journal article·2011-12

Solvent effects on ZnPc thin films and their role in fabrication of nanostructured organic solar cells

Jaron G. Van Dijken, Michael D. Fleischauer, Michael J. Brett

Organic Electronics· Volume 12· Issue 12
Publisher page

Abstract

Abstract Fabrication of interdigitated organic photovoltaic (OPV) devices commonly involves filling a nanostructured thin film using solution-based methods. In these cases, the sensitivity of the nanostructured films to the solvents used needs to be studied in order to optimize the interface. Here, we study the ability of chlorobenzene (CB) and dichlorobenzene (DCB) to dissolve and recrystallize zinc phthalocyanine (ZnPc) thin films, while fabricating interdigitated active layers composed of ZnPc and [6,6]-phenyl-C61 butyric acid methyl ester (PCBM). Using glancing angle deposition (GLAD), we are able to construct slanted nanorod arrays of ZnPc, with nanorod diameters of nominally 40 nm and lengths up to 450 nm. We find that these films are recrystallized upon direct exposure to CB and DCB, regardless of initial morphology, yielding a variety of possible nanoscale formations. The crystallinity and absorbance of these recrystallized films changes as well, depending on solvent choice and exposure time. Through control of initial ZnPc film morphology and solvent choice for PCBM casting, we exploit the sensitivity of ZnPc to these organic solvents to optimize the photovoltaic performance of ZnPc/PCBM devices. Optimal OPV device performance is achieved with a 30 nm thick GLAD-textured ZnPc film while using DCB as the PCBM solvent. In this case, power conversion efficiencies are up to 3.0%, compared to an average of 2.3% when using CB as the solvent on the same film, and 2.3% also for bilayer devices when using DCB as the solvent. A higher degree of material mixing at the ZnPc/PCBM interface is shown when using DCB over CB as the PCBM solvent, which may be the primary mechanism for the photovoltaic improvements seen in these devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Optical Coatings and Gratings · Thin-Film Transistor Technologies · Photonic Crystals and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
2. Controlled growth of a molecular bulk heterojunction photovoltaic cell10.1038/nmat1285 ↗
3. Efficient tandem polymer solar cells fabricated by all-solution processing10.1126/science.1141711 ↗
4. Polymer solar cells with enhanced open-circuit voltage and efficiency10.1038/nphoton.2009.192 ↗
5. Business market and intellectual property analysis of polymer solar cells10.1016/j.solmat.2010.04.074 ↗
6. Efficient bulk heterojunction photovoltaic cells using small-molecular-weight organic thin films10.1038/nature01949 ↗
7. A hybrid planar–mixed molecular heterojunction photovoltaic cell10.1002/adma.200400617 ↗
8. Graded donor-acceptor heterojunctions for efficient organic photovoltaic cells10.1002/adma.201002454 ↗
9. The influence of substrate heating on morphology and layer growth in C(60):ZnPc bulk heterojunction solar cells10.1016/j.orgel.2010.12.007 ↗
10. Zinc phthalocyanine - Influence of substrate temperature, film thickness, and kind of substrate on the morphology10.1016/j.tsf.2011.01.356 ↗
11. Organic photovoltaic cells based on solvent-annealed textured titanyl phthalocyanine/C60 heterojunctions10.1002/adfm.200801723 ↗
12. Planar and textured heterojunction organic photovoltaics based on chloroindium phthalocyanine (ClInPc) versus titanyl phthalocyanine (TiOPc) donor layers10.1016/j.orgel.2010.11.015 ↗
13. Improvement of efficiency in solar cells based on vertically grown copper phthalocyanine nanorods10.1088/0022-3727/43/24/245101 ↗
14. Facile method for fabrication of nanostructured cupcthin films to enhance photocurrent generation10.1021/jp8080673 ↗
15. Formation of organic crystalline nanopillar arrays and their application to organic photovoltaic cells10.1021/am100915s ↗
16. Morphology control of CuPc thin films using glancing angle deposition
