Influence of the surface treatment of PEDOT:PSS layer with high boiling point solvent on the performance of inverted planar perovskite solar cells
Source abstract
Abstract
Abstract Since perovskite precursor solution is typically prepared from high boiling point solvents, understanding the effect of high boiling point solvent treatment of the PEDOT:PSS layer on the performance of perovskite solar cells is important for device processing optimization. In this paper, influence of the surface treatment of the PEDOT:PSS layer with high boiling point solvent, including N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and ethylene glycol (EG), on the device performance of the perovskite solar cells was investigated. Increased conductivity was measured for the PEDOT:PSS film after solvent treatments, which was ascribed to the partial removal of PSS component from the PEDOT:PSS layer, as evidenced by the UV–vis absorption spectroscopy and XPS spectroscopy. In comparison with the reference cell, poorer device performance was obtained for the perovskite solar cells directly deposited on the solvent washed PEDOT:PSS film, which was ascribed to the increased pin hole density of the perovskite films. However, insertion of a thin PSSNa layer between the PEDOT:PSS layer and the perovskite layer greatly improved device performance, demonstrating that PSS-rich surface is favorite for the crystal growth of the perovskite film. Increased external quantum efficiency over 600–750 nm was measured for the cells based on solvent treated PEDOT:PSS layer, leading to a short circuit current and the consequent performance enhancement.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. High efficiency stable inverted perovskite solar cells without current hysteresis10.1039/C5EE00645G ↗
2. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility10.1021/nn406020d ↗
3. Advances in perovskite solar cells10.1002/advs.201500324 ↗
4. Roll-to-roll micro-gravure printed large-area zinc oxide thin film as the electron transport layer for solution-processed polymer solar cells10.1016/j.orgel.2017.03.015 ↗
5. Large-area perovskite nanowire arrays fabricated by large-scale roll-to-roll micro-gravure printing and doctor blading10.1039/C5NR08277C ↗
6. Efficient planar heterojunction perovskite solar cells fabricated by in-situ thermal-annealing doctor blading in ambient condition10.1016/j.orgel.2017.03.017 ↗
7. Toward large scale roll-to-roll production of fully printed perovskite solar cells10.1002/adma.201404598 ↗
8. Vacuum-assisted thermal annealing of CH3NH3PbI3 for highly stable and efficient perovskite solar cells10.1021/nn505978r ↗
9. Understanding the formation and evolution of interdiffusion grown organolead halide perovskite thin films by thermal annealing10.1039/C4TA04007D ↗
10. Effect of annealing temperature on film morphology of organic-inorganic hybrid pervoskite solid-state solar cells10.1002/adfm.201304022 ↗
11. Nanocrystalline rutile electron extraction layer enables low-temperature solution processed perovskite photovoltaics with 13.7% efficiency10.1021/nl500399m ↗
12. Room temperature fabrication of CH3NH3PbBr3 by anti-solvent assisted crystallization approach for perovskite solar cells with fast response and small J–V hysteresis10.1016/j.nanoen.2015.08.023 ↗
13. Formation of ultrasmooth perovskite films toward highly efficient inverted planar heterojunction solar cells by micro-flowing anti-solvent deposition in air10.1039/C6TA00253F ↗
14. Thermal flow air post-treatment under high relative humidity for efficient and reproducible planar CH3NH3PbI3-xClx based perovskite solar cells10.1007/s11082-016-0819-0 ↗
15. Air-assisted flow and two-step spin-coating for highly efficient CH3NH3PbI3 perovskite solar cells10.7567/JJAP.55.02BF08 ↗
16. Perovskite solar cells and large area modules (100 cm2) based on an air flow-assisted PbI2 blade coating deposition process10.1016/j.jpowsour.2014.12.008 ↗
17. An 80.11% FF record achieved for perovskite solar cells by using the NH4Cl additive10.1039/C4NR02425G ↗
18. Prominent efficiency enhancement in perovskite solar cells employing silica-coated gold nanorods10.1021/acs.jpcc.6b00309 ↗
19. Bulk heterojunctions push the photoresponse of perovskite solar cells to 970 nm10.1039/C4TA04482G ↗
20. High-efficiency solution-processed planar perovskite solar cells with a polymer hole transport layer10.1002/aenm.201401855 ↗
21. High-performance hole-extraction layer of sol-gel-processed NiO nanocrystals for inverted planar perovskite solar cells10.1002/ange.201405176 ↗
22. Efficient planar heterojunction perovskite solar cells employing graphene oxide as hole conductor10.1039/C4NR03181D ↗
23. CH3NH3PbI3 perovskite/fullerene planar-heterojunction hybrid solar cells10.1002/adma.201301327 ↗
24. Effect of UV-ozone treatment on electrical properties of PEDOT: PSS film10.1016/j.orgel.2010.11.009 ↗
25. Improved performance of inverted planar perovskite solar cells with F4-TCNQ doped PEDOT: PSS hole transport layers10.1039/C6TA10212C ↗
26. The solvent treatment effect of the PEDOT: PSS anode interlayer in inverted planar perovskite solar cells10.1039/C5RA25787E ↗
27. On the mechanism of conductivity enhancement in poly (3, 4-ethylenedioxythiophene): poly (styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
28. Effects of organic inorganic hybrid perovskite materials on the electronic properties and morphology of poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate) and the photovoltaic performance of planar perovskite solar cells10.1039/C5TA03456F ↗
29. PEDOT: PSS films with significantly enhanced conductivities induced by preferential solvation with cosolvents and their application in polymer photovoltaic cells10.1039/c0jm04177g ↗
30. Highly conductive PEDOT: PSS electrode with optimized solvent and thermal post-treatment for ITO-free organic solar cells10.1002/adfm.201002290 ↗
31. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
32. Additive enhanced crystallization of solution-processed perovskite for highly efficient planar-heterojunction solar cells10.1002/adma.201400231 ↗
33. A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells10.1002/ange.201405334 ↗
34. Highly conductive PEDOT: PSS microfibers fabricated by wet-spinning and dip-treatment in ethylene glycol10.1016/j.eurpolymj.2008.10.027 ↗
35. Improvement in the photovoltaic efficiency of polymer solar cells by treating the poly (3, 4-ethylenedioxythiophene): poly (styrenesulfonate) buffer layer with co-solvents of hydrophilic organic solvents and hydrophobic 1, 2-dichlorobenzene10.1016/j.solmat.2011.09.039 ↗
36. Photoelectron spectroscopy of thin films of PEDOT-PSS conjugated polymer blend: a mini-review and some new results10.1016/S0368-2048(01)00323-1 ↗
37. The origin of the high conductivity of poly (3, 4-ethylenedioxythiophene)-poly (styrenesulfonate)(PEDOT-PSS) plastic electrodes10.1021/cm061032+ ↗
38. Supramolecular halogen bond passivation of organic–inorganic halide perovskite solar cells10.1021/nl500627x ↗
39. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
40. Modified PEDOT layer makes a 1.52 V Voc for perovskite/PCBM solar cells10.1002/aenm.201601193 ↗