journal article·2020-01

Facile method for the preparation of high-performance photodetectors with a GQDs/perovskite bilayer heterostructure

Hassan Algadi, Chandreswar Mahata, Bichitra Sahoo, Minsu Kim, Won-Gun Koh, Taeyoon Lee

Publisher page

Abstract

Abstract A high-performance nitrogen doped graphene quantum dots (GQDs)/all-inorganic (CsPbBr3) perovskite nanocrystals (NCs) heterostructure photodetector was fabricated on a quartz substrate, using the low cost spin coating technique followed by hot plate annealing. The GQDs/CsPbBr3 NCs heterostructure photodetector exhibits a high overall performance with a photoresponsivity of 0.24 AW−1, on/off ratio of 7.2 × 104, and specific detectivity of up to 2.5 × 1012 Jones. The on/off ratio of the hybrid device was improved by almost ten orders of magnitude, and the photoresponsivity was enhanced almost three times compared to the single layer perovskite NCs photodetector. The performance enhancement of the hybrid device was due to its highly efficient carrier separation at the GQDs/CsPbBr3 NCs interface. This results from the coupling of the GQDs layer, which efficiently extracts and transports the photogenerated carriers, with the CsPbBr3 NCs layer, which has a large absorption coefficient and high quantum efficiency. The interfacial charge transfer from the CsPbBr3 NCs to the GQDs layer was demonstrated by the quenching in the photoluminescence (PL) spectra, and the fast-average decay time in the time-resolved photoluminescence (Trpl) spectra of the hybrid photodetector. Moreover, the performance-enhancement mechanism of the hybrid GQDs/CsPbBr3 photodetector was elucidated by analyzing the band alignment of the GQDs and CsPbBr3 under laser illumination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Quantum Dots Synthesis And Properties · 2D Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Graphene photonics and optoelectronics10.1038/nphoton.2010.186 ↗
2. Effect of nitrogen doping on the structural and the optical variations of graphene quantum dots by using hydrazine treatment10.3938/jkps.67.746 ↗
3. Molecularly designed, nitrogen-functionalized graphene quantum dots for optoelectronic devices10.1002/adma.201600058 ↗
4. Tuning the photoluminescence of graphene quantum dots through the charge transfer effect of functional10.1021/nn304675g ↗
5. Carbon and graphene quantum dots for optoelectronic and energy devices: a review10.1002/adfm.201501250 ↗
6. Graphene quantum dots: an emerging material for energy-related applications and beyond10.1039/c2ee22982j ↗
7. Solution-processed graphene quantum dot deep-UV photodetectors10.1021/acsnano.5b00437 ↗
8. Deep ultraviolet to near-infrared emission and photoresponse in layered n-doped graphene quantum dots10.1021/nn501796r ↗
9. High-performance graphene-quantum-dot photodetectors
10. Graphene/nitrogen-functionalized graphene quantum dot hybrid broadband photodetectors with a buffer layer of boron nitride nanosheets10.1039/C6NR07707B ↗
11. Highly responsive MoS2photodetectors enhanced by graphene quantum dots
12. Highly Enhanced Photoresponsivity of a Monolayer WSe2Photodetector with nitrogen-doped graphene quantum dots10.1021/acsami.7b18419 ↗
13. Organometal halide perovskites as visible- light sensitizers for photovoltaic cells10.1021/ja809598r ↗
14. Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells10.1126/science.aan2301 ↗
15. Fully textured monolithic perovskite/silicon tandem solar cells with 25.2% power conversion efficiency10.1038/s41563-018-0115-4 ↗
16. Thin film perovskite light-emitting diode based on CsPbBr3powders and interfacial engineering10.1016/j.nanoen.2017.05.005 ↗
17. Air-stable all inorganic green perovskite light emitting diodes based on ZnO/CsPbBr3/NiO heterojunction structure10.1016/j.ceramint.2017.12.048 ↗
18. Efficient and stable pure green all-inorganic perovskite CsPbBr3 light-emitting diodes with a solution-processed nioxinterlayer10.1021/acs.jpcc.7b11518 ↗
19. High-performance perovskite photodetectors based on solution-processed all-inorganic CsPbBr3thin films10.1039/C7TC02137B ↗
20. Photo-stability of CsPbBr3 perovskite quantum dots for optoelectronic application10.1007/s40843-016-5123-1 ↗
21. Enhanced photoresponse of self-powered perovskite photodetector based on ZnO nanoparticles decorated CsPbBr3films10.1016/j.solmat.2017.08.014 ↗
22. High detectivity and rapid response in perovskite CsPbBr3single-crystal photodetector10.1021/acs.jpcc.7b01171 ↗
23. High-performance self-powered perovskite photodetector with a rapid photoconductive response10.1039/C6RA18453G ↗
