Electrohydrodynamic (EHD) jet printing of carbon-black composites for solution-processed organic field-effect transistors
Source abstract
Abstract
Abstract In this study, carbon-black (CB) conductive electrodes were successfully printed using the high-resolution electrohydrodynamic (EHD) jet printing technique. The wrapping of CB bundles with a polymeric surfactant, Triton X-100 (TX-100), enabled the CB/TX-100 composites to well disperse in ethanol/deionized water for use in the preparation of conductive inks for EHD jet printing. By adjusting the voltage and operation distance, the applied electrostatic and gravity forces to the loaded CB/TX-100 inks overcame the fluid forces (viscosity and surface tension) to elongate the droplet and provide continuous jet lines, where the ink widths were smaller than the diameter of the nozzle. The EHD-printed CB/TX-100 in the stable cone-jet mode formed conductive lines and various pattern shapes. These conductive lines were utilized as source and drain electrodes of organic field-effect transistors (OFETs) with solution-processed organic semiconductors. The OFET with printed CB/TX-100 electrodes exhibited better electrical performances, including a higher saturation mobility and smaller hysteresis, than those of the reference OFET with Au electrodes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrohydrodynamics and Fluid Dynamics · Electrowetting and Microfluidic Technologies · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. High-performance solution-processable flexible and transparent conducting electrodes with embedded Cu mesh10.1039/C8TC00307F ↗
2. A self-healable, highly stretchable, and solution processable conductive polymer composite for ultrasensitive strain and pressure sensing10.1002/adfm.201705551 ↗
3. Gravure printing of graphene for large-area flexible electronics10.1002/adma.201401052 ↗
4. Charge-transport model for conducting polymers10.1038/nmat4784 ↗
5. Effective way to enhance the electrode performance of multiwall carbon nanotube and poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) composite using HCl–methanol treatment10.1021/acs.jpcc.6b01747 ↗
6. Fabrication of high-performance composite electrodes composed of multiwalled carbon nanotubes and glycerol-doped poly(3,4-ethylenedioxythiophene):polystyrene sulfonate for use in organic devices10.1039/C5TC00882D ↗
7. Inkjet printing high-resolution, large-area graphene patterns by coffee-ring lithography10.1002/adma.201103620 ↗
8. Directly drawn organic transistors by capillary pen: a new facile patterning method using capillary action for soluble organic materials10.1002/adma.201300006 ↗
9. Inkjet printing of single-crystal films10.1038/nature10313 ↗
10. Printed oxide thin film transistors: a mini review10.1149/2.0071504jss ↗
11. Direct patterning of conductive carbon nanotube/polystyrene sulfonate composites via electrohydrodynamic jet printing for use in organic field-effect transistors10.1039/C6TC01371F ↗
12. The effect of surfactants on electrohydrodynamic jet printing and the performance of organic field-effect transistors10.1039/C7CP06142K ↗
13. Electrohydrodynamic printing for advanced micro/nanomanufacturing: current progresses, opportunities, and challenges10.1115/1.4041934 ↗
14. A high speed electrohydrodynamic (EHD) jet printing method for line printing10.1088/1361-6439/aa7c6b ↗
15. Direct patterning of conductive carbon nanotube/polystyrene sulfonate composites via electrohydrodynamic jet printing for use in organic field-effect transistors10.1039/C6TC01371F ↗
16. Large-scale organic nanowire lithography and electronics10.1038/ncomms2785 ↗
17. Directly drawn poly(3-hexylthiophene) field-effect transistors by electrohydrodynamic jet printing: improving performance with surface modification10.1021/am502595a ↗
18. Electrohydrodynamic direct-writing10.1039/c3nr04329k ↗
19. Electrical, thermal, and rheological properties of carbon black and carbon nanotube dual filler-incorporated poly(dimethylsiloxane) nanocomposites10.1007/s13233-012-0066-6 ↗
20. Carbon black vs. black carbon and other airborne materials containing elemental carbon: physical and chemical distinctions10.1016/j.envpol.2013.06.009 ↗
21. Invisible metal-grid transparent electrode prepared by electrohydrodynamic (EHD) jet printing10.1088/0022-3727/46/15/155103 ↗
22. High resolution patterning of Ag nanowire flexible transparent electrode via electrohydrodynamic jet printing of acrylic polymer-silicate nanoparticle composite overcoating layer10.1016/j.orgel.2018.08.032 ↗
23. High weight fraction surfactant solubilization of single-wall carbon nanotubes in water10.1021/nl025924u ↗
24. Directly drawn ZnO semiconductors and MWCNT/PSS electrodes via electrohydrodynamic jet printing for use in thin-film transistors: the ideal combination for reliable device performances10.1016/j.orgel.2016.10.020 ↗
25. High-performance organic complementary inverters using monolayer graphene electrodes10.1021/am500618g ↗
26. Surface-directed molecular assembly of pentacene on monolayer graphene for high-performance organic transistors10.1021/ja1097463 ↗
27. Control of the morphology and structural development of solution-processed functionalized acenes for high-performance organic transistors10.1002/adfm.200801135 ↗
28. Direct writing and aligning of small-molecule organic semiconductor crystals via "dragging mode" electrohydrodynamic jet printing for flexible organic field-effect transistor arrays10.1021/acs.jpclett.7b02590 ↗
29. A lattice-strained organic single-crystal nanowire array fabricated via solution-phase nanograting-assisted pattern transfer for use in high-mobility organic field-effect transistors10.1002/adma.201506062 ↗
30. Direct printing of soluble acene crystal stripes by a programmed dip-coating process for organic field-effect transistor applications10.1039/C7TC04118G ↗
31. Directly drawn organic transistors by capillary pen: a new facile patterning method using capillary action for soluble organic materials10.1002/adma.201300006 ↗
32. Solution-processed organic field-effect transistors composed of poly(4-styrene sulfonate) wrapped multiwalled carbon nanotube source/drain electrodes10.1016/j.orgel.2008.11.008 ↗
33. Photopatternable source/drain electrodes using multiwalled carbon nanotube/polymer nanocomposites for organic field-effect transistors10.1021/am900483y ↗
34. Improved n-type bottom-contact organic transistors by introducing a poly(3,4-ethylenedioxythiophene):poly(4-styrne sulfonate) coating on the source/drain electrodes10.1063/1.3488817 ↗
35. Photopatternable poly(4-styrene sulfonic acid)-wrapped MWNT thin-film source/drain electrodes for use in organic field-effect transistors10.1021/am1008826 ↗
36. Ink-jet printed 6,13-bis(triisopropylsilylethynyl) pentacene organic thin-film transistors for particle based electronic papers10.1149/1.2980562 ↗
37. Tuning of Ag work functions by self-assembled monolayers of aromatic thiols for an efficient hole injection for solution processed triisopropylsilylethynyl pentacene organic thin film transistors10.1063/1.2907691 ↗