journal article·2018-11

Ternary blend organic solar cells with a non-fullerene acceptor as a third component to synergistically improve the efficiency

Cheng Xu, Matthew Wright, Duanlei Ping, Haimang Yi, Xueyun Zhang, M.D. Arafat Mahmud, Kaiwen Sun, Mushfika Baishakhi Upama, Faiazul Haque, Ashraf Uddin

Publisher page

Abstract

Abstract Ternary blends, where an additional component is added to a donor/acceptor blend, represent a promising route to improve upon the performance of organic solar cells. Non-fullerene acceptor materials are particularly suited for this application due to their relatively stronger absorption coefficients and tuneable molecular energy levels. This paper demonstrates a ternary blend solar cell by incorporating a promising non-fullerene acceptor, IDFBR, into a PffBT4T-2OD:PC71BM blend. The addition of IDFBR to this blend leads to the formation of a cascading energy band structure in the device, which is required for the operation of an efficient ternary system. Ternary blend solar cells with an IDFBR concentration of 5 wt% demonstrated improved photovoltaic performance, when compared to the host binary blends. This improved performance was attributed to a reduction in energetic disorder and improved charge carrier transport in the ternary blend.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Solar cells with one-day energy payback for the factories of the future10.1039/C1EE02728J ↗
2. Performance improvement of low bandgap polymer bulk heterojunction solar cells by incorporating P3HT10.1016/j.orgel.2014.08.018 ↗
3. High performance semitransparent organic solar cells with 5% PCE using non-patterned MoO3/Ag/MoO3 anode10.1016/j.cap.2016.12.010 ↗
4. High-efficiency semitransparent organic solar cells with non-fullerene acceptor for window application10.1021/acsphotonics.7b00618 ↗
5. New insight of molecular interaction, crystallization and phase separation in higher performance small molecular solar cells via solvent vapor annealing10.1016/j.nanoen.2016.10.031 ↗
6. Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology10.1002/adfm.200500211 ↗
7. Over 14% efficiency in organic solar cells enabled by chlorinated nonfullerene small-molecule acceptors10.1002/adma.201800613 ↗
8. Material and energy intensity of fullerene production10.1021/es103860a ↗
9. Polymer donor–polymer acceptor (all-polymer) solar cells10.1016/j.mattod.2013.04.005 ↗
10. Non-fullerene acceptors for organic photovoltaics: an emerging horizon10.1039/C4MH00042K ↗
11. Oligomer molecules for efficient organic photovoltaics10.1021/acs.accounts.5b00363 ↗
12. Organic non-fullerene acceptors for organic photovoltaics10.1039/c0ee00668h ↗
13. Marks, imide- and amide-functionalized polymer semiconductors10.1021/cr500225d ↗
14. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
15. A thieno[3,4-b]thiophene-based non-fullerene electron acceptor for high-performance bulk-heterojunction organic solar cells10.1021/jacs.6b08523 ↗
16. Reduced voltage losses yield 10% efficient fullerene free organic solar cells with >1 V open circuit voltages10.1039/C6EE02598F ↗
17. High-efficiency and air-stable P3HT-based polymer solar cells with a new non-fullerene acceptor10.1038/ncomms11585 ↗
18. Investigation of charge Carrier behavior in high performance ternary blend polymer solar cells10.1002/aenm.201600637 ↗
19. Ternary organic solar cells based on two compatible nonfullerene acceptors with power conversion efficiency >10%10.1002/adma.201602570 ↗
20. Ternary‐blend polymer solar cells combining fullerene and nonfullerene acceptors to synergistically boost the photovoltaic performance10.1002/adma.201603588 ↗
21. Small‐Molecule solar cells with simultaneously enhanced short‐circuit current and fill factor to achieve 11% efficiency
22. High-performance ternary nonfullerene polymer solar cells with both improved photon harvesting and device stability10.1021/acsami.8b06822 ↗
23. Efficient ternary polymer solar cells with a shelf-life stability for longer than 410 days10.1016/j.solmat.2018.04.014 ↗
24. Highly efficient ternary‐blend polymer solar cells enabled by a nonfullerene acceptor and two polymer donors with a broad composition tolerance10.1002/adma.201704271 ↗
25. Synergistic effect of polymer and small molecules for high‐performance ternary organic solar cells10.1002/adma.201404902 ↗
26. Regulating the vertical phase distribution by fullerene-derivative in high performance ternary organic solar cells10.1016/j.nanoen.2018.01.040 ↗
27. Ternary-blend polymer solar cells combining fullerene and nonfullerene acceptors to synergistically boost the photovoltaic performance10.1002/adma.201603588 ↗