24. Bandgap tunable Cs x (CH 3 NH 3) 1−x PbI 3 perovskite nanowires by aqueous solution synthesis for optoelectronic devices10.1039/C6NR06636D ↗
25. The electrical and optical properties of organometal halide perovskites relevant to optoelectronic performance10.1002/adma.201700764 ↗
26. Electron-hole diffusion lengths > 175 um in solution-grown CH 3 NH 3 PbI 3 single crystals10.1126/science.aaa5760 ↗
27. High charge carrier mobilities and lifetimes in organolead trihalide perovskites10.1002/adma.201305172 ↗
28. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals10.1126/science.aaa2725 ↗
29. Micropatterned 2D hybrid perovskite thin films with enhanced photoluminescence lifetimes10.1021/acsami.8b02236 ↗
30. Spray-cast multilayer perovskite solar cells with an active-area of 1.5 cm210.1038/s41598-017-08642-2 ↗
31. Ultrasensitivity broadband photodetectors based on perovskite: Research on film crystallization and electrode optimization10.1007/BF00615135 ↗
32. High-performance formamidinium-based perovskite photodetectors fabricated via doctor-blading deposition in ambient condition
33. Monolayer and few-layer all-inorganic perovskites as a new family of two-dimensional semiconductors for printable optoelectronic devices10.1002/adma.201600225 ↗
34. Highly stable and flexible photodetector arrays based on low dimensional CsPbBr3 microcrystals and on-paper pencil-drawn electrodes10.1039/C7TC02108A ↗
35. Terahertz conductivity within colloidal CsPbBr3 perovskite nanocrystals: remarkably high carrier mobilities and large diffusion lengths10.1021/acs.nanolett.6b01168 ↗
36. High-efficiency and air-stable perovskite quantum dots light-emitting diodes with an all-inorganic heterostructure
37. Highly dynamic ligand binding and light absorption coefficient of cesium lead bromide perovskite nanocrystals10.1021/acsnano.5b06295 ↗
38. Inorganic caesium lead iodide perovskite solar cells10.1039/C5TA06398A ↗
39. Methylammonium lead iodide perovskite-graphene hybrid channels in flexible broadband phototransistors10.1016/j.carbon.2016.04.060 ↗
40. Microengineered CH 3 NH 3 PbI 3 nanowire/graphene phototransistor for low-intensity light detection at room temperature10.1002/smll.201501257 ↗
41. Heterostructured WS 2/CH 3 NH 3 PbI 3 Photoconductors with suppressed dark current and enhanced photodetectivity10.1002/adma.201600069 ↗
42. Hybrid bilayer WSe 2 -CH 3 NH 3 PbI 3 organolead halide perovskite as a high-performance photodetector10.1002/anie.201603557 ↗
43. High-performance perovskite-graphene hybrid photodetector
44. Hybrid graphene-perovskite phototransistors with ultrahigh responsivity and gain10.1002/adom.201500150 ↗
45. High performance hybrid graphene–CsPbBr 3−x I x perovskite nanocrystal photodetector10.1039/C6RA08699C ↗
46. Plasmonic-enhanced perovskite-graphene hybrid photodetectors10.1039/C5NR08677A ↗
47. All-inorganic perovskite quantum dot/mesoporous TiO2 composite-based photodetectors with enhanced performance10.1039/C6DT04758K ↗
48. TiO2 nanocrystal/perovskite bilayer for high-performance photodetectors10.1002/aelm.201700251 ↗
49. Insight into the effect of ligand-exchange on colloidal CsPbBr3 perovskite quantum dot/mesoporous-TiO2 composite-based photodetectors: much faster electron injection10.1039/C7TC01611E ↗
50. Solution-processed MoS 2/Organolead trihalide perovskite photodetectors
51. Graphene quantum dot incorporated perovskite films: passivating grain boundaries and facilitating electron extraction10.1039/C6CP06953C ↗
52. Efficiency enhancement of perovskite solar cells through fast electron extraction: the role of graphene quantum dots10.1021/ja4132246 ↗
53. Improving all-inorganic perovskite photodetectors by preferred orientation and plasmonic effect10.1002/smll.201602366 ↗
54. Deep ultraviolet to near-infrared emission and photoresponse in layered N-doped graphene quantum dots10.1021/nn501796r ↗
55. Photoluminescence mechanism in graphene quantum dots: quantum confinement effect and surface/edge state10.1016/j.nantod.2016.12.006 ↗
56. CsPbBr_3 perovskite quantum dots: saturable absorption properties and passively Q-switched visible lasers10.1364/PRJ.5.000457 ↗
57. The influence of DMSO and ether via fast-dipping treatment for a perovskite solar cell10.1016/j.solmat.2017.10.024 ↗
58. Ko · 2018 · vol. 183 · 157
59. Dual-step thermal engineering technique: a new approach for fabrication of efficient CH3NH3PbI3-based perovskite solar cell in open air condition10.1016/j.solmat.2018.05.027 ↗
60. High-performance all-inorganic CsPbCl3 perovskite nanocrystal photodetectors with superior stability