A transition solvent strategy to print polymer:fullerene films using halogen-free solvents for solar cell applications
Source abstract
Abstract
AbstractInkjet printing is a mask-less non-contact deposition technique that is potentially suited for prototyping and manufacturing of thin-film polymer organic semiconductor devices from digital images. However new strategies are needed to achieve films with good macromorphology (i.e., high-fidelity footprint and uniform cross-section) and nanomorphology on unstructured substrates using a conventional ink-jet. Here we report a new transition solvent strategy to provide the desired film macromorphology and ultrafine nanomorphology in regioregular poly(3-hexylthiophene):phenyl-C61-butyric acid methyl ester (P3HT:PCBM) model films, without using chlorinated solvents. This strategy employs a good volatile solvent in combination with a miscible poor solvent that is much less volatile, which is the reverse of the usual low−high boiling-point solvent method. The good solvent suppresses premature aggregation in the ink head. Its removal by evaporation on the substrate leaves the poor solvent that triggers early π-stacking ordering and/or gelation of the polymer matrix that immobilizes the printed fluid on the substrate, suppressing both contact-line depinning and evaporation-induced solvent flow effects. The resultant donor–acceptor nanomorphology is further improved by vacuum drying at an optimal rate that avoids bubble formation. We have systematically characterized P3HT:PCBM films deposited with different solvents and platen temperatures to identify key macro- and nano-morphology determining processes. High-performance printed P3HT:PCBM solar cells were realized. These findings are applicable also to other printing and coating techniques based on low-viscosity inks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Nanomaterials and Printing Technologies · Organic Electronics and Photovoltaics · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Organic materials for printed electronics10.1038/nmat1817 ↗
2. Inkjet printing of polymers: state of the art and future developments10.1002/adma.200300385 ↗
3. All jet-printed polymer thin-film transistor active-matrix backplanes10.1063/1.1801673 ↗
4. An experimental study of drop-on-demand drop formation10.1063/1.2217929 ↗
5. Inkjet printing – the physics of manipulating liquid jets and drops
6. Inkjet printing-process and its applications10.1002/adma.200901141 ↗
7. Limits to feature size and resolution in inkjet printing10.1016/j.jeurceramsoc.2008.07.016 ↗
8. Inkjet printing of functional and structural materials: fluid property requirements, feature stability and resolution10.1146/annurev-matsci-070909-104502 ↗
9. A novel RGB multicolor light-emitting polymer display10.1016/S0379-6779(99)00322-7 ↗
10. Inkjet printing of polymeric field-effect transistors and Its applications10.1143/JJAP.44.3649 ↗
11. High photovoltaic performance of inkjet printed polymer: fullerene blends10.1002/adma.200700911 ↗
12. Printing highly efficient organic solar cells10.1021/nl801365k ↗
13. Polymer based organic solar cells using ink-jet printed active layers10.1063/1.2833185 ↗
14. Combinatorial screening of polymer: fullerene blends for organic solar cells by inkjet printing10.1002/aenm.201000027 ↗
15. Droplet behaviors on substrates in thin-film formation using inkjet printing10.1299/jsmeb.47.490 ↗
16. Inkjet printing of well-defined polymer dots and arrays10.1021/la049469o ↗
17. Ink-jet printing of polymers – from single dots to thin film libraries10.1039/b407478e ↗
18. Marangoni effect reverses coffee-ring depositions10.1021/jp0609232 ↗
19. Film formation from polymer solution using inkjet printing method10.1002/aic.11154 ↗
20. Dynamical visualization of “coffee stain phenomenon” in droplets of polymer solution via fluorescent microscopy10.1021/la8017858 ↗
21. Monolith formation and ring-stain suppression in low-pressure evaporation of poly(ethylene oxide) droplets10.1017/jfm.2012.22 ↗
22. Buckling instability induced by polymer solution drying10.1209/epl/i2003-00457-7 ↗
23. Formation and stability of liquid and molten beads on a solid surface10.1017/S0022112097005831 ↗
24. The stability of ink-jet printed lines of liquid with zero receding contact angle on a homogeneous substrate10.1017/S0022112002003117 ↗
25. Inkjet printing of narrow conductive tracks on untreated polymeric substrates10.1002/adma.200701876 ↗
