Factors contributing to degradation of organic photovoltaic cells
Source abstract
Abstract
Abstract The performance of organic photovoltaic (OPV) cells has considerably improved over the past decade, and now exceeds an energy conversion efficiency of 10%, the benchmark for practical use. One factor contributing to this increase is the development of π-conjugated linear acceptor molecules as alternatives to fullerene derivatives. Although conversion efficiency is an important issue for practical applications, device stability is also necessary for commercialization of OPV technologies. To date, long-term stability has been examined in OPV devices based on fullerenes. However, the factors involved in performance degradation remain poorly understood. It is difficult to address this problem because of the multilayer nature of the devices and many factors involved in degradation. In recent OPV devices based on π-conjugated molecules as acceptors, there have been few reports on stability under continuous light irradiation. Ensuring the stability of the π-conjugated molecules under illumination and electrical operation is critical for achieving practical use of OPV devices. In this paper, we comprehensively analyzed OPV devices based on EH-IDTBR as an acceptor material. We identified a decrease in OPV performance of approximately 50% under 100-h light irradiation, which we attribute to increased resistance of the organic semiconductor layer. The increase in resistance was caused by a decrease in the number of carriers, suggesting that structural changes in the EH-IDTBR molecule are an important factor affecting degradation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Semiconductor materials and interfaces
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Single-junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
2. Progress in non-fullerene acceptor based organic solar cells10.1016/j.solmat.2018.12.033 ↗
3. Next-generation organic photovoltaics based on non-fullerene acceptors10.1038/s41566-018-0104-9 ↗
4. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
5. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
6. Burn-in free nonfullerene-based organic solar cells10.1002/aenm.201700770 ↗
7. Photostability of fullerene and non-fullerene polymer solar cells: the role of the acceptor10.1021/acsami.8b20493 ↗
8. Stability of polymer solar cells10.1002/adma.201104187 ↗
9. Progress in understanding degradation mechanisms and improving stability in organic photovoltaics10.1002/adma.201603940 ↗
10. Compatibility of PTB7 and [70]PCBM as a key factor for the stability of PTB7:[70]PCBM solar cells10.1002/aenm.201502338 ↗
11. The effect of polymer solubilizing side-chains on solar cell stability10.1039/C5CP01158B ↗
12. Morphological stability and performance of polymer–fullerene solar cells under thermal stress: the impact of photoinduced PC60BM oligomerization10.1021/nn404687s ↗
13. Effect of PCBM on the photodegradation kinetics of polymers for organic photovoltaics10.1021/cm302623p ↗
14. Performance enhancement of fullerene-based solar cells by light processing10.1038/ncomms3227 ↗
15. Enhancing fullerene-based solar cell lifetimes by addition of a fullerene dumbbell10.1002/anie.201407310 ↗
16. Enhancing the thermal stability of polythiophene:fullerene solar cells by decreasing effective polymer regioregularity10.1021/ja064434r ↗
17. The mechanism of burn-in loss in a high efficiency polymer solar cell10.1002/adma.201103010 ↗
18. Photoinduced degradation of polymer and polymer–fullerene active layers: experiment and theory10.1002/adfm.201001079 ↗
19. Morphological and electrical control of fullerene dimerization determines organic photovoltaic stability10.1039/C5EE02912K ↗
20. Highly durable inverted-type organic solar cell using amorphous titanium oxide as electron collection electrode inserted between ITO and organic layer10.1016/j.solmat.2008.06.012 ↗
21. Inverted type bulk-heterojunction organic solar cell using electrodeposited titanium oxide thin films as electron collector electrode10.1016/j.tsf.2008.12.039 ↗
22. Inverted bulk-heterojunction organic solar cell using chemical bath deposited titanium oxide as electron collection layer10.1016/j.orgel.2010.04.008 ↗
23. Nanopore analysis of blended organic semiconducting films to clarify photovoltaic performance10.1016/j.orgel.2018.12.021 ↗
24. Characterization of inverted-type organic solar cells with a ZnO layer as the electron collection electrode by ac impedance spectroscopy10.1021/am900446x ↗
25. Flexible inverted polymer solar cells on polyethylene terephthalate substrate containing zinc oxide electroncollection-layer prepared by novel sol–gel method and low-temperature treatments10.1016/j.orgel.2012.03.015 ↗