics: rational design and fine tailoring of molecular structures10.1039/c2jm30470h ↗
9. Fluorine substitution enhanced photovoltaic performance of a D–A1–D–A2 copolymer10.1039/c3cc44931a ↗
10. Design of terpolymers as electron donors for highly efficient polymer solar cells10.1039/C4TA02426E ↗
11. Synthesis and photovoltaic properties of a donor-acceptor polymer containing both dithieno [3,2-b:2′,3′-d]pyrrole and fluorene as donor units10.1016/j.polymer.2012.09.013 ↗
12. High-molecular-weight regular alternating diketopyrrolopyrrole based terpolymers for efficient organic solar cells10.1002/anie.201302319 ↗
13. An alternating D–A1–D–A2 copolymer containing two electron-deficient moieties for efficient polymer solar cells10.1039/c3ta12321a ↗
14. For the bright future-bulk hetero-junction polymer solar cells with power conversion efficiency of 7.4%10.1002/adma.200903528 ↗
15. Synthesis, characterization and photovoltaic performances of D–A copolymers based on BDT and DBPz: the largely improved performance caused by additional thiophene blocks10.1039/c3ta01305g ↗
16. Manipulating backbone structure with various conjugated spacers to enhance photovoltaic performance of D–A-type two-dimensional copolymers10.1016/j.orgel.2014.08.022 ↗
17. Indacenodithiophene and quinoxaline-based conjugated polymers for highly efficient polymer solar cells10.1021/cm200316s ↗
18. Design and synthesis of copolymers of indacenodithiophene and naphtho[1,2-c:5,6-c]bis(1,2,5-thiadiazole) for polymer solar cells10.1021/ma400355w ↗
19. Narrow-band-gap conjugated polymers based on 2,7-dioctyl substituted dibenzo[a,c]phenazine derivatives for polymer solar cells10.1021/ma500333r ↗
20. An easily synthesized blue polymer for high performance polymer solar cells10.1002/adma.201002225 ↗
21. Enhanced photovoltaic performance of indaceno-dithiophene–quinoxaline copolymers by side-chain modulation10.1002/aenm.201400680 ↗
22. Significantly increasing open-circuit voltage of the benzo [1,2-b:4,5-b′]dithiophene-alt-5,8-dithienyl-quinoxaline copolymers based PSCs by appending dioctyloxy chains at 6,7-positions of quinoxaline10.1016/j.orgel.2014.11.021 ↗
23. Prominent short-circuit currents of fluorinated quinoxaline-based copolymer solar cells with a power conversion efficiency of 8.0%10.1021/cm302861s ↗
24. Effects of π-conjugated bridges on photovoltaic properties of donor-π-acceptor conjugated copolymers10.1021/ma202656b ↗
25. Application of two-dimensional conjugated benzo[1,2-b:4,5-b′]dithiophene in quinoxaline-based photovoltaic polymers10.1021/ma300060z ↗
26. Influence of D/A ratio on photovoltaic performance of a highly efficient polymer solar cell system10.1002/adma.201202719 ↗
27. Novel wide band-gap polymer utilizing fused hetero-aromatic unit for efficient polymer solar cells and field-effect transistors10.1016/j.polymer.2014.10.067 ↗
28. Molecular weight effect on the absorption, charge carrier mobility and photovoltaic performance of an indacenodiselenophene-based ladder-type polymer10.1021/cm401586t ↗
29. Synthesis of quinoxaline-based donor–acceptor narrow-band-gap polymers and their cyclized derivatives for bulk-heterojunction polymer solar cell applications10.1021/ma1027164 ↗
30. Highly efficient solar cell polymers developed via fine-tuning of structural and electronic properties10.1021/ja901545q ↗
31. Synthesis and photovoltaic performance of low band gap copolymers based on diketopyrrolopyrrole and tetra-thienoacene with different conjugated bridges10.1039/C3TA14022A ↗