Dithienopyrrole-benzodithiophene based donor materials for small molecular BHJSCs: Impact of side chain and annealing treatment on their photovoltaic properties
Source abstract
Abstract
Abstract Two small molecular organic materials denoted as ICT1 and ICT2 with A-D1-D2-D1-A architecture have been synthesized and their thermal, photo-physical, electrochemical and photovoltaic properties are explored. Synthesized materials have n-butylrhodanine acceptor (A), dithienopyrrole (DTP) (D1) and benzodithiophene (BDT) (D2) (Alkoxy BDT and alkylthiophene BDT, respectively for ICT1 and ICT2) donor moieties. Both the materials have good solubility (up to 25 mg/mL) in most common organic solvents and have excellent thermal stability with the decomposition temperature (Td) as 348 and 382 °C, respectively for ICT1 and ICT2. Both ICT1 and ICT2 have broad and intense visible region absorption (molar excitation coefficient is 1.71 × 105 and 1.65 × 105 mol−1 cm−1, respectively for ICT1 and ICT2) and have suitable HOMO and LUMO energy levels for PC71BM acceptor. Bulk heterojunction solar cells with ITO/PEDOT:PSS/blend/Al structure are fabricated using these materials. The BHJSCs fabricated by spin cast of ICT1:PC71BM and ICT2:PC71BM (1:2 wt ratio) blend from chloroform showed power conversion efficiency (PCE) of 2.77% (Jsc = 6.84 mA/cm2, Voc = 0.92 V and FF = 0.44) and 3.27% (Jsc = 7.26 mA/cm2, Voc = 0.96 V and FF = 0.47), respectively. Annealing the active layer significantly improved the PCE of these BHJSCs to 5.12% (Jsc = 10.15 mA/cm2, Voc = 0.87 V and FF = 0.58) and 5.90% (Jsc = 10.68 mA/cm2, Voc = 0.92 V and FF = 0.60), respectively for ICT1 and ICT2 donors. The enhancement in the PCE is due to higher light harvesting ability of the active layer, better nanoscale morphology for efficient and balanced charge transport and effective exciton dissociation at the donor-acceptor interface.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Perovskite Materials and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Semiconducting polymers: the Third generation10.1039/b914956m ↗
2. Molecular design of photovoltaic materials for polymer solar cells: toward suitable electronic energy levels and broad absorption10.1021/ar2002446 ↗
3. Fabrication and processing of polymer solar cells: a review of printing and coating techniques10.1016/j.solmat.2008.10.004 ↗
4. Spin-coated small molecules for high performance solar cells10.1002/aenm.201100230 ↗
5. Solution-processed and high-performance organic solar cells using small molecules with a benzodithiophene unit10.1021/ja403318y ↗
6. 25th anniversary article: a decade of organic/polymeric photovoltaic research10.1002/adma.201302563 ↗
7. Small-molecule solar cells with efficiency over 9%10.1038/nphoton.2014.269 ↗
8. Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency10.1038/srep03356 ↗
9. Molecular design and ordering effects in π-functional materials for transistor and solar cell applications10.1021/ja2073643 ↗
10. Small molecule solution-processed bulk heterojunction solar cells10.1021/cm102189g ↗
11. A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO2 films10.1038/353737a0 ↗
12. A detailed study on the thermal, photo-physical and electrochemical properties and OFET applications of D–π–A–π–D structured unsymmetrical diketopyrrolopyrrole materials10.1039/C5RA16653E ↗
13. Design of benzodithiophene-diketopyrrolopyrrole based donor–acceptorcopolymers for efficient organic field effect transistors and polymer solar cells10.1039/c2jm34004f ↗
14. Development of fluorinated benzothiadiazole as a structural unit for a polymer solar cell of 7 % efficiency10.1002/anie.201005451 ↗
15. High-performance solar cells using a solution-processed small molecule containing benzodithiophene unit10.1002/adma.201102790 ↗
16. Solution-processable organic molecule photovoltaic materials with bithienyl-benzodithiophene central unit and indenedione end groups10.1021/cm400782q ↗
17. Synthesis, characterization, and photovoltaic properties of a low band gap polymer based on silole-containing polythiophenes and 2,1,3-benzothiadiazole10.1021/ja806687u ↗
18. Nanomorphology and charge generation in bulk heterojunctions based on low-bandgap dithiophene polymers with different bridging atoms10.1002/adfm.200900931 ↗
19. Influence of the bridging atom on the performance of a low-bandgap bulk heterojunction solar cell10.1002/adma.200900529 ↗
20. Silicon atom substitution enhances interchain packing in a thiophene-based polymer system10.1002/adma.200902469 ↗
21. Streamlined microwave-assisted preparation of narrow-bandgap conjugated polymers for high-performance bulk heterojunction solar cells10.1038/nchem.403 ↗
22. Effect of bridging atom identity on the morphological behavior of solution-processed small molecule bulk heterojunction photovoltaics10.1021/cm4001416 ↗
23. Impact of regiochemistry and isoelectronic bridgehead substitution on the molecular shape and bulk organization of narrow bandgap chromophores10.1021/ja310694t ↗
24. Effect of thermal annealing on active layer morphology and performance for small molecule bulk heterojunction organic solar cells10.1039/C4TC00994K ↗
25. Solvent annealing control of bulk heterojunction organic solar cells with 6.6% efficiency based on a benzodithiophene donor core and dicyano acceptor units10.1021/acs.jpcc.5b07130 ↗