26. Inkjet-printed line morphologies and temperature control of the coffee ring effect10.1021/la7026847 ↗
27. Inkjet printing narrow electrodes with <50 μm line width and channel length for organic thin-films transistors10.1063/1.3115830 ↗
28. Formation and stability of lines produced by inkjet printing10.1021/la101296e ↗
29. Interplay of processing, morphological order, and charge-carrier mobility in polythiophene thin films deposited by different methods: comparison of spin-cast, drop-cast, and inject-printed films10.1021/la1013494 ↗
30. Role of borderline solvents to induce pronounced extended-chain lamellar order in π-stackable polymers10.1021/ma201165y ↗
31. Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols10.1038/nmat1928 ↗
32. High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends10.1038/nmat1500 ↗
33. Charge transport and photocurrent generation in poly(3-hexylthiophene): methanofullerene bulk heterojunction solar cells10.1002/adfm.200500420 ↗
34. The effect of active layer thickness and composition on the performance of bulk-heterojunction solar cells10.1063/1.2360780 ↗
35. A strong regioregularity effect in self-organizing conjufated polymer films and high-efficiency polythiophene: fullerene solar cells10.1038/nmat1574 ↗
36. Polymer: fullerene bulk-heterojunction solar cells10.1002/adma.200801283 ↗
37. Inkjet printed solar cell active layers prepared from chlorine-free solvent systems10.1016/j.solmat.2012.10.011 ↗
38. High stability ultrathin spin-on benzocyclobutene gate dielectric for polymer field-effect transistors10.1063/1.1710716 ↗
39. Injection-induced de-doping in a conducting polymer during device operation: asymmetry in the hole injection and extraction rates10.1002/adma.200700086 ↗
40. Jettable fluid space and jetting characteristics of a microprint head10.1017/jfm.2012.440 ↗
41. Direct spectroscopic evidence for a photodoping mechanism in polythiophene and poly(bithiophene-alt-thienothiophene) organic semiconductor thin films involving oxygen and sorbed moisture10.1002/adma.200901120 ↗
42. Solvent effects on chain orientation and interface pi-interaction in conjugated polymer thin fims: direct measurements of the air and substrate interfaces by near-edge x-ray absorption spectroscopy10.1002/adma.200601285 ↗
43. Thermochromism and solvatochromism effects in poly(3-hexylthiophene)10.1016/0379-6779(88)90110-5 ↗
44. Thermochromism in polyalkylthiophenes: molecular aspects from vibrational spectroscopy10.1063/1.460593 ↗
45. Capillary flow as the cause of ring stains from dried liquid drops10.1038/39827 ↗
46. Evaporation rates of pure hydrocarbon liquids under the influences of natural convection and diffusion10.1016/j.ijheatmasstransfer.2009.01.015 ↗
47. Viscosity and acoustic behavior of ceramic suspensions optimized for phase-change ink-jet printing10.1111/j.1551-2916.2005.00138.x ↗
48. Geometric control of inkjet printed features using a gelating polymer10.1039/B612158F ↗
49. Inkjet printing of wax-based alumina suspensions10.1111/j.1151-2916.2001.tb01045.x ↗
50. Role of intermolecular coupling in the photophysics of disordered organic semiconductors: aggregate emission in regioregular polythiophene10.1103/PhysRevLett.98.206406 ↗
51. Film formation properties of inkjet printed poly(phenyl-ethynylene)-poly(phenylene-vinylene)s10.1016/j.tsf.2011.01.274 ↗
52. Shape changes during the drying of droplets of suspensions10.1021/la703484w ↗
53. The solubility of nitrogen and air in liquids10.1063/1.555713 ↗
54. Bubble dynamics and cavitation10.1146/annurev.fl.09.010177.001045 ↗
55. Investigation of ink-jet printing of poly(3-octylthiophene) for organic field-effect transistors from different solutions10.1016/j.synthmet.2004.05.034 ↗
56. High performance organic semiconducting thin films: inkjet printed polythiophene [rr-P3HT]10.1016/S1566-1199(01)00011-8 ↗
57. The drying behaviour of conjugated polymer solutions10.1016/S0379-6779(03)00186-3 ↗
58. Spin-cast bulk heterojunction solar cells: a dynamical investigation10.1002/adma.201203440 ↗
59. P3HT/PCBM bulk heterojunction organic photovoltaics: correlating efficiency and morphology10.1021/nl103482n ↗
60. X-ray structural studies of poly(3-alkylthiophenes): an example of an inverse comb10.1021/ma00043a019 ↗
61. High internal quantum efficiency in fullerene solar cells based on crosslinked polymer donor networks10.1038/ncomms2211 ↗