17. Organic photovoltaic cells with vertically aligned crystalline molecular nanorods10.1016/j.orgel.2009.08.009 ↗
18. Tilted bulk heterojunction organic photovoltaic cells grown by oblique angle deposition10.1063/1.3236838 ↗
19. Controlled nanostructuring of CuPc thin films via glancing angle deposition for idealized organic photovoltaic architectures10.1039/C0JM03026K ↗
20. Solution-processed squaraine bulk heterojunction photovoltaic cells10.1021/nn100195j ↗
21. Charge transfer reactions in near IR absorbing small molecule solution processed organic bulk-heterojunction solar10.1016/j.orgel.2010.11.014 ↗
22. Donor–acceptor conjugates-functionalized zinc phthalocyanine: Towards broad absorption and application in organic solar cells10.1016/j.solmat.2010.05.050 ↗
23. Solvation-induced morphology effects on the performance of polymer-based photovoltaic devices10.1002/1616-3028(200112)11:6<420::AID-ADFM420>3.0.CO;2-K ↗
24. Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells10.1002/adfm.200305026 ↗
25. A new class of semiconducting polymers for bulk heterojunction solar cells with exceptionally high performance10.1021/ar1000296 ↗
26. Chiral sculptured thin films10.1038/384616a0 ↗
27. Sculptured thin films and glancing angle deposition: Growth mechanics and applications10.1116/1.580562 ↗
28. Nanostructure engineering in porous columnar thin films: recent advances10.1007/s10854-006-9049-8 ↗
29. Glancing angle deposition: fabrication, properties, and applications of micro- and nanostructured thin films10.1116/1.2764082 ↗
30. Periodically structured glancing angle deposition thin films10.1109/TNANO.2004.842061 ↗
31. Morphology of periodic nanostructures for photonic crystals grown byglancing angle deposition10.1016/j.photonics.2005.11.003 ↗
32. M.A. Summers, M.J. Brett, Optimization of periodic column growth inglancing angle deposition for photoniccrystal fabrication, Nanotechnology 19(2008) 415203.10.1088/0957-4484/19/41/415203 ↗
33. Correlation of hole mobility, exciton diffusion length, and solar cell characteristics in phthalocyanine/fullerene organic solar cells10.1063/1.2711525 ↗
34. Photocurrent generation in nanostructured organic solar cells10.1021/nn700447t ↗
35. Conjugated macrocycles. Part XXXII10.1039/jr9610000866 ↗
36. C.C. Leznoff, A.B.P. Lever (Eds.), Phthalocyanines: Properties and Applications, VCH: New York, 1989, 1993, 1996, Vols 1–4.
37. Organic photovoltaic devices based on water-soluble copper phthalocyanine10.1021/jp109544m ↗
38. Metal complexes of phthalocyanines in polymers as suitable materials for optical limiting10.1002/masy.200650302 ↗
39. Photophysical studies of zinc phthalocyanine and chloroaluminum phthalocyanine incorporated into liposomes in the presence of additives10.1590/S0100-879X2004000200016 ↗
40. Zinc phthalocyanine hierarchical nanostructure with hollow interior space: solvent-thermal synthesis and high visible photocatalytic property10.1016/j.jcis.2010.04.035 ↗
41. What determines the performance of metal phthalocyanines (MPc, MZn, Cu, Ni, Fe) in organic heterojunction solar cells? A combined experimental and theoretical investigation10.1016/j.orgel.2009.11.016 ↗
42. Effect of blend layer morphology on performance of ZnPc:C60 -based photovoltaic cells10.1063/1.3493177 ↗
43. Efficient organic solar cells using a high-quality crystalline thin film as a donor layer10.1002/adma.200903023 ↗
44. A comparative study on the performances of small molecule organic solar cells based on CuPc/C(60) and CuPc/C(70)10.1016/j.solmat.2010.08.008 ↗
45. Bulk heterojunction solar cells with internal quantum efficiency approaching 100%10.1038/nphoton.2009.69 ↗
46. Stability/degradation of polymer solar cells10.1016/j.solmat.2008.01.005 ↗
47. Stability of the interface between indium-tin-oxide and poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) in polymer light-emitting diodes10.1063/1.1315344 ↗
48. Performance and stability of electroluminescent device with self-assembled layers of poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonate) and polyelectrolytes10.1016/j.tsf.2005.08.174 ↗