journal article·2020-03

Electrical property modified hole transport layer (PEDOT:PSS) enhance the efficiency of perovskite solar cells: Hybrid co-solvent post-treatment

Ping Li, Mohamed Ibrahim Omer Mohamed, Cunyun Xu, Xizu Wang, Xiaohong Tang

Publisher page

Abstract

Abstract Poly(3,4-ethylenedioxythiphene):poly(styrenesulfonate) (PEDOT:PSS) layer as a hole transport layer (HTL) plays a key role in efficient hole extraction and transportation of the inverted planar perovskite solar cells (PSCs). However, the insulating nature of PSS lead to lower electrical property of the PEDOT:PSS film, which impedes transferring hole and results in a low photocurrent of the PSCs. In this work, dimethylformamide (DMF), methanol and their mixture solvents (co-solvent) were employed to treat the PEOT:PSS thin film after deposition with different methods to enhance the film's electrical conductivity. Electrical conductivity of the PEDOT:PSS films was increased from 10−3 S cm−1 to ~102 S cm−1 after the co-solvents treatment. Using the highest conductivity co-solvent treated PEDOT:PSS thin film as the HTL in a perovskite solar cell, the power conversion efficiency (PCE) of the device has been measured improved by 17.5% as compared with that of the control device with the untreated PEDOT:PSS film as the HTL. This result shows that the hybrid co-solvent post-treatment is a simple and feasible way to modified the electrical properties of the PEDOT:PSS film as the HTL for high efficient PSCs and other thin film electronic and optoelectronic devices.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Perovskite Materials and Applications · Conducting polymers and applications · Organic Electronics and Photovoltaics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene:fullerene solar cells10.1038/nmat1574 ↗
2. Interfacial engineering for highly efficient organic solar cells10.1016/j.cap.2016.12.007 ↗
3. Enhanced outcoupling in down-conversion white organic light-emitting diodes using imprinted microlens array films with breath figure patterns10.1080/14686996.2018.1551040 ↗
4. Visual-attention-based pixel dimming technique for OLED displays of mobile devices10.1109/TIE.2018.2874582 ↗
5. Syed · J. Mater. Chem. C · 2019
6. PSS bilayer as hole transport layer for highly efficient and stable perovskite solar cells10.1016/j.orgel.2017.10.034 ↗
7. The role of buffer layers in polymer solar cells10.1039/C0EE00273A ↗
8. Conductivity, work function, and environmental stability of PEDOT: PSS thin films treated with sorbitol10.1016/j.orgel.2008.05.006 ↗
9. Poly(3,4-ethylenedioxythiophene) and its derivatives: past, present, and future10.1002/(SICI)1521-4095(200004)12:7<481::AID-ADMA481>3.0.CO;2-C ↗
10. Highly conductive PEDOT:PSS films prepared through a treatment with zwitterions and their application in polymer photovoltaic cells10.1039/c0jm01593h ↗
11. Effect of UV ozone treatment on electrical properties of PEDOT:PSS film10.1016/j.orgel.2010.11.009 ↗
12. Anion effect on salt-Induced conductivity enhancement of poly(3,4ethylenedioxythiophene):Poly(styrenesulfonate) films10.1016/j.orgel.2010.04.007 ↗
13. PEDOT:PSS films effect of organic solvent additives and annealing on the film conductivity10.1016/j.synthmet.2009.08.022 ↗
14. Influence of ionic liquids on the electrical conductivity and morphology of PEDOT:PSS films10.1021/cm070398z ↗
15. High-efficiency ITO-free polymer solar cells using highly conductive PEDOT:PSS/surfactant bilayer transparent anodes10.1039/c3ee41077c ↗
16. Salt-induced charge screening and significant conductivity enhancement of conducting poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)10.1021/ma900327d ↗
17. Enhancement of thermoelectric performance of PEDOT:PSS films by post-treatment with a superacid10.1039/C8RA02058B ↗
18. Simultaneously enhancing the cohesion and electrical conductivity of PEDOT:PSS conductive polymer films using DMSO additives10.1021/acsami.5b08753 ↗
19. A highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) film with the solvent bath treatment by dimethyl sulfoxide as cathode for polymer tantalum capacitor10.1016/j.cplett.2016.04.095 ↗
20. Influence of doped PEDOT:PSS on the performance of polymer solar cells10.1016/j.solmat.2011.04.040 ↗
21. Hole transport enhancing effects of polar solvents on poly(3,4ethylenedioxythiophene):poly(styrene sulfonic acid) for organic solar cells10.1021/am301320m ↗
22. Perovskite solar cells with a DMSO-treated PEDOT: PSS hole transport layer exhibit higher photovoltaic performance and enhanced durability10.1039/C6NR08375G ↗
23. Effective treatment methods on PEDOT:PSS to enhance its thermoelectric performance10.1016/j.synthmet.2016.11.011 ↗
24. Thermoelectric performance enhancement of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) composite films by addition of dimethyl sulfoxide and urea10.1007/s11664-012-2162-y ↗
25. Effects of organic inorganic hybrid perovskite materials on the electronic properties and morphology of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) and the photovoltaic performance of planar perovskite solar cells10.1039/C5TA03456F ↗
26. Charge-carrier balance for highly efficient inverted planar heterojunction perovskite solar cells10.1002/adma.201604048 ↗
27. On the mechanism of conductivity enhancement in poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) film through solvent treatment10.1016/j.polymer.2004.10.001 ↗
28. Highly electrical and thermoelectric properties of PEDOT:PSS thin film via direct dilution-filtration10.1039/C5RA07820B ↗
29. Highly conducting free-standing poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) films with improved thermoelectric performances10.1016/j.synthmet.2010.09.031 ↗
30. Roles of polyethylenimine ethoxylated in efficiently tuning the thermoelectric performance of poly(3,4-ethylenedioxythiophene)-rich nanocrystal films10.1021/acsami.9b00298 ↗
31. Improving the conductivity of PEDOT:PSS hole transport layer in polymer solar cells via copper(II) bromide salt doping10.1021/am505387q ↗
32. Non-wetting surface-driven high-aspect-ratio crystalline grain growth for efficient hybrid perovskite solar cells10.1038/ncomms8747 ↗
33. Tuning the light emission properties by band gap engineering in hybrid lead halide perovskite10.1021/ja511198f ↗
34. Interface engineering in planar perovskite solar cells: energy level alignment, perovskite morphology control and high performance achievement10.1039/C6TA08783C ↗
35. Enhanced efficiency and stability of inverted perovskite solar cells using highly crystalline SnO2 nanocrystals as the robust electron-transporting layer10.1002/adma.201600619 ↗
36. J. chang, simultaneously enhanced performance and stability of inverted perovskite solar cells via a rational design of hole transport laye10.1016/j.orgel.2019.04.035 ↗