Terthiophene based non-fused electron acceptors for efficient organic solar cells
Source abstract
Abstract
Designing electron acceptors with fully non-fused chemical structures is an effective method to solve the cost issue in the application of organic solar cells (OSCs). In this work, two A-D-A type non-fullerene acceptors (NFAs) with easy synthesis processes, namely A3T-2 and A3T-5, were designed and synthesized by using non-fused terthiophene as the D-skeleton and “open mode” or “closed-loop mode” substituted functional groups as the side chain modifiers, respectively. The two NFAs show similar molecular energy levels, while the calculation results and the absorption spectra indicate that A3T-5 has a more stable and planar conformation, which is beneficial to realize efficient charge transport capability. The OSCs based on A3T-2 and A3T-5 were fabricated by using PBDB-TF as the electron donor in parallel, and the power conversion efficiencies are 6.20% and 7.03%, respectively, which are high values among the OSCs based on non-fused NFAs with terthiophene as D-cores. The more stable planar molecular conformation of A3T-5 and the lower miscibility in the PBDB-TF: A3T-5 blend enabled the higher current and the PCE obtained in PBDB-TF: A3T-5-based OSC than that of PBDB-TF: A3T-2-based one. This work shows great potential in realizing efficient photovoltaic properties by employing non-fused acceptors via appropriate molecular design.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Conducting polymers and applications · Molecular Junctions and Nanostructures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. An electron acceptor challenging fullerenes for efficient polymer solar cells10.1002/adma.201404317 ↗
2. Single-Junction organic solar cell with over 15% efficiency using fused-ring acceptor with electron-deficient core10.1016/j.joule.2019.01.004 ↗
3. Alkyl chain tuning of small molecule acceptors for efficient organic solar cells10.1016/j.joule.2019.09.010 ↗
4. Solution-processable n-doped graphene-containing cathode interfacial materials for high-performance organic solar cells10.1039/C9EE02433F ↗
5. Barrierless free charge generation in the high-performance PM6:Y6 bulk heterojunction non-fullerene solar cell10.1002/adma.201906763 ↗
6. A-DA'D-A non-fullerene acceptors for high-performance organic solar cells10.1007/s11426-020-9799-4 ↗
7. Delocalization of exciton and electron wavefunction in non-fullerene acceptor molecules enables efficient organic solar cells10.1038/s41467-020-17867-1 ↗
8. Tuning the electron-deficient core of a non-fullerene acceptor to achieve over 17% efficiency in a single-junction organic solar cell10.1039/D0EE00862A ↗
9. Ternary polymer solar cells with alloyed donor achieving 14.13% efficiency and 78.4% fill factor10.1016/j.nanoen.2019.04.018 ↗
10. Optimization requirements of efficient polythiophene:nonfullerene organic solar cells10.1016/j.joule.2020.04.014 ↗
11. A universal layer-by-layer solution-processing approach for efficient non-fullerene organic solar cells10.1039/C8EE02560F ↗
12. Organic tandem solar cells: a review10.1039/b817952b ↗
13. Effect of core size on performance of fused-ring electron acceptors10.1021/acs.chemmater.8b02222 ↗
14. Molecular engineering of central fused-ring cores of non-fullerene acceptors for high-efficiency organic solar cells10.1039/C8TA12465E ↗
15. Ladder-type nonacyclic structure consisting of alternate thiophene and benzene units for efficient conventional and inverted organic photovoltaics10.1021/cm202612t ↗
16. A simple electron acceptor with unfused backbone for polymer solar cells10.3866/PKU.WHXB201805091 ↗
17. Simple non-fused electron acceptors for efficient and stable organic solar cells10.1038/s41467-019-10098-z ↗
18. Near-infrared electron acceptors with unfused architecture for efficient organic solar cells10.1021/acsami.0c00837 ↗
19. A non-fullerene acceptor enables efficient P3HT-based organic solar cells with small voltage loss and thickness insensitivity10.1016/j.cclet.2019.01.010 ↗
20. Enhanced intramolecular charge transfer of unfused electron acceptors for efficient organic solar cells10.1039/C8QM00609A ↗
21. Over 17% efficiency of ternary organic photovoltaics employing two acceptors with an acceptor–donor–acceptor configuration10.1021/acsami.1c15896 ↗
22. Nonfused nonfullerene acceptors with an A–D–a′–D–A framework and a benzothiadiazole core for high-performance organic solar cells10.1021/acsami.0c01850 ↗
23. High-performance and low-energy loss organic solar cells with non-fused ring acceptor by alkyl chain engineering10.1016/j.cej.2021.129768 ↗
24. Hybrid nonfused-ring electron acceptors with fullerene pendant for high-efficiency organic solar cells10.1021/acsami.0c19632 ↗
25. A fully non-fused ring acceptor with planar backbone and near-IR absorption for high performance polymer solar cells10.1002/anie.202010856 ↗
26. High-efficiency organic solar cells based on a low-cost fully non-fused electron acceptor10.1002/adfm.202101742 ↗
27. Completely non-fused electron acceptor with 3D-interpenetrated crystalline structure enables efficient and stable organic solar cell10.1038/s41467-021-25394-w ↗
28. Simple non-fused electron acceptors leading to efficient organic photovoltaics10.1002/anie.202101867 ↗
29. Conformation locking of simple nonfused electron acceptors via multiple intramolecular noncovalent bonds to improve the performances of organic solar cells10.1021/acsaem.0c02719 ↗
30. Molecular insights of exceptionally photostable electron acceptors for organic photovoltaics10.1038/s41467-021-23389-1 ↗
31. Planar copolymers for high-efficiency polymer solar cells10.1007/s11426-018-9363-8 ↗
32. Designing high performance conjugated materials for photovoltaic cells with the aid of intramolecular noncovalent interactions10.1039/D0CC07086F ↗
33. Regulating molecular orientations of dipyran-based nonfullerene acceptors through side-chain engineering at the π-bridge10.1039/D0TA06394K ↗
34. Photovoltaic performances of fused ring acceptors with isomerized ladder-type dipyran cores10.1021/acsami.9b19676 ↗
35. A wide band gap polymer with a deep highest occupied molecular orbital level enables 14.2% efficiency in polymer solar cells10.1021/jacs.8b02695 ↗
36. Organic solar cells based on non-fullerene acceptors10.1038/nmat5063 ↗
37. Simple, reliable, and universal metrics of molecular planarity10.1007/s00894-021-04884-0 ↗
38. Multiwfn: a multifunctional wavefunction analyzer10.1002/jcc.22885 ↗
39. VMD: Visual molecular dynamics10.1016/0263-7855(96)00018-5 ↗
40. Morphology and phase segregation of spin-casted films of Polyfluorene/PCBM blends10.1021/ma070712a ↗
41. Wide bandgap polymer with narrow photon harvesting in visible light range enables efficient semitransparent organic photovoltaics10.1002/adfm.202107934 ↗
42. Molecular-weight-dependent mobilities in regioregular poly(3-hexyl-thiophene) diodes10.1063/1.1891301 ↗