28. Fullerene for organic electronics10.1039/b900402p ↗
29. Ternary solar cells with a mixed face-on and edge-on orientation enable an unprecedented efficiency of 12.1%10.1039/C6EE02851A ↗
30. Efficient ternary organic photovoltaic cells with better trade-off photon harvesting and phase separation by doping DIB-SQ10.1039/C6TC02001A ↗
31. Complementary absorbing star-shaped small molecules for the preparation of ternary cascade energy structures in organic photovoltaic cells10.1002/adfm.201201913 ↗
32. Ternary nonfullerene polymer solar cells with 12.16% efficiency by introducing one acceptor with cascading energy level and complementary absorption
33. Charge transfer state energy in ternary bulk-heterojunction polymer–fullerene solar cells10.1117/1.JPE.5.057203 ↗
34. Simultaneous improvement in short circuit current, open circuit voltage, and fill factor of polymer solar cells through ternary strategy10.1021/acsami.5b00308 ↗
35. Efficient ternary blend polymer solar cells with indene-C60 bisadduct as an electron-cascade acceptor10.1039/c3ee44202k ↗
36. Origin of the tunable open-circuit voltage in ternary blend bulk heterojunction organic solar cells10.1021/ja3112143 ↗
37. Simultaneous enhancement of short-circuit current density, open circuit voltage and fill factor in ternary organic solar cells based on PTB7-Th:IT-M:PC71BM10.1016/j.solmat.2018.03.014 ↗
38. Ternary polymer solar cells based on two acceptors and one donor for achieving 12.2% efficiency10.1002/adma.201604059 ↗
39. Achieving high-performance ternary organic solar cells through tuning acceptor alloy10.1002/adma.201603154 ↗
40. Reducing the efficiency–stability–cost gap of organic photovoltaics with highly efficient and stable small molecule acceptor ternary solar cells10.1038/nmat4797 ↗
41. Ternary system with controlled structure: a new strategy toward efficient organic photovoltaics
42. 11% efficient ternary organic solar cells with high composition tolerance via integrated near‐IR sensitization and interface engineering10.1002/adma.201602834 ↗
43. High-efficiency and air stable fullerene-free ternary organic solar cells10.1016/j.nanoen.2017.12.050 ↗
44. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
45. Aggregation and morphology control enables multiple cases of high-efficiency polymer solar cells10.1038/ncomms6293 ↗
46. Ternary polymer solar cells based on two acceptors and one donor for achieving 12.2% efficiency
47. Ternary nonfullerene polymer solar cells with 12.16% efficiency by introducing one acceptor with cascading energy level and complementary absorption
48. Simultaneous enhancement of short-circuit current density, open circuit voltage and fill factor in ternary organic solar cells based on PTB7-Th:IT-M:PC 71 BM10.1016/j.solmat.2018.03.014 ↗
49. High performance ternary organic solar cells due to favored interfacial connection by a non-fullerene electron acceptor with cross-like molecular geometry10.1021/acs.jpcc.8b03013 ↗
50. Ternary blend polymer solar cells with enhanced power conversion efficiency10.1038/nphoton.2014.172 ↗
51. A new nonfullerene acceptor with near infrared absorption for high performance ternary‐blend organic solar cells with efficiency over 13%10.1002/advs.201800307 ↗
52. High open-circuit voltage ternary organic solar cells based on ICBA as acceptor and absorption-complementary donors10.1039/C6QM00308G ↗
53. Beyond 11% efficient sulfide kesterite Cu2ZnxCd1–xSnS4 solar cell: effects of cadmium alloying10.1021/acsenergylett.7b00129 ↗
54. A study of the optical bandgap energy and Urbach tail of spray-deposited CdS:In thin films10.1016/j.jmrt.2013.02.012 ↗
55. Photothermal bending spectroscopy and photothermal deflection spectroscopy of C60 thin films10.1016/S0169-4332(96)00776-3 ↗
56. Thick-film high-performance bulk-heterojunction solar cells retaining 90% PCEs of the optimized thin film cells10.1002/aelm.201700007 ↗
57. Role of defects in tailoring structural, electrical and optical properties of ZnO10.1016/j.pmatsci.2008.07.002 ↗
58. Uncovering the role of cathode buffer layer in organic solar cells10.1038/srep07803 ↗
59. Photo-degradation of high efficiency fullerene-free polymer solar cells10.1039/C7NR06151J ↗
60. Interfacial engineering of electron transport layer using Caesium Iodide for efficient and stable organic solar cells10.1016/j.apsusc.2017.04.164 ↗
61. Highly efficient regular polymer solar cells based on Li-TFSI doping ZnO as electron-transporting interlayers10.1016/j.solener.2018.04.018 ↗
62. Investigation of deformed TiO2 aggregates doped TiO2 nanoparticles photoanode applied for dye-sensitized solar cells