26. Solution processed organic solar cells based on A–D–D′–D–A small molecule with benzo[1,2-b:4,5-b′]dithiophene donor (D′) unit, cyclopentadithiophene donor (D) and ethylrhodanine acceptor unit having 6% light to energy conversion efficiency10.1039/C4TA05807K ↗
27. New molecular donors with dithienopyrrole as the electron-donating group for efficient small-molecule organic solar cells10.1021/cm5018147 ↗
28. Functional tuning of A-D-A oligothiophenes: the effect of solvent vapor annealing on blend morphology and solar cell performance10.1039/C5TA02877A ↗
29. Donor–acceptor–donor (D–A–D) molecules based on isoindigo as active material for organic solar cells10.1039/C2NJ40879A ↗
30. Evaluation of bis-dicyanovinyl short-chain conjugated systems as donor materials for organic solar cells10.1016/j.solmat.2010.08.032 ↗
31. A donor–acceptor–donor (D–A–D) molecule based on 3-alkoxy-4-cyanothiophene and dithienopyrrole units as active material for organic solar cells10.1039/c2nj40513j ↗
32. Understanding the effect of solvent vapor annealing on solution-processed A-D-A oligothiophene bulk-heterojunction solar cells: the role of alkyl side chains10.1039/C5TA07713C ↗
33. Dithienopyrrole-based oligothiophenes for solution-processed organic solar cells10.1039/c3cc46066e ↗
34. Acceptor-donor-acceptor oligomers containing dithieno[3,2-b:2′,3′-d]pyrrole and Thieno[2,3-c]pyrrole-4,6-dione units for solution-processed organic solar cells10.1021/ol500809e ↗
35. Synthesis of new dithieno[3,2-b:2′,3′-d]pyrrole (DTP) units for photovoltaic cells10.1016/j.dyepig.2016.01.007 ↗
36. Impact of structure and homo-coupling of the central donor unit of small molecule organic semiconductors on solar cell performance10.1039/C6RA06146J ↗
37. Highly conjugated side-chain-substituted benzo[1,2-b:4,5-b′]dithiophene-based conjugated polymers for use in polymer solar cells10.1021/ma402245t ↗
38. Benzo[1,2-b:4,5-b′]dithiophene-fumaronitrile-based D-A type copolymers with different π-bridges: synthesis, characterization and photovoltaic properties10.1016/j.synthmet.2013.11.019 ↗
39. Influence of intermolecular interactions of electron donating small molecules on their molecular packing and performance in organic electronic devices10.1039/c3ta13266h ↗
40. Peculiarity of two thermodynamically-stable morphologies and their impact on the efficiency of small molecule bulk heterojunction solar cells10.1038/srep13407 ↗
41. Tri-diketopyrrolopyrrole molecular donor materials for high-performance solution-processed bulk heterojunction solar cells10.1002/adma.201302007 ↗
42. Two-layer organic photovoltaic cell10.1063/1.96937 ↗
43. Density-functional exchange-energy approximation with correct asymptotic behavior10.1103/PhysRevA.38.3098 ↗
44. Density-functional thermochemistry. III. The role of exact exchange10.1063/1.464913 ↗
45. Development of the colle-salvetti correlation-energy formula into a functional of the electron density10.1103/PhysRevB.37.785 ↗
46. The influence of polarization functions on molecular orbital hydrogenation energies10.1007/BF00533485 ↗
47. Self-consistent molecular orbital methods. XXIII. A polarization-type basis set for second-row elements10.1063/1.444267 ↗
48. An improved 6-31G* basis set for first-row transition metals10.1063/1.476673 ↗
49. Generalized gradient approximation made simple10.1103/PhysRevLett.77.3865 ↗
50. Zhao · Theor. Chem. Acc. · 2008 · 120 · 21510.1007/s00214-007-0310-x ↗
51. Ab initio study of solvated molecules: a new implementation of the polarizable continuum model10.1016/0009-2614(96)00349-1 ↗
52. Frisch · 2010
53. cclib: a library for package-independent computational chemistry algorithms10.1002/jcc.20823 ↗
54. Materials design considerations for charge generation in organic solar cells10.1021/cm402403z ↗
55. Effects of shortened alkyl chains on solution-processable small molecules with oxo-alkylated nitrile end-capped acceptors for high-performance organic solar cells10.1002/aenm.201400538 ↗
56. Efficient solution processed D1-A-D2-A-D1 small molecules bulk heterojunction solar cells based on alkoxy triphenylamine and benzo[1,2-b:4,5-b/]thiophene units10.1016/j.orgel.2015.07.014 ↗
57. Effect of temperature and illumination on the electrical characteristics of polymer–fullerene bulk-heterojunction solar cells10.1002/adfm.200304399 ↗
58. Cooperative plasmonic effect of Ag and Au nanoparticles on enhancing performance of polymer solar cells10.1021/nl3034398 ↗
59. Device physics of polymer:fullerene bulk heterojunction solar cells10.1002/adma.200601093 ↗
60. Charge transport and photocurrent generation in Poly(3-hexylthiophene): methanofullerene bulk-heterojunction solar cells10.1002/adfm.200500420 ↗
61. Effect of self-organization in polymer/fullerene bulk heterojunctions on solar cell performance10.1063/1.2335377 ↗
62. Simultaneous enhancement of open-circuit voltage, short-circuit current density, and fill factor in polymer solar cells10.1002/adma.201103006 ↗
63. Relationship between interchain interaction, exciton delocalization, and charge separation in low-bandgap copolymer blends10.1021/ja503465s ↗
64. New Insights into morphology of high performance BHJ photovoltaics revealed by high resolution AFM10.1021/nl5025326 ↗
65. Charge photogeneration in organic solar cells10.1021/cr900271s ↗
66. Effects of solvent additives on morphology, charge generation, transport, and recombination in solution-processed small-molecule solar cells10.1002/aenm.201301469 ↗