Solvent-dependent electrical properties improvement of organic field-effect transistor based on disordered conjugated polymer/insulator blends
Source abstract
Abstract
Abstract Poly(3-hexylthiophene) (P3HT):polystyrene (PS) blends prepared from different solvents were used as the semiconducting layers in organic field-effect transistors (OFETs). The relationship between the molecular arrangement, aggregation and charge transport in P3HT:PS blends with the boil-points and solubility of different solvents were systematically analyzed. Topographic investigation by atomic force microscopy carried out on blends with various solvents revealed a lateral phase separation of the two components, which was strongly influenced by the choice of solvent. Although the blend film was highly disordered, the OFETs performed as well as that with the pristine P3HT films. Moreover, 1,2-dichlorobenzene with the high boiling temperature was found to be more desirable for achieving distinct lateral aggregation of P3HT in the blend film, which led to the superior performance of the OFET. X-ray diffraction analyses and optical absorption measurements revealed that PS matrix made the arrangement of P3HT molecules more disordered, but introduced a more efficient intermolecular coupling of P3HT molecules. This could be ascribed to that, the PS matrix made the aggregating rates of the P3HT molecules slower, inducing a uniform distribution of P3HT molecules in the blend film. This was beneficial for the efficient charge transport in the blend film, which provided a pathway between the aggregations and acted as a tie-molecule in the blend film. Consequently, the field-effect mobility of the optimized OFET (1.6 wt% P3HT) increased three times and the current on/off ratio increased two times compared to that of the pure P3HT (8 wt%). This work will fill the gap of current research about semiconductor/insulator blend transistor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Electronics and Photovoltaics · Perovskite Materials and Applications · Thin-Film Transistor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Organic tribotronic transistor for contact-electrification-gated light-emitting diode
2. Stretchable active-matrix organic light-emitting diode display using printable elastic conductors10.1038/nmat2459 ↗
3. Organic transistors in optical displays and microelectronic applications10.1002/adma.200903559 ↗
4. Ultralow-power organic complementary circuits10.1038/nature05533 ↗
5. High performance unipolar inverters by utilizing organic field-effect transistors with ultraviolet/ozone treated polystyrene dielectric10.1063/1.4895121 ↗
6. Flexible suspended gate organic thin-film transistors for ultra-sensitive pressure detection10.1038/ncomms7269 ↗
7. Polymer dielectric layer functionality in organic field-effect transistor based ammonia gas sensor10.1016/j.orgel.2013.09.018 ↗
8. Flexible spray-coated TIPS-pentacene organic thin-film transistors as ammonia gas sensors10.1039/c3tc31412j ↗
9. Low-voltage organic transistors with steep subthreshold slope fabricated on commercially available paper10.1016/j.orgel.2015.06.038 ↗
10. Charge-transport anisotropy due to grain boundaries in directionally crystallized thin films of regioregular poly(3-hexylthiophene)10.1002/adma.200802722 ↗
11. 25th anniversary article: key points for high-mobility organic field-effect transistors10.1002/adma.201302514 ↗
12. Undoped polythiophene field-effect transistors with mobility of 1cm2V−1s−110.1063/1.2824845 ↗
13. Ultrahigh mobility in polymer field-effect transistors by design10.1021/ja108861q ↗
14. Organic field-effect transistors based on highly ordered single polymer fibers10.1002/adma.201103057 ↗
15. Siloxane-terminated solubilizing side chains: bringing conjugated polymer backbones closer and boosting hole mobilities in thin-film transistors10.1021/ja209328m ↗
16. Ambipolar polymer field-effect transistors based on fluorinated isoindigo: high performance and improved ambient stability10.1021/ja310283f ↗
17. Diketopyrrolopyrrole-based π-conjugated copolymer containing β-unsubstituted quintetthiophene unit: a promising material exhibiting high hole-mobility for organic thin-film transistors10.1021/cm302341m ↗
18. A stable solution-processed polymer semiconductor with record high-mobility for printed transistors10.1038/srep00754 ↗
19. 25th Anniversary Article: Microstructure Dependent Bias Stability of Organic Transistors10.1002/adma.201304665 ↗
20. Effects of processing additive on bipolar field-effect transistors based on blends of poly(3-hexylthiophene) and fullerene bearing long alkyl tails10.1016/j.orgel.2014.02.003 ↗
21. Low-voltage polymer/small-molecule blend organic thin-film transistors and circuits fabricated via spray deposition10.1063/1.4922194 ↗
22. Thickness-dependent electrical properties of soluble acene-polymer blend semiconductors10.1016/j.orgel.2015.05.030 ↗
23. Solution-processed ambipolar organic thin-film transistors by blending p- and n-type semiconductors: solid solution versus microphase separation
24. Performance improvement of organic field-effect transistor ammonia gas sensor using ZnO/PMMA hybrid as dielectric layer10.1016/j.snb.2014.06.083 ↗
25. Self-stratified semiconductor/dielectric polymer blends: vertical phase separation for facile fabrication of organic transistors10.1039/c3tc30257a ↗
26. Moderate doping leads to high performance of semiconductor/insulator polymer blend transistors
27. Two-dimensional charge transport in self-organized, high-mobility conjugated polymers10.1038/44359 ↗
28. Relation between microstructure and charge transport in polymers of different regioregularity10.1021/jp207026s ↗
29. Unconventional face-on texture and exceptional in-plane order of a high mobility n-type polymer10.1002/adma.201001202 ↗
30. π-conjugated polymers for organic electronics and photovoltaic cell applications10.1021/cm102419z ↗
31. Solvent and polymer matrix effects on TIPS-pentacene/polymer blend organic field-effect transistors10.1039/c2jm16487f ↗
32. Ultrathin film organic transistors: precise control of semiconductor thickness via spin-coating10.1002/adma.201204075 ↗
33. Multicomponent semiconducting polymer systems with low crystallization-induced percolation threshold10.1038/nmat1779 ↗
34. Effects of thermal annealing upon the morphology of polymer-fullerene blends10.1002/adfm.201000975 ↗
35. A systematic approach to solvent selection based on cohesive energy densities in a molecular bulk heterojunction system10.1002/aenm.201000054 ↗
36. Determining exciton bandwidth and film microstructure in polythiophene films using linear absorption spectroscopy10.1063/1.3110904 ↗
37. Modeling disorder in polymer aggregates: the optical spectroscopy of regioregular poly(3-hexylthiophene) thin films10.1063/1.1914768 ↗
38. Role of intermolecular coupling in the photophysics of disordered organic semiconductors: aggregate emission in regioregular polythiophene10.1103/PhysRevLett.98.206406 ↗
39. Effect of mesoscale crystalline structure on the field-effect mobility of regioregular poly(3-hexyl thiophene) in thin-film transistors10.1002/adfm.200400297 ↗
40. Organic thin-film transistors based on polythiophene nanowires embedded in insulating polymer10.1002/adma.200802880 ↗
41. High mobility organic field-effect transistor based on water-soluble deoxyribonucleic acid via spray coating10.1063/1.4907325 ↗
42. Solution-processed organic transistors based on semiconducting blends10.1039/b921674j ↗
43. H2O effect on the stability of organic thin-film field-effect transistors10.1063/1.1604193 